What transmission does the Audi RS4 use?

Which car has a dragonfly logo?

The car with a dragonfly logo is the CH-Auto (Great Wall Huaguan) QianTu. The CH-Auto QianTu was officially launched at the Beijing Auto Show in April 2014. The new car features a sharp design with a low-slung body that creates a full-fledged sports car appearance. Additionally, its positioning as a pure electric sports car makes its identity quite unique. Additional information: 1. The electric vehicle launched by CH-Auto is named QianTu. 2. The car's dimensions are 4628×2064×1254mm, with a wheelbase of 2650mm. The front and rear tracks are 1780/1755mm respectively, featuring unequal wheelbases. 3. The vehicle body is constructed with a large number of aluminum components, and the surface is covered with carbon fiber materials. 4. The QianTu is equipped with a lithium-ion battery with a capacity of 42.1kWh. The vehicle adopts a front double-wishbone and rear double-wishbone suspension combination.

14

5

Share

Where is the air conditioning filter of Dongfeng Peugeot 207 located?

The air conditioning filter of Peugeot 207 is located on the right side of the engine, in front of the passenger seat. There is a large hole above the shock absorber, and you can see the air conditioning filter by squatting down. The car air conditioning filter uses high-efficiency adsorption material - activated carbon composite filter cloth combined with long-fiber non-woven fabric, which can effectively filter smoke odor, pollen, dust, harmful gases, and various odors. Here is some extended information: 1. Models: Dongfeng Peugeot 207 has both sedan and hatchback versions. The engine configurations for these two models are 16-valve 1.6L and 1.4L inline 4-cylinder gasoline engines. The 1.4L version only comes with a manual transmission, while the 1.6L version offers both manual and automatic transmissions. 2. Exterior: The front face of the Peugeot 207 incorporates a large number of family-style design elements, reflecting the French artistic aesthetic. 3. Interior: The interior design of the Peugeot 207 highlights a sporty style, with two color schemes available: light and dark. Chrome trim is inlaid on the air vents and gear shift, while aluminum pedals can greatly stimulate driving passion.

17

4

Share

How to Deal with Foggy Windshield in Summer?

Methods to handle foggy windshield in summer: 1. Open windows for air circulation. 2. Reduce fan speed and turn on the external air circulation, then adjust the airflow to direct it fully towards the windshield. 3. Mix a defogging solution with a ratio of about 1:10 of detergent to water, and apply it to the glass with a cloth. 4. Turn on the heater.

10

2

Share

How to Practice Foot Control to Maintain Steady Throttle?

Maintaining a steady throttle requires gentle pressing and gradual lifting, ensuring smooth and even operation. Below are relevant tips for throttle control: 1. Gentle Pressing and Gradual Lifting, Smooth and Even: When operating the throttle pedal, place the heel of your right foot on the floor of the driver's compartment as a pivot point. Gently press the accelerator pedal with the ball of your foot, using the ankle joint's flexion and extension to press or release. Apply force softly, achieving a gentle press and gradual lift. 2. Coordinated Movements: When starting the engine, avoid pressing the throttle pedal all the way down; it's better to keep it slightly above the idle throttle. During initial acceleration, apply throttle slightly before the clutch engagement point, with the throttle opening at a moderate level. Releasing the clutch should be closely coordinated with pressing the throttle, ensuring swift actions. When shifting gears, coordinate the use of neutral throttle, clutch engagement, and throttle pedal operation smoothly. 3. Rational Acceleration: When driving uphill, avoid pressing the throttle pedal fully. In low gears, it's generally advisable to press the throttle halfway. Even during uphill sprints, refrain from pressing the throttle pedal all the way down. If pressing the throttle pedal three-quarters of the way doesn't result in a corresponding increase in engine speed, downshift to a lower gear before pressing the throttle pedal for acceleration.

17

5

Share

How Long Should You Warm Up a Car That Hasn't Been Driven?

Start the engine and let it idle for about five minutes, mainly to allow the engine oil inside the car to function more effectively, as it takes time to lubricate after being stationary for a long time. In cities with distinct seasons, the warm-up time can be adjusted more precisely: during spring to autumn, let the car idle for about three minutes, while in winter, the warm-up time can be slightly longer, recommended between five to ten minutes. The reasons for warming up the car are as follows: 1. Lack of lubrication: After the car has been parked for an extended period, the engine oil flows back to the oil pan at the bottom of the engine. Therefore, when starting the engine after prolonged disuse (such as overnight), the upper part of the engine is in a state without oil and lacks lubrication. 2. Inability to effectively vaporize gasoline: Before the engine reaches its operating temperature (approximately between 90–110 degrees Celsius), the fuel supply system cannot effectively vaporize gasoline completely due to the low temperature. 3. Lubrication of transmission gears: The lubrication of transmission gears is something most people don't understand and often overlook. Similar to engine oil, transmission gear oil flows to the lower part of the transmission when the car is cold. Only when the car is moving does the rotation of the gears bring the gear oil from the bottom to lubricate the upper part.

9

0

Share

What Are the Common Methods for Automobile Fault Diagnosis?

Automobile fault diagnosis methods are as follows: 1. Visual and Inquiry Method: When diagnosing a car fault, the repair personnel should first make a preliminary judgment on the car model and usage period upon seeing the car. The model can be identified from its appearance; the usage period can be estimated by observing the exterior or flipping the cab to expose the engine. Experienced repair personnel can even immediately determine the car fault. 2. Experience Method: As the name suggests, the Experience Method relies on the basic skills and extensive experience of drivers and repair personnel to quickly and accurately diagnose car faults. 3. Observation Method: The Observation Method involves the car repairer carefully observing the fault phenomenon at the location indicated by the car user and then making a judgment on the fault. This is one of the most commonly used, basic, and effective fault diagnosis methods. 4. Auditory Method: Using hearing to diagnose car and engine faults is the most common and simple method. When the car is running, the engine operates under different conditions, producing a noisy but regular sound. When a fault occurs in a certain part, abnormal sounds will appear. Experienced individuals can immediately determine the car fault based on the abnormal sounds. 5. Test Method: Using the Test Method to diagnose car and engine faults is one of the common methods. It can be used to check the functions of the car and engine without or with minimal disassembly, achieving the purpose of fault diagnosis.

20

0

Share

What transmission does the Audi RS4 use?

Which car has a dragonfly logo?

Where is the air conditioning filter of Dongfeng Peugeot 207 located?

How to Deal with Foggy Windshield in Summer?

How to Practice Foot Control to Maintain Steady Throttle?

How Long Should You Warm Up a Car That Hasn't Been Driven?

What Are the Common Methods for Automobile Fault Diagnosis?

What is the function of the automatic transmission handle button?

Why Can't the Brake Pedal Be Pressed Down During One-Key Start?

How to Park an Automatic Transmission Car on a Slope

How to Downshift in Automatic Transmission Manual Mode?