What Transmission Does the 2019 Golf Use?

2 Answers
ElisaMarie
07/29/25 8:27am
2019 Golf uses three types of transmissions: a 5-speed manual transmission, a 6-speed automatic manual transmission, and a 7-speed dual-clutch transmission. Below is a related introduction to the 2019 Golf: 1. The Volkswagen Golf is a hatchback model launched by Volkswagen, and it is also one of Volkswagen's best-selling models. This car is also one of the best-selling models globally. After more than a decade of upgrades and iterations, it has gone through a total of seven generations. 2. In terms of power, the Golf is equipped with 1.6L, 1.2T, 1.4T, and 2.0T engines. The 1.6L naturally aspirated engine has a maximum power of 81kW and a maximum torque of 155 Nm. The 1.2T turbocharged engine has a maximum power of 85kW and a maximum torque of 200 Nm. The 1.4T turbocharged engine has a maximum power of 110kW and a maximum torque of 250 Nm. The 2.0T engine has a maximum power of 162kW and a maximum torque of 350 Nm.
Was this review help?
1
0
Share
DeNevaeh
08/11/25 5:58pm
The 2019 Golf is equipped with various transmissions depending on different configurations. The most mainstream automatic version uses a 7-speed dual-clutch DSG transmission, which is suitable for conventional engines like the 1.5-liter TSI. This DSG system operates with two independent clutches working alternately, delivering rapid gear shifts and a smooth, jerk-free driving experience. It offers fuel efficiency and ease of use in daily driving, with an average fuel consumption of around 7 liters per 100 km on highways. However, slight vibrations may occur under low torque loads, so regular transmission fluid changes are recommended to prevent potential issues. The manual version features a 6-speed design with clear and easy-to-operate gear shifts, and a low clutch point that suits city driving, providing more fun for drivers who prefer manual control. High-performance models like the GTI are equipped with a 6-speed DSG to accommodate stronger power demands. Overall, the Golf offers a diverse range of transmission options, and with the right driving and maintenance habits, it can go the extra mile.
Was this review help?
10
5
Share
Expand All
More Forum Discussions

How to Open the Hood of a Haval H6?

Haval H6 hood opening method: 1. After entering the car's interior, locate the main driver's compartment, which is on the left side of the driver's seat. 2. You will find a button, which is the hood release switch. 3. Press the switch to open the hood. Additional information: 1. Powertrain. It is equipped with a 1.5t-EVO engine, with an expanded maximum torque output range of 1400-3600 rpm, paired with a second-generation 7DCT transmission, achieving a comprehensive transmission efficiency of up to 95.6%. 2. Safety. The concept of "safety without hierarchy" is proposed, featuring a standard 71.61% high-strength steel body, hot-formed steel integrated door frames, and 6 airbags, with the hot-formed steel strength reaching up to 2000Mpa.
14
0
Share

What is the fuel consumption of the Volkswagen Tharu?

The Volkswagen Tharu has 16 models currently on sale. Among them, the 2022 330TSI 4WD Luxury Edition, 4WD Flagship Edition, and the 2021 330TSI 4WD Flagship Edition, 4WD Luxury Edition, and 4WD Luxury Edition PLUS—totaling 5 models—are equipped with a 150-horsepower engine, with an NEDC fuel consumption of 6.49L per 100km. The remaining 11 models on sale are equipped with a 186-horsepower engine, with an NEDC fuel consumption of 7.16L per 100km. The fuel tank capacity varies among different models of the Volkswagen Tharu. The distance that can be covered on a full tank of fuel is as follows: For models equipped with a 150-horsepower engine and an NEDC fuel consumption of 6.49L per 100km, the fuel tank capacity is 51L, allowing a distance of 51/6.49*100=786km on a full tank. For models equipped with a 186-horsepower engine and an NEDC fuel consumption of 7.16L per 100km, the fuel tank capacity is 56.5L, allowing a distance of 56.5/7.16*100=789km on a full tank. Vehicle fuel consumption is directly influenced by five major factors: driving habits, the vehicle itself, road conditions, wind resistance, and ambient temperature. Specific factors that can increase fuel consumption include: Driving habits: Aggressive driving behaviors such as sudden acceleration, frequent overtaking, and not easing off the throttle before stopping at a red light can increase fuel consumption. The vehicle itself: Vehicles with larger engine displacements generally consume more fuel than those with smaller displacements, as larger displacements typically produce more power and require more gasoline for combustion. Heavier vehicles also consume more fuel due to the greater driving torque needed. Road conditions: Driving on unpaved roads, muddy roads, soft surfaces, or mountainous terrain increases resistance and fuel consumption. Wind resistance: Driving against strong winds or on windy days increases vehicle resistance and fuel consumption. Low ambient temperatures: When the engine block is cold, gasoline injected during a cold start does not atomize easily, requiring more fuel for combustion, which increases consumption. Additionally, in cold weather, the engine control unit may operate at higher RPMs to warm up the engine, further increasing fuel consumption.
7
2
Share

What are the dimensions of a 17.5-meter flatbed truck?

Generally speaking, flatbed trucks of the same tonnage may not have identical cargo compartment dimensions, but they fall within a certain range. Typically, the width of the cargo compartment ranges from 2.3 to 2.4 meters, while the length usually varies between 8 to 10 meters, or even up to 12.5 meters. Introduction to flatbed trucks: A flatbed truck refers to a vehicle with a cargo platform that lacks guardrails, commonly seen in large vehicles. One type is the 17.5-meter flatbed truck, with dimensions as follows: the cargo platform length is 17.5 meters, and the width can be 2.6 meters, 2.8 meters, or 3 meters, often featuring a high-low platform design. Flatbed trucks are a common choice for road transportation due to their convenience in loading and unloading large, heavy cargo. Compared to other vehicle types of the same specifications, they can carry more goods, making them highly favored by transport companies. Classification of flatbed trucks: In the transportation vehicle category, flatbed trucks are generally divided into two types: standard flatbeds and high-low flatbeds. Standard flatbeds typically range from 4 to 13 meters in length, while vehicles longer than 13 meters are mostly high-low flatbeds.
14
4
Share

How to Remove the Rear Seat of a Corolla?

Reach into the junction between the seat base and the backrest to feel for a latch. Press it slightly inward and lift upward to remove one side. Repeat the same method on the other side to detach the seat cushion. Related instructions are as follows: 1. Generally, installing seat covers does not require removing the backrest. Simply recline the seat and remove the headrest for installation. If backrest removal is necessary, there are three fixing screws at the very bottom of the backrest, located near both sides and the center. Use tools to remove the locks, being careful not to loosen the seat belt screws. After removing the screws, pull the backrest upward with force as it is secured by three hooks. 2. When reinstalling the backrest, position it from top to bottom, securing both sides first before aligning the center. For the base, push it firmly inward, then manually check if it aligns with the clips. Once aligned, press down firmly to secure the seat cushion in place.
3
2
Share

How to Use a Fallen-off ETC?

ETC needs to be reinstalled and reactivated if it falls off. The installation process for the ETC device is as follows: Upon receiving the device, first check if the ETC card and the electronic tag (OBU) are damaged. Press the anti-tamper button on the back of the OBU. The red light will briefly turn on, and the OLED screen will display "Tag Invalid" and "Please Insert Card," indicating the device is functioning properly. Clean the front windshield to ensure the surface is smooth, clean, and dry. Then, peel off the adhesive backing of the OBU and attach it to the installation position. Press firmly for 2-3 minutes to remove any air bubbles. Insert the ETC card with the front side facing the driver and the back side facing the windshield. The chip should be inserted into the OBU device. Method to activate the ETC device: Insert and remove the ETC card twice until the electronic tag screen displays "Bluetooth On." If "Tag Invalid" appears when inserting and removing the card twice without attaching the electronic tag, it is normal and does not affect activation. Alternatively, you can press the button on the top of the electronic tag to enable Bluetooth. Turn on your phone’s Bluetooth and open the corresponding mobile app (usually a download QR code is provided on the electronic tag). Navigate to the device activation interface. Click on "Device Connection" and wait patiently for the "Connection Successful" prompt. Once connected, upload a photo of the vehicle’s front to complete the activation.
1
3
Share

Does the Santana have an anti-collision beam installed?

The Santana is only equipped with a front anti-collision beam, without a rear anti-collision beam. Santana is an automobile brand produced by Shanghai Volkswagen. Taking the Santana 2021 1.5L Automatic Comfort Edition as an example: its body dimensions are 4475mm in length, 1706mm in width, 1469mm in height, with a wheelbase of 2603mm. The Santana is powered by a 1.5L 112 horsepower L4 naturally aspirated multi-point fuel injection engine paired with a 6-speed automatic transmission, delivering a maximum power of 82 kW, a maximum torque of 145 N·m, with the maximum power achieved at 6100 rpm and the maximum torque at 4000 rpm.
17
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.