···
Log in / Register

What traffic violations can spherical cameras capture?

4 Answers
StPreston
07/25/25 12:04am
Spherical cameras primarily monitor illegal parking and public security, usually installed in densely populated areas and no-parking zones. Other common surveillance systems include the Sky Net monitoring system, traffic flow monitoring cameras, and electronic police. Below are detailed introductions: Sky Net monitoring system: The Sky Net monitoring system is mainly controlled by public security departments, with its primary functions being crime prevention and real-time monitoring of public security on road sections. Generally, this type of camera does not capture traffic violations. Additionally, the Sky Net monitoring system can automatically recognize vehicles, pedestrians' ages, clothing, and other information. Traffic flow monitoring cameras: The main function of these cameras is to monitor vehicle flow on roads; they do not capture traffic violations. These cameras are usually installed alongside electronic police, and they determine the duration of traffic light controls. Electronic police: Electronic police are used to capture images of traffic violations, including running red lights, driving in the wrong direction, speeding, crossing lines, and illegal parking.
Was this review help?
3
5
Share
McJaxon
08/10/25 10:45am
The spherical camera acts like an all-weather monitoring assistant, capable of capturing various types of traffic violations. First and foremost, the most typical violation is running a red light—when you fail to stop at a red light and proceed past the stop line, it automatically senses and captures the violation. Next is speeding, where the camera, combined with radar technology, measures vehicle speed and photographs offenders. Illegal parking is also recorded, such as temporary stops or prolonged stays in restricted zones, with license plates identified and logged. Lane violations, like crossing solid lines or erratic lane changes, are also detected. Additionally, some advanced spherical cameras can recognize driver behavior, such as using a phone while driving or not wearing a seatbelt, capturing high-definition images as evidence. These devices are often installed at busy intersections to help traffic police enforce laws efficiently. However, remember to regularly check for camera malfunctions to avoid incorrect penalties.
Was this review help?
9
4
Share
Expand All
DeEvangeline
09/26/25 7:30am
A friend of mine has been caught by traffic cameras several times for violations. Those dome-shaped cameras are incredibly sharp at capturing minor daily infractions. For instance, running a red light—if you accidentally fail to stop at an intersection, it snaps a photo instantly. Speeding is another common offense, especially on low-speed-limit urban roads. Parking violations are even more frequent; stopping for just a few minutes in a no-parking zone by the roadside can draw its attention. When you cross lanes or cut in line, the camera records your lane changes. As for using a phone while driving, some areas now have AI recognition that can identify you holding a phone and flag it. My advice is to pay extra attention to road signs while driving and steer clear of spots with dome cameras to stay safe.
Was this review help?
2
2
Share
Expand All
StEvan
11/10/25 2:45am
Spherical cameras are widely used in urban traffic monitoring, primarily targeting violations such as running red lights by detecting vehicles passing through intersections during red signals; speeding by measuring vehicles exceeding speed limits; illegal parking, such as occupying fire lanes; additionally, crossing lines or reckless lane changes are also captured. Some advanced spherical cameras even support detecting in-car violations like using phones while driving. These cameras are easy to install, highly efficient, and offer extensive coverage—drivers should stay cautious.
Was this review help?
18
2
Share
Expand All
More Forum Discussions

How many seconds does the Kawasaki H2 take to accelerate from 0 to 100 km/h?

The Kawasaki H2's 0-100 km/h acceleration time is approximately 2.8 seconds, with a top speed reaching 300 km/h. Acceleration performance is determined by torque: Torque, also known as rotational force, is the moment that causes an axis to rotate. The common unit for torque is kg-m (with Nm being the international unit). When driving torque remains constant, the force generated decreases as the distance from the rotation center increases. Kawasaki H2 engine: The Kawasaki H2 is powered by an inline four-cylinder liquid-cooled engine equipped with a supercharger. This engine has a displacement of 998cc, features four valves per cylinder, and delivers a maximum horsepower output of 200 hp.
17
3
Share

Is it safe to drive through accumulated water on rainy days?

Driving through accumulated water on rainy days is generally safe as long as the water depth does not exceed the air intake. To successfully navigate through waterlogged sections, the following points must be noted: 1. Do not recklessly drive through water: When a car is driving through water, the buoyancy of the water and the impact of the current reduce the adhesion of the wheels, making the vehicle less stable and prone to skidding or sliding. If the water is deep, electrical equipment is susceptible to short circuits, and the engine is at risk of water ingress. Therefore, it is essential to carefully assess the depth, flow rate, and condition of the road beneath the water before attempting to drive through. 2. Understand your vehicle's safe wading depth: The water depth must never exceed the height of the engine's air intake, and you should also consider whether the height of the waves could surpass the air intake position (for most small cars, the engine air intake is located on the side of the air filter, above the front bumper, or above the intake grille). Additionally, consider whether water could enter the cabin. If the water depth exceeds the lower edge of the door, water can seep in through poorly sealed areas. Once water enters the cabin, the floor materials, which are highly absorbent, will require removal for drying or baking to dry out completely. Moreover, the electrical components beneath the floor are also prone to damage.
6
1
Share

What is the CSM automotive module in General Motors vehicles?

General Motors' CSM automotive module is a bus measurement module and data logger. The brands under General Motors include: Buick, Chevrolet, Cadillac, GMC, Wuling, Baojun, and Holden, among others. Taking the 2021 Buick Excelle as an example, its body dimensions are: 4609mm in length, 1798mm in width, and 1464mm in height, with a wheelbase of 2640mm. The 2021 Buick Excelle is equipped with a 1.5L naturally aspirated engine, delivering a maximum horsepower of 113PS, a maximum power of 83kW, and a maximum torque of 141Nm, paired with a 6-speed automatic transmission.
13
2
Share

What is the fuel tank capacity of the old Lavida?

2016 old Lavida has only 1 model, with a fuel tank capacity of 55 liters. The vehicle is equipped with a 1.4T turbocharged engine, and all models use a 7-speed dry dual-clutch transmission (DCT). Among the same class of vehicles, the 2022 Civic has a fuel tank capacity of 47 liters, the 2021 Xingrui has a fuel tank capacity of 50 liters, and the 2021 Corolla has a fuel tank capacity of 50 liters. During the actual refueling process, the amount of fuel may exceed the marked capacity. This is because the fuel tank capacity marked by the car manufacturer is from the bottom of the tank to the safety limit, and there is still some space from the safety limit to the tank opening. This space is to ensure that the fuel in the tank can expand when the temperature rises without overflowing the tank's safety space. If the fuel is filled to the tank opening during refueling, the actual refueling amount will be larger than the marked fuel tank capacity. If the owner wants to know the remaining fuel in the tank, they can observe the fuel gauge on the right side of the dashboard, which is marked with E and F. When the pointer is close to E, it means the fuel is almost empty, and when it is close to F, it means the fuel is sufficient.
17
4
Share

How to Adjust the Insufficient Brightness of Tayron's Headlights?

Tayron's headlight brightness can be adjusted by following these steps: 1. Start the power and turn on the central control display; 2. Click on settings to enter the settings options; 3. Select the lighting settings to adjust. Taking the 2020 Tayron 2WD Comfort Smart Edition as an example, its body dimensions are: 4589mm in length, 1860mm in width, and 1660mm in height, with a wheelbase of 2731mm. The 2020 Tayron 2WD Comfort Smart Edition is equipped with a 1.4L turbocharged engine, delivering a maximum horsepower of 150PS, a maximum power of 110kW, and a maximum torque of 250Nm, paired with a 7-speed dual-clutch transmission.
2
5
Share

What is the background of XPeng Motors?

XPeng Motors is an emerging brand, founded in 2014 and headquartered in Guangzhou. It is an internet electric vehicle brand under Guangzhou Xiaopeng Motors Technology Co., Ltd. XPeng Motors system introduction: XPeng Motors' pure electric drive system is centered around the motor, battery, and electronic control. The initial version of XPeng Motors' motor achieves a power density of 10kw/L, which is more than double the domestic average level. XPeng Motors battery aspects: XPeng Motors' battery pack has undergone four iterations of development, with an energy density approaching 150Wh/kg. Unlike most domestic electric vehicle battery packs that use natural cooling or air cooling, XPeng Motors has designed a liquid-cooled battery pack. After exposure tests, it can output over 200kW while keeping the temperature rise within 10 degrees, effectively solving the issue of battery temperature rise. This pure electric drive system has undergone bench tests, dynamometer tests, and proving ground road tests, accumulating over 5,000 kilometers of testing mileage.
20
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.