What Toyota model is gtm7152ccm?

1 Answers
DiAllison
07/30/25 9:57am
The Toyota gtm7152cm model is the Yaris L equipped with a 1.5L naturally aspirated engine. Additional information: 1. Exterior: The new Yaris L maintains its original oversized body dimensions and bold front grille design. With the goal of "enhancing distinctive image and iconic appearance", it features China-market exclusive redesigned bumpers, headlight clusters with added daytime running lights, and modified taillight layouts with LED light sources that also reduce energy consumption. 2. Safety features: Building upon the existing ABS+BA (Anti-lock Braking System/Brake Assist), the new Yaris L adds VSC (Vehicle Stability Control) and TRC (Traction Control) systems. These systems constantly monitor all four wheels, selectively braking wheels slipping on wet/snowy surfaces while limiting engine output to ensure directional stability and prevent skidding or loss of control.
Was this review help?
7
0
Share
More Forum Discussions

How many days does it usually take to receive a text message for running a red light in Jiaojiang, Taizhou?

Running a red light usually results in receiving a text message within 10 days. Point deduction standards for running a red light: According to Article 2, Section 1, Clause 2 of the "Scoring Standards for Road Traffic Safety Violations," driving a motor vehicle in violation of traffic signal lights will result in a deduction of 6 points. Article 3, Section 1, Clause 8 states that driving a motor vehicle in violation of prohibition signs or markings will result in a deduction of 3 points. How to check for running a red light: You can check for red light violations through the "Traffic Management 12123" app. After opening the app, log in using your ID card, find the option for violation handling, and click on it. In the violation handling section, you can see the current status of your vehicle. If there are any violations, the specific details will be displayed. You can also check by visiting the service halls of the traffic police departments in various districts and counties, using the touch-screen query terminals. Alternatively, log in to the external service websites of the public security traffic management bureaus of various cities, locate the vehicle violation query section, enter your license plate number and engine number, and click to query.
12
2
Share

Does Adhesion Decrease in Tunnels?

Adhesion does decrease when driving in tunnels. Here are some relevant tips for tunnel driving: 1. Maintain a safe following distance: Keeping a safe distance and leaving enough space for evasive maneuvers ensures sufficient safety. Generally, a following distance of over 100 meters should be maintained in tunnels. For longer tunnels, follow the posted guidance to maintain an appropriate safe driving distance. 2. Avoid using high beams: Prolonged use of high beams at night can affect oncoming and preceding vehicles, as they can cause temporary blindness to drivers. The significant difference in light levels inside and outside tunnels already makes it difficult for drivers to adjust visually. Adding high beams to this situation increases the risk of accidents, so high beams should be avoided. 3. Reduce speed and turn on low beams before entering the tunnel: During daytime driving, entering a tunnel causes an instant drop in light levels, which can make it hard for the human eye to adjust quickly. Therefore, about 100 meters before entering the tunnel, you should reduce speed, increase following distance, and turn on your headlights to enter the tunnel safely at a relatively slower speed. Generally, speed should not exceed 60 km/h, but you can adjust based on the speed limit signs posted before the tunnel.
15
3
Share

Will the Engine Stall When Releasing the Clutch?

Releasing the clutch can cause the engine to stall. There are other situations that can also lead to stalling. The reasons for stalling when releasing the clutch are as follows: Reasons for Stalling: The clutch is the intermediary device that transmits the engine's power to the wheels. Therefore, if the clutch is released too quickly or the throttle is not engaged in time, the engine's output power becomes insufficient. The reaction force from the wheels then drives the engine, causing it to stall. If the clutch is lifted too quickly, the two gears will engage immediately. Since the car is stationary, a significant amount of thrust is required. If the engine's output power is not enough to instantly bring the car to the speed required for first gear, the car will jerk suddenly and then stall. The jerking motion indicates that the engine's power has been transmitted to the wheels, but the force required to overcome resistance is greater than what the engine can output. In other words, the engine cannot push the car forward, causing the gears to lock up and the engine to stall. Other Situations: Sudden braking, insufficient throttle during startup, starting on an uphill slope, or starting without releasing the handbrake can also cause stalling.
20
2
Share

Can Manual Transmission Cars Only Start in 1st Gear?

Manual transmission cars can also start in gears other than 1st. Here are the specific details about car starting: 1. For manual transmission vehicles, the choice of starting gear depends on factors such as the vehicle's power conditions, load situation, and environmental conditions. 2. If the vehicle is unloaded and on flat ground with minimal resistance, you can use an appropriate gear like 2nd or even 3rd gear to start, depending on the vehicle's power. 3. If the vehicle is fully loaded, on an uphill slope, or on uneven ground with significant resistance, 2nd or 3rd gear may not provide enough starting force, and 1st gear should be used instead.
4
2
Share

How Long After Tinting Can You Roll Down Windows?

After applying window tint film to your car, it is recommended to avoid rolling the windows up and down for 5-7 days to prevent damage to the tint film. This period allows the tint film to properly adhere to the window surface. Premature operation of the windows can cause the edges of the newly applied film to peel or the film to shift before it has fully bonded. Here are some post-application care tips: 1. Avoid washing the car for 3 days. 2. Do not use cloths containing chemical solvents to clean the tinted surface. 3. Avoid placing heavy objects on the tinted surface or attaching strong adhesives. 4. Protect the film from scratches by hard objects.
11
2
Share

What to Do When the Car Hood Won't Open Due to Dead Battery?

In case of a dead battery, you can use the key for mechanical unlocking. There is a crescent-shaped handle under the main driver's fuse box; pulling it will open the front hood. The introduction and functions of a car hood are as follows: Introduction: The car hood is made of rubber foam and aluminum foil materials. It reduces engine noise while isolating the heat generated during engine operation, effectively protecting the paint on the hood surface and preventing aging. Functions: Airflow guidance, protection of the engine and surrounding pipeline fittings, assistance in driving visibility, and accident prevention.
15
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.