···
Log in / Register

What Tools Are Included in the Bora's Trunk Spare Tire Kit?

4 Answers
DeGarrett
08/31/25 7:57am

Bora's trunk spare tire kit includes a car jack, tire lug nut hook, towing eyelet for rescue, and a socket wrench for wheel bolts. Car Spare Tire: A spare tire refers to the backup tire for a sedan, typically matching the specifications of the original car tires. However, some vehicles use spare tires with special-colored rims, compact spares, foldable spares, or run-flat tires to remind owners to inspect and replace faulty tires promptly. Regular Inspection of Spare Tire: During routine maintenance or before long trips, few car owners inspect their spare tires, and some unprofessional repair shops often overlook this. Spare tire inspection mainly involves checking tire pressure, wear, and cracks. Tires should be replaced before the tread wear reaches the wear indicator line. If there are fine cracks on the tire sidewall, the tire should not be used for long-distance or high-speed driving, as the thinner sidewall is prone to blowouts at high speeds.

Was this review help?
14
3
Share
DiKyle
09/13/25 4:13am

When you open the spare tire compartment of the Bora's trunk, the standard configuration includes a temporary spare tire, a folding jack, and a tire wrench. Sometimes there's also a towing hook tool or a screwdriver to assist in emergencies. The spare tire is a space-saver type, with a recommended pressure of around 60 psi, higher than normal tires, so it's important to regularly check for leaks to avoid being stranded when needed. Before changing a tire, find a safe, flat spot to park, engage the handbrake and shift to P to prevent rolling, then use the wrench to loosen the bolts and the jack to lift the car for tire replacement. I remember once on a long trip when I had a flat tire, these tools saved me in time, saving the cost of a tow truck. It's advisable to check the tools for rust or loss every quarter or during maintenance, and the spare tire shouldn't be stored for more than five years to avoid aging. Though these small items may seem insignificant, they ensure you reach the repair shop safely.

Was this review help?
17
5
Share
Expand All
ZoeyAnn
10/27/25 5:00am

Under the spare tire of the Bora's trunk, there is a set of small tools, basically consisting of a spare tire, a jack, and a tire wrench. The spare tire is a temporary one that can't be driven fast. The jack is foldable and doesn't take up much space but is quite stable when lifting the car. The wrench is specifically designed for removing bolts on the wheels and feels sturdy. I've been driving for over ten years and have changed tires a few times with these tools. It feels quite simple to operate, as long as you remember to find a safe place to park before changing the tire and not mess around on the roadside. Don't neglect checking the spare tire in daily life; I usually check the tire pressure when refueling, keeping it at 60 psi for optimal performance. Losing this wrench would be a big trouble, so don't move it around carelessly. The spare tire tools are simple but practical, allowing you to calmly handle emergencies at critical moments.

Was this review help?
12
5
Share
Expand All
JanelleDella
12/10/25 5:16am

The spare tire tools in the trunk of the Bora model mainly include a spare tire, jack, and tire wrench. The spare tire is a small-sized temporary tire for emergency use and cannot be driven at high speeds. The jack is foldable, and the wrench is used to loosen and tighten the tire bolts. Normally, these tools are stored in the spare tire well and should not be moved, but it's important to occasionally check if the tire pressure is around 60 psi. Why are these necessary? Because if you have a flat tire on the road, you can quickly change it yourself and get home safely. Remember to find a flat surface when changing the tire and engage the handbrake to prevent movement. Just keep the tools well-maintained to prevent rust.

Was this review help?
4
1
Share
Expand All
More Forum Discussions

Where is the oil filler port on a Wrangler?

The oil filler port on a Wrangler is located in the engine compartment. Open the engine hood and unscrew the oil cap counterclockwise to add oil. Functions of engine oil: 1. Lubrication and friction reduction: There is rapid relative sliding between the piston and cylinder, as well as between the main shaft and bearing shells. To prevent excessive wear on parts, an oil film needs to be established between the two sliding surfaces. A sufficiently thick oil film separates the surfaces of relatively sliding parts, thereby reducing wear. 2. Cooling: Engine oil carries heat back to the oil tank and dissipates it into the air, helping the radiator cool the engine. 3. Cleaning: Good quality engine oil can carry carbon deposits, sludge, and worn metal particles from engine parts back to the oil tank through circulation. The flow of lubricating oil washes away dirt generated on the working surfaces of parts. 4. Sealing and leak prevention: Engine oil can form a sealing ring between the piston rings and piston, reducing gas leakage and preventing external contaminants from entering.
3
4
Share

Is Engine Compartment Wiring Harness Maintenance Necessary?

Automobile engine wiring maintenance is necessary. Here are the relevant introductions: 1. Wiring harness aging: Common engine wiring harnesses are generally composed of multiple strands of copper wires, wrapped externally with plastic. During daily driving, the engine compartment temperature is very high. The plastic covering the wiring harness will release plasticizers and other chemicals when heated, which react with the internal copper wires, leading to reduced plastic strength, increased copper wire resistance, and ultimately causing the wiring harness to age and pose a short-circuit risk. Rubber hoses in the engine compartment belong to unsaturated polymer hydrocarbons, and aged rubber is also prone to oxidation, which can cause vehicle self-ignition. 2. Engine wiring oil contamination: Oil contamination on engine wiring significantly affects the engine's working quality and efficiency, leading to abnormal vibrations, increased noise, insufficient power, decreased fuel economy, and greatly shortened vehicle lifespan. Therefore, for older vehicles' engines and wiring, regular maintenance is even more essential to extend their service life as much as possible.
9
1
Share

What are the ignition methods of automobile engines?

Automobile engine ignition methods can be divided into compression ignition and spark ignition. Here are the detailed descriptions: 1. Compression ignition: This is an ignition method corresponding to diesel engines. Diesel engines use diesel as fuel. Compared with gasoline, diesel has a lower auto-ignition temperature, higher viscosity, and is less prone to evaporation. Moreover, diesel engines themselves do not have spark plugs, and their compression ratio is higher than that of gasoline engines. Therefore, diesel engines rely on the compression stroke to compress the mixture to the ignition point, causing it to ignite automatically, hence this ignition method is called compression ignition. 2. Spark ignition: This is an ignition method corresponding to gasoline engines. The auto-ignition temperature of gasoline is higher than that of diesel, and it has lower viscosity and is easier to evaporate. Therefore, it can form a uniform mixture with air outside the cylinder, or the injection system can directly inject gasoline into the cylinder. Then, near the end of the compression stroke, the mixture is ignited by the spark plug, hence this ignition method is called spark ignition.
14
0
Share

Is BMW Also Part of Volkswagen?

BMW is not part of Volkswagen. BMW is an independent group in the luxury car segment. BMW's vehicle series include i, x, z, 1, 2, 3, 4, 5, 6, 7, and 8. Taking the BMW 320i as an example, it is a mid-size 4-door 5-seater sedan with body dimensions of: length 4719mm, width 1827mm, height 1459mm, and a wheelbase of 2851mm. The BMW 320i is equipped with a 2.0T turbocharged engine and an 8-speed automatic transmission, delivering a maximum power of 115 kW and a maximum torque of 250 Nm. It features rear-wheel drive with a front suspension using a double-joint spring strut front axle and a rear suspension employing a multi-link independent suspension.
5
5
Share

How to turn on the rear air conditioning in a Lexus ES?

There is no air conditioning switch in the rear of the Lexus ES, only air vents. To open them, simply roll the middle wheel upwards. Below are the benefits of rear air conditioning: 1. Comfort: Provides a more comfortable riding space. In summer, there is often an experience where front passengers feel uncomfortably cold while rear passengers are still sweating profusely. The main reason is the lack of rear air conditioning. The front air conditioning can only lower the temperature in the front, and it takes time for the rear temperature to drop, leading to a stark temperature difference between the front and rear. The presence of independent rear air conditioning allows both front and rear temperatures to drop simultaneously, creating a better driving and riding environment. 2. Premium Feel: Enhances the car's grade. The inclusion of independent rear air conditioning elevates the car's interior to a higher level, as it is typically found only in high-end vehicles. Having rear independent air conditioning can instantly upgrade the car's interior.
19
5
Share

What Causes Vibration in Diesel Vehicles at Idle Speed?

The causes of vibration in diesel vehicles at idle speed are: 1. Sticking or poor atomization of the fuel injector nozzles in the cylinders; 2. Uneven fuel supply from the injection pump at idle speed, leading to uneven operation of the cylinders; 3. Improper idle speed adjustment; 4. Loose screws or abnormal wear; 5. Poor valve sealing; 6. High engine temperature or insufficient engine oil; 7. Severe carbon buildup in the engine. The methods to address idle vibration in diesel vehicles are: 1. Adjust the idle fuel supply screw; 2. Adjust the valve clearance; 3. Replace the engine oil; 4. Clean carbon deposits. The maintenance methods for diesel vehicles include: 1. Ensure proper installation of the air filter, avoiding omissions, reverse installation, or incorrect installation, and maintain tightness at all connections; 2. Regularly maintain the lubricating oil filter; 3. Periodically clean the fuel tank and fuel lines; 4. Avoid pressing the accelerator pedal when starting the diesel vehicle and do not accelerate too quickly.
17
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.