···
Log in / Register

What to Use to Wipe Car Windows to Prevent Fogging?

4 Answers
ChloeAnn
09/02/25 8:13am

Car windows wiped with dishwashing liquid or soapy water are less likely to fog up because soapy water and dishwashing liquid contain surfactants that effectively prevent water vapor from condensing on the glass surface, thus serving an anti-fogging purpose. Mix dishwashing liquid and water in a ratio of approximately 1:10, then use a soft cloth to apply the prepared solution to the inner side of the front and rear windows. Alternatively, rubbing soap on a damp cloth and then wiping the glass can also prevent fogging. When dishwashing liquid or soap molecules enter the water, their polar hydrophilic parts disrupt the attraction between water molecules, reducing the surface tension of the water. This allows water molecules to spread evenly on the treated glass surface, forming a water film that adheres to the glass. The more rainwater hits the glass, the larger the water film becomes, maintaining the glass at an extremely high level of clarity.

Was this review help?
8
0
Share
StJayce
09/15/25 3:21am

I use a homemade solution of dish soap and water to clean car windows, with a ratio of one part dish soap to ten parts water. Spray it on a soft cloth and evenly apply it to both the inside and outside of the glass. Once dry, it forms a protective layer that prevents fogging. Clean once a week. In summer, avoid setting the air conditioning too cold to reduce temperature differences, and in winter, slightly open the windows for ventilation to reduce humidity more effectively. When parking, leave the windows slightly open to minimize moisture buildup inside—it's both cost-effective and safe. I learned this trick from a neighbor and also used it when my son was learning to drive, and the visibility improved significantly.

Was this review help?
8
4
Share
Expand All
SanEvelyn
10/29/25 4:01am

As a car enthusiast, I recommend specialized anti-fog sprays like Rain-X - apply and buff with a dry cloth for long-lasting effect. Before driving, use warm air to blow the windshield or activate the defrost function to preheat, maintaining stable cabin temperature. Regular cleaning is essential, avoid oil-based cleaners which worsen fogging. Car club experience suggests cracking windows slightly to reduce temperature difference, check sealing strips to prevent drafts, ensuring clear visibility for every trip and safer night driving.

Was this review help?
15
4
Share
Expand All
CalebDella
12/12/25 4:13am

I often encounter fogging issues while driving, especially on rainy days, which is quite annoying. Buying anti-fog wipes from the supermarket to wipe the windows can last for a few days. Turning off the internal circulation and letting the air conditioner absorb moisture is effective. In winter, I first turn on the warm air to blow the windows before setting off and gently wipe them with a clean cloth to reduce irritation. Through trial and error during my novice period, I found these methods, and now my vision is always clear, which makes me feel much better.

Was this review help?
7
0
Share
Expand All
More Forum Discussions

What does the 'L' in Audi A6L stand for?

The 'L' in Audi A6L refers to the long-wheelbase version of the vehicle, with the wheelbase extended by 10cm. This 'L' is placed on the right side of the model name. The extended wheelbase increases the driving space, thereby enhancing comfort. The Audi A6L is equipped with a 2.0TFSI engine, paired with a 7-speed dual-clutch transmission, and features such as a leather multifunction steering wheel, BOSE sound system, four-zone automatic climate control, and a 360-degree panoramic imaging system. The dimensions of the Audi A6L are 5038mm in length, 1886mm in width, and 1475mm in height, with a wheelbase of 3024mm. The engine in this model delivers a maximum power of 140kw and a maximum torque of 320nm.
4
0
Share

How many ETCs can one person apply for?

Each vehicle can only have one ETC. According to the "Implementation Plan for Accelerating the Application of Electronic Toll Collection (ETC) on Highways" issued by the Ministry of Transport, ETC registration is tied to the vehicle's license. If you own multiple vehicles, you can use different vehicle licenses to apply for ETCs. Documents required for ETC application: The original valid ID card of the vehicle owner, the original and a copy of the vehicle license (the page with the most recent annual inspection stamp). If applying on behalf of someone else, the original valid ID card of the proxy is also required. If applying through major bank branches, you will need a debit or credit card from the respective bank. Some banks only support ETC binding with credit cards, while others may require freezing a certain amount as a deposit when binding with a debit card. The current year's vehicle insurance policy is also needed. For corporate applications, the agent's ID (or driver's license), the company's organization code certificate (or business license), and the official seal are required. ETC deduction principles: Highways have one or more ETC lanes. Using dedicated short-range microwave communication between the vehicle's on-board electronic tag (installed on the windshield) and the microwave antenna in the ETC lane, the system settles payments with the bank via computer networking technology, allowing vehicles to pass toll stations without stopping. This operates on a "pass first, deduct later" principle. Benefits of installing ETC: Time-saving: Eliminates the hassle of waiting in queues. Green and eco-friendly: Reduces noise and exhaust emissions by eliminating stops at toll stations. Cost-saving: Reduces vehicle wear and fuel consumption by minimizing frequent starts and stops. Efficiency: ETC lanes can theoretically process vehicles 2-3 times faster, making traditional ETC more advanced and high-tech. Compared to license plate payment, ETC technology is more mature and advantageous. More policy support: The State Council's "13th Five-Year Plan for the Development of a Modern Comprehensive Transportation System" explicitly aims for "interoperability of transportation cards in key city clusters by 2020 and a significant increase in ETC installation rates," with a target of "50% ETC usage rate for road passenger vehicles by 2020." Future possibilities: Beyond improving ETC installation convenience and passenger vehicle usage rates, future plans include promoting ETC for trucks and exploring deeper integration with smart transportation initiatives like vehicle-to-vehicle communication and vehicle-road coordination, offering comprehensive travel services. This means more scenarios will support ETC applications. ETC usage precautions: The ETC transaction sensing range is 8 meters. If the vehicle ahead is stationary, maintain a distance of over 10 meters to avoid accidental payment for the other vehicle due to faulty or absent ETC devices. The ETC lane recognition speed is 20 km/h. Driving too fast may result in failed readings and deductions. Unauthorized removal or movement of the OBU device, or a loose/detached ETC tag, will deactivate the tag. It can be tested at the bank where the ETC card was issued or at highway service centers. Non-deliberate loosening or detachment only requires reactivation. Insufficient balance on a debit card linked to ETC may cause deduction failure. Follow on-site staff guidance to use manual MTC lanes with cash or card payments. Thick windshields may cause poor signal reception, especially for vehicles with replaced or modified windshields after accidents.
8
3
Share

Should Car Windshields Be Tinted?

Car windshields should be tinted. The benefits of tinting include: 1. Heat insulation, especially in summer, which can reduce the rise in interior temperature and lessen the load on the air conditioning; 2. Privacy, as tinting allows one-way visibility, making it difficult to see inside the car from the outside, which can deter thieves by obscuring their view; 3. Preventing glass shattering, as in the event of an accident, the film helps secure broken glass fragments, holding the glass in place to prevent accidental injuries. The primary function of car film is to prevent shattered glass from flying and causing harm. Car glass is categorized by location into: front windshield, side windows, rear windshield, and sunroof glass. Generally, tinting is applied to the front windshield and side windows.
12
3
Share

How to adjust the seats of Audi Q2L?

Audi Q2L seat adjustment methods: 1. To adjust the backrest vertically or horizontally, push button 1 forward or backward; 2. To adjust the seat forward or backward, push button 2 forward or backward. To adjust the seat up or down, push button 2 up or down; 3. To adjust the lumbar support, press button 3 in the corresponding position. The Audi Q2L has a body length, width, and height of 4236mm, 1785mm, and 1548mm respectively, with a wheelbase of 2628mm. The car is front-wheel drive and is equipped with an engine that delivers a maximum power of 110kW and a maximum torque of 250Nm.
18
5
Share

What does the exclamation mark on the dashboard indicate?

The reasons for an exclamation mark appearing on the dashboard: 1. A triangle with an exclamation mark inside indicates a general fault warning light, which may illuminate due to reasons such as overheating of the dry dual-clutch transmission clutch, intervention or malfunction of the fuel cut-off system, engine oil pressure sensor failure, or traction control system warning or malfunction; 2. A horizontal line under a bracket with an exclamation mark in the middle represents the tire pressure monitoring warning light, which illuminates when the air pressure in one of the vehicle's tires is too low; 3. A circle with an exclamation mark inside indicates the brake system warning light, which may illuminate due to reasons such as low brake fluid level, illumination during driving, or malfunction of the brake system.
10
4
Share

Will running a red light with temporary license plates result in penalty points?

Yes, penalty points will be deducted. According to Article 90 of the Road Traffic Safety Law, drivers who violate traffic signals will be fined 200 yuan and receive 6 penalty points. Temporary license plates are paper motor vehicle plate numbers that allow temporary road use. Traffic violation penalties are not related to temporary or permanent license plates but are imposed based on the driver's illegal behavior. To determine a red light violation, at least three pieces of photographic evidence are required: the vehicle has not left the stop line when the red light is on; the vehicle passes through the intersection when the red light is on; the vehicle has crossed the line and continues to move forward when the red light is on. Article 26 of the Road Traffic Safety Law: Traffic signals consist of red, green, and yellow lights. A red light indicates prohibition of passage, a green light indicates permission to pass, and a yellow light serves as a warning. Article 44: Motor vehicles passing through intersections shall proceed according to traffic signals, traffic signs, traffic markings, or the command of traffic police. Six scenarios of running a red light: Stopping immediately after crossing the line at a red light (when the red light is on, the vehicle fails to stop in time, and the front of the vehicle crosses the stop line): If the vehicle has just crossed the stop line when the red light is on but stops immediately, this will not be penalized as running a red light. However, if there is significant movement after crossing the line, it will be penalized. Electronic monitoring captures three photos for red light violations: the front wheels crossing the stop line, the rear wheels crossing the stop line, and the front wheels crossing the opposite stop line. Only when all three photos are present will it be considered running a red light, resulting in 6 penalty points under the new regulations. Running a red light under the direction of traffic police (the signal is red, but the traffic police on duty signal permission to pass): When there is a conflict between the traffic signal and the traffic police's gesture, motor vehicle drivers must obey the on-site command of the traffic police. If a red light violation occurs due to the traffic police's on-site command, the driver can obtain a diversion certificate from the local traffic police station to avoid penalties. If the party disagrees with the penalty, they can appeal through administrative reconsideration or administrative litigation. Stopping with the entire vehicle body over the line at a red light (failing to brake in time, resulting in the entire vehicle body crossing the stop line): If the entire vehicle crosses the stop line but does not continue to move, this is not considered running a red light but is classified as over-the-line parking. Reversing after over-the-line parking (attempting to avoid penalties by reversing after over-the-line parking at a red light): Motor vehicles are not allowed to reverse at railway crossings, intersections, one-way roads, bridges, sharp curves, steep slopes, or tunnels. Violations may result in a warning or fine. Accidentally running a red light behind a large vehicle (due to the large vehicle blocking the view, following it through the intersection): Drivers must maintain sufficient visibility to see the traffic signals ahead and ensure a safe braking distance. Generally, if a motor vehicle is photographed behind a large vehicle, it is due to rushing through the intersection. This behavior will be penalized as running a red light.
19
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.