···
Log in / Register

What to Pay Attention to When Taking Delivery of a New Car?

4 Answers
Beatrix
07/29/25 9:27pm
Key points to consider when taking delivery of a new car: 1. Check the mileage: Reviewing the mileage can help initially determine if the car is indeed new, as a new car's mileage should theoretically be close to zero. 2. Examine the accompanying documents: The documents can reveal the car's manufacturing date. Additionally, cross-check the VIN (Vehicle Identification Number) and engine number with the actual vehicle to avoid discrepancies. Also, ensure the completeness of the documents, with special attention to the purchase invoice, warranty certificate, user manual, and maintenance manual. 3. Look for signs of prior use: Inspect both the interior and exterior of the car for any signs of use, such as scratches on the paint, usage traces on the infotainment system, or previous Bluetooth connections to phones. 4. Check the vehicle identification plate: The vehicle identification plate contains information like the manufacturing date and vehicle number. It is usually located below the B-pillar on the passenger side. Verify that the numbers match those in the manual. 5. Inspect the glass date: Checking the glass is an effective way to confirm if the car is new, as the glass is installed when the car is manufactured. If the car has been in a major accident, the glass would likely have been replaced. 6. Examine tire wear and manufacturing date: Since a new car hasn't been driven, the tires should show no signs of wear. The tire wear can indicate the car's mileage. Additionally, tires have their own manufacturing date, which should be earlier than the car's production date.
Was this review help?
5
0
Share
DeRuth
08/15/25 8:16pm
As an experienced driver who has purchased several cars, the most important thing during the inspection is paying attention to the details. Drive the new car into a well-lit area, walk around the body a few times to carefully check for any scratches or uneven paint, especially around the edges of the hood and door seams. Then, sit in the driver's seat to inspect the interior, feel the leather seat seams to ensure they are tight, start the vehicle to listen for any unusual engine noises, and test functions like the air conditioning, audio system, and lights to make sure they work properly. Don’t forget to check the vehicle configuration list to confirm all optional accessories are included. Regarding documents, you must obtain the purchase invoice, vehicle certification, and conformity certificate—these three are essential. It’s best to have the salesperson teach you how to use the central control screen and smart driving assistance features on the spot, so you can drive home with peace of mind. Also, inventory the onboard tools, making sure not to overlook the triangular warning sign and jack in the trunk.
Was this review help?
17
5
Share
Expand All
AustinFitz
10/17/25 3:49am
I just picked up my new car last month and believe it's crucial to focus on key procedures. First, verify the vehicle's identity by ensuring the VIN on the windshield matches the registration certificate, and check that the production date is within six months to avoid a stock vehicle. Second, inspect the exterior—use a flashlight to check if the tire hairs are intact, and test the door hinges for smooth operation. Third, examine the interior functions, paying special attention to power windows and the sunroof for any sticking, and report any scratches found during seat adjustment. Double-check all documents to confirm the invoice amount matches the contract, as the vehicle qualification certificate directly affects registration. Finally, have the salesperson take you to refuel, testing the steering wheel responsiveness and brake sensitivity along the way. Don't rush to sign at delivery—resolve any issues before taking the keys. Remember to check the odometer reading; anything under 30 kilometers is considered normal.
Was this review help?
13
4
Share
Expand All
ChaseDella
11/30/25 4:32am
It was pouring rain on the day I picked up my car, so here are some simple and practical tips. First, visually scan the entire body for any dents, especially on bumpers and other impact-prone areas. Then check all lights: headlights, fog lights, brake lights, and reverse lights. After starting the engine, turn on the AC to confirm it cools down quickly. Test the electric seat adjustments multiple times to ensure smooth operation. Pay special attention to the vehicle documents - make sure the purchase invoice is stamped, as missing the three-guarantee certificate means no warranty. Check if the spare tire in the trunk is in good condition, and ideally test the air pump on the spot. Unpack and inspect all gifts from the dealer like floor mats and dash cams immediately. Don't obsess over engine specs - new cars rarely have major issues. The key is to allocate at least two hours for thorough inspection.
Was this review help?
7
1
Share
Expand All
More Forum Discussions

How many models does the Yamaha YBR150 have?

There are two models of the Yamaha YBR150, one with disc brakes and one with drum brakes. Here is some information about the Yamaha YBR150: Appearance: The overall appearance may not be the most stylish, but the sharp lines and unique color schemes are not unattractive, making it an enduring design. Both front and rear lights, as well as turn signals, use conventional bulbs, but the brightness is sufficient. The taillight also features a popular split design. Configuration: The dashboard uses a traditional mechanical style and includes a gear indicator. The front brake is a single-piston disc brake, while the rear brake is a traditional drum brake. The internal wiring and craftsmanship are also meticulous, maintaining Yamaha's consistent production standards.
6
4
Share

What is the fuel consumption of Yamaha Xunying?

Xunying's actual fuel consumption per 100 kilometers is not less than 3 liters. If the average comprehensive fuel consumption is 3.65 liters per 100 kilometers, it is considered basically normal or slightly higher. Here is some introduction about Xunying: Appearance: The front lighting layout is divided into two parts, with the upper part being the turn signals and the lower part being the high/low beam lights and position lights. The clear and easy-to-read analog instrument panel is nothing special among scooters produced and sold in recent years. Braking: The single-piston brake caliper provides excellent actual braking force. The front storage compartment is reasonably designed, allowing for easy placement of small items. The scooter comes with an anti-theft keyhole, which is a common configuration for current scooters.
6
1
Share

How to Align the Reference Points for Parallel Parking in Driving Test Part 3?

Here are the step-by-step methods for aligning reference points during parallel parking in Driving Test Part 3: 1. Observe the front one-third of the car hood: Divide the hood into three equal sections. When the right one-third point aligns with the curb line during parking, the right wheels will be precisely 30cm from the curb. 2. Use the hood reinforcement rib as reference: Keep the right reinforcement rib aligned with the curb while moving forward to maintain the 30cm distance. 3. Utilize the windshield wiper notch: When the wiper's notch coincides with the curb line during forward motion, the vehicle maintains exactly 30cm from the curb. Detailed techniques for gear shifting in Driving Test Part 3: 1. Listen: When gear and speed mismatch occurs, obvious vehicle vibration and engine "knocking" sounds indicate shifting is required. 2. Watch: For students with poor vehicle sensitivity who can't perceive vibration intensity or determine shifting timing by sound, observe dashboard gauges for assistance. 3. Three Don'ts: Never look down at the gearshift, avoid skip-shifting, and prevent steering deviation.
11
5
Share

What does AEB mean?

AEB stands for Autonomous-Emergency-Braking, which is translated as automatic braking system in Chinese. It is an active safety technology for vehicles that can automatically monitor the distance and relative speed of objects ahead. When the driver brakes too late, with insufficient braking force, or fails to brake, the vehicle will issue a warning or apply the brakes automatically. Here is additional information: 1. Main functions of AEB: It includes three major parts: Pre-Collision Warning (PCW), Emergency Braking (EB), and Pedestrian Protection (PP). 2. Monitoring via radar and camera: The system uses radar and cameras to monitor the situation of vehicles and pedestrians ahead. If a potential collision risk is detected, the system will take corresponding warning and braking measures to avoid a collision or reduce the severity of the collision.
16
4
Share

What Color of Car Engine Oil Indicates It Needs to Be Changed?

Typically, the viscosity of the engine oil is used to determine whether it needs to be changed, rather than observing the color of the oil. Methods to determine if engine oil needs to be changed: Take a drop of oil and place it on a test paper. Observe the spread of the oil. If the edges of the spread are not clear, it means the oil can still be used. If a ring appears, it indicates the oil is still acceptable. If the ring is very distinct and the spread is minimal, it means the oil needs to be changed. Grade 1: There is no clear boundary between the deposit zone and the diffusion zone of the oil spot. The entire oil spot is uniform in color, and the oil ring is light and bright, indicating good oil quality. Grade 2: The deposit ring is dark in color, the diffusion ring is wide, and there is a clear boundary. The oil ring is yellow in varying shades, indicating the oil is contaminated but still usable. Grade 3: The deposit ring is dark black, deposits are dense, the diffusion ring is narrow, and the oil ring has darkened, indicating the oil has deteriorated. Grade 4: Only the central deposit ring and oil ring are present, with no diffusion ring. The deposit ring is pitch black, with dense and thick deposits that are difficult to dry. The oil ring is dark yellow or light brown, indicating the oil has oxidized and degraded. Method for changing engine oil: When adding engine oil, ensure the oil level is between the min and max marks on the dipstick. The oil level should not be below the min mark or above the max mark. If the oil level is below the min mark, it can lead to insufficient lubrication in the engine, increasing wear and tear. If the oil level is above the max mark, it can increase resistance during engine operation, leading to reduced power and increased fuel consumption. Always check the oil level carefully when adding oil.
9
2
Share

What causes the Yamaha Xunying 125 to lack acceleration?

Reasons for the Yamaha Xunying 125 lacking acceleration: fuel system malfunction, decreased engine compression ratio. Detailed explanations of the causes are as follows: Fuel system malfunction: Excessive fuel leads to an overly rich air-fuel mixture, causing the motorcycle to lack acceleration at low speeds. An overly rich mixture lacks sufficient oxygen during combustion, resulting in incomplete combustion. This reduces power output, worsens fuel efficiency, and easily leads to excessive carbon buildup, which can block the exhaust system and exacerbate the lack of acceleration. Decreased engine compression ratio: Engine power is directly linked to the compression ratio. With prolonged use, internal engine components wear out. If key components become excessively worn, the engine's compression ratio will decrease.
2
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.