···
Log in / Register

What to Pay Attention to When Practicing Driving in the Rain

4 Answers
VonLucy
07/29/25 10:39pm

When practicing driving in the rain, pay attention to the following: 1. Prepare tissues or handkerchiefs and wipe all the rearview mirrors before getting in the car. If using tissues, remember not to litter after wiping the mirrors; put them in your pocket and dispose of them in a trash bin later. 2. Choose shoes with textured soles when practicing driving in the rain. Shake off any water on the soles before getting in the car, and rub the soles against the floorboard a few times before placing your feet on the clutch and brake pedals to avoid slipping. Dry your hands before placing them on the steering wheel to prevent slipping. 3. The button for the windshield wiper is located on the lower right side of the steering wheel, opposite the turn signal button. Learn to use the windshield wiper when driving in the rain. 4. Try not to close the windows during a rainy test. Rain already reduces visibility, so keeping the windows open allows for better viewing of the rearview mirrors and reference points. 5. Wheels are prone to skidding on rainy days, so avoid driving too fast. When braking, use light or intermittent braking to reduce speed before applying full brakes, and avoid slamming on the brakes. 6. Adjust your mindset and practice driving in the rain regularly. Only by practicing in the rain during normal times will you feel confident and worry-free when encountering rain during the test, ensuring you can complete the exam with confidence.

Was this review help?
8
3
Share
LaKevin
08/15/25 11:51pm

Practicing driving in the rain requires extra caution. I’ve experienced several rainy road conditions, and the main issues are visibility and safe distance. Wet roads increase braking distance, so I usually reduce my speed to about half of normal and avoid sudden braking to prevent skidding. It’s also important to turn on headlights or fog lights so others can see you clearly and improve your own visibility. Windshields tend to fog up, so I activate the defogging function in advance to maintain clear vision. When practicing, choose open areas like empty parking lots or new development zones to minimize interference from surrounding vehicles. Also, watch out for pedestrians suddenly crossing with umbrellas. Stay calm—don’t jerk the steering wheel in panic—and practice slow turns repeatedly to get used to them. Safety always comes first; don’t rush into advanced techniques before mastering the basics.

Was this review help?
19
1
Share
Expand All
MacLogan
10/18/25 4:14am

When practicing driving in rainy weather, the condition of the car is crucial. I pay the most attention to the windshield wipers and tires. If the wiper rubber strips are aged, they may not clean water stains effectively, affecting visibility, so I check them in advance and replace them if necessary. Tires with shallow treads are prone to slipping on wet roads, so ensuring sufficient tread depth is essential for good grip. The lights must also function properly; turning on the parking lights or daytime running lights increases visibility. If the windows fog up, adjust the airflow to defog and maintain proper ventilation by switching between internal and external air circulation. During practice, it's advisable to familiarize yourself with the operation of these devices first, so you won't be flustered during actual driving. Regularly checking the vehicle reduces the risk of malfunctions, making practice safer and more efficient.

Was this review help?
14
4
Share
Expand All
RachelAnn
12/01/25 4:53am

When I was learning to drive, rainy days made me a bit nervous. Start with the basics: slow down your speed, avoid sudden acceleration or braking. Hold the steering wheel more firmly, don’t turn too sharply, and keep an eye on the rearview and side mirrors. Find an open space to practice braking distance—stopping on wet roads takes longer, so maintain a greater following distance than usual for safety. Adjust your lights and wipers beforehand, and stay focused without distractions. The key is to practice more to get the feel, and don’t be afraid to go slow.

Was this review help?
7
0
Share
Expand All
More Forum Discussions

Which Volvo Technologies Are Used in the Lynk & Co 06?

The Lynk & Co 06 is equipped with a 1.5T three-cylinder engine that incorporates Volvo technology. Its overall performance is not inferior to some 1.8T engines, delivering a maximum power of 130kW (177PS) and a maximum torque of 265N·m. The transmission is a 7DCT gearbox. Here are other details about the Lynk & Co 06: 1. Exterior Design: Unlike conventional floating roof designs, it features sharp angular lines, giving it a more dynamic and powerful appearance. The Lynk & Co 06 also offers a two-tone body color option. 2. Interior Design: The cabin combines light and dark-colored panels and adopts a dual-screen layout for the instrument cluster and infotainment system. 3. Features: It comes with a parking camera, ACC adaptive cruise control, a panoramic sunroof, and more.
7
4
Share

What is the SET button in a car?

The SET button in a car is a speed adjustment switch, which serves as the speed regulation indicator for cruise control. When setting the cruise control, the vehicle needs to be accelerated to the desired speed, and then the SET button is pressed to adjust. To use cruise control, first press the ON button to activate the cruise control function. When setting the cruise control speed, press the SET button to configure it. Cruise control has speed limitations, typically requiring the vehicle to be traveling at least 48 km/h. If the brake pedal is pressed during driving, the cruise control will deactivate. To resume cruise control, press the RSM button in the car. To increase the cruise control speed, press the ACCEL button. To decrease the cruise control speed, press the CST button. The cruise control function in a car works by using a speed sensor to transmit signals and compare them with the set speed, ensuring the vehicle maintains the preset speed. The car's computer can then provide the most accurate fuel supply. Using cruise control allows for more complete fuel combustion in the engine, while also reducing fuel consumption.
16
2
Share

Solutions for Corolla Remote Key Failure?

Hold down the unlock button on the remote key, insert the key into the ignition hole, quickly turn the key to the car self-check position, immediately turn the key back to the lock position, and quickly repeat this process three times. Here is the relevant introduction to the Toyota Corolla: 1. Comprehensive safety features. The Toyota Corolla U.S. version comes standard with front and side airbags, and is equipped with the Toyota Safety Sense driver assistance suite, including standard features like lane departure alert, rearview camera, pre-collision system with pedestrian detection, automatic high beams, and dynamic radar cruise control. 2. Stable quality with low maintenance costs. Although the Toyota Corolla is not a luxury car, it has very stable quality and very affordable after-sales maintenance. 3. Spacious rear seat space. The Toyota Corolla focuses on space, with not only the domestic version offering large interior space, but the overseas version also providing ample room, with rear seat space up to 40 inches.
7
2
Share

What does the pressure gauge pointer indicate for normal pressure in a fire extinguisher

The pressure gauge pointer of a fire extinguisher indicates normal pressure when it is in the green zone. The normal pressure value of a fire extinguisher is approximately between 1.2—1.5 MPa. If the pointer is in the red zone, it means the pressure inside the cylinder is insufficient, indicating the fire extinguisher cannot be used normally. If the pointer is in the yellow zone, it indicates overpressure, meaning the pressure is too high and poses a potential danger (however, slight overpressure may still be considered normal). Relevant information about fire extinguishers is as follows: 1. Introduction: A fire extinguisher, also known as a fire cylinder, is a portable firefighting tool. It contains chemicals used to extinguish fires. The fire extinguisher is a sturdy metal cylinder filled with water or fire-extinguishing materials. 2. Working Principle: When the lever at the top of the cylinder is pressed, the high pressure generated forces the extinguishing agent inside the cylinder out, similar to how a spray can ejects its contents. The function of a fire extinguisher is to displace air, depriving the fire of oxygen and thus extinguishing it.
2
1
Share

What is the difference between a DSG transmission and an AT transmission?

The differences between a DSG transmission and an AT transmission are as follows: 1. AT: The torque converter is the most distinctive component of an AT transmission, consisting of components such as the pump wheel, turbine, and guide wheel, which directly input engine power to transmit torque and perform clutch functions. The pump wheel and turbine form a working pair, similar to two fans placed opposite each other, where the wind generated by one active fan drives the blades of the other passive fan to rotate, with the flowing air—wind—serving as the medium for kinetic energy transmission. 2. DSG: The DSG transmission is distinctly different from traditional automatic transmissions, as the DSG does not use a hydraulic torque converter from the outset. This transmission was not developed based on the conventional concept of an automatic transmission. The engineers who designed the DSG took an innovative and entirely new technological path, cleverly combining the flexibility of a manual transmission with the convenience of a traditional automatic transmission.
11
1
Share

What is the phenomenon of drivers using their eyes, ears, hands, and feet simultaneously while driving?

Drivers using their eyes, ears, hands, and feet simultaneously while driving is known as attention allocation. Here is relevant information: 1. Driving precautions: Suburban roads: There are many intersections, so be cautious of motorcycles and bicycles suddenly appearing from side roads. Avoid driving too close to the right boundary of the road and maintain sufficient safety distance. When pedestrians (especially the elderly or children) are present, remain highly alert, keep a safe distance, and control your speed. 2. "Three precautions": Pay attention to food hygiene: Due to the mobile nature of driving jobs, always choose clean and hygienic restaurants when dining to prevent infectious diseases. Pay attention to rest: Ensure adequate sleep to stay energetic and focused, enabling safe driving. Maintain a safe following distance: While driving, keep sufficient longitudinal and lateral safety distances, always be aware of the movements of vehicles and pedestrians, and avoid following the vehicle ahead too closely or driving side by side to prevent rear-end collisions and side-swipe accidents.
18
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.