What to Pay Attention to When Picking Up a New Car?

1 Answers
McEverly
07/24/25 6:14am
Here are the things to pay attention to when picking up a new car: 1. Pick-up time: Choose a time with ample sunlight. Only under sufficient light can you spot minor flaws in the car's paint. 2. Inspect the bumper and body gaps: Observe at an angle towards the sunlight and from multiple perspectives. A qualified paint job should be smooth, free of orange peel or water ripple flaws, and there should be no color difference on easily damaged parts like the bumper, body, door edges, and side mirrors. 3. Additional checks: For metallic or pearlescent paint, you can also check the uniformity of aluminum or mica particles in the paint for further assessment. 4. Labels: Check the lower right corner of the window glass for relevant labels. Only original factory glass will have these marks, preventing post-factory tampering or replacement.
Was this review help?
18
2
Share
More Forum Discussions

What are the temperature conditions for engine oil storage?

Engine oil should be stored at a temperature between 23-30 degrees Celsius. Below is relevant information about engine oil: 1. Four-stroke engine oil: The winter oil grades in the SAE lubricant viscosity classification are 0W, 5W, 10W, 15W, 20W, and 25W. The symbol W stands for winter, and the smaller the number before W, the lower the low-temperature viscosity, the better the low-temperature fluidity, and the lower the applicable minimum temperature. 2. Two-stroke engine oil: Two-stroke gasoline engine oil has two viscosity grades, namely SAE20 and SAE30. Generally, SAE30 is selected. If it is separate lubrication, used in cold regions, or for ultra-light load two-stroke engines, SAE20 is used.
5
4
Share

Does Tire Oil Damage Tires?

Tire oil can indeed damage tires. Gasoline has a swelling effect on rubber, and when gasoline molecules penetrate the tire's cord structure, they can separate the cords from the rubber, creating voids and thereby reducing the tire's strength. Used engine oil contains impurities that not only fail to maintain the tire but can also damage it, being highly corrosive and accelerating the aging process of the tire. Instead, applying tire wax is recommended. Its primary function is to restore the tire's original new appearance, block UV damage, prevent rubber from aging, cracking, and fading, effectively extending the tire's lifespan. It can thoroughly remove oil stains and dirt from the tire and provides a protective layer to prevent the tire from hardening. After application, it restores the tire's original black color, leaving it clean, shiny, and resistant to dirt.
9
5
Share

Is Neutral Gear the Same as P Gear?

Neutral gear is not P gear; N gear is the neutral gear. Automatic transmission vehicles are equipped with both P gear and N gear. Both P gear and N gear can be used when parking, but they are different, and their usage scenarios also vary. The structures of N gear and P gear differ: P gear has a locking mechanism, while N gear does not. When P gear is engaged, the locking mechanism can lock the transmission gears, which indirectly locks the wheels. In this state, the car cannot move even without applying the handbrake. When N gear is engaged, there is no locking mechanism to secure the transmission gears, so the car can move if the handbrake is not applied. N gear is used for short-term parking without turning off the engine, while P gear is used when parking and turning off the engine.
4
3
Share

What are the penalties and point deductions for fatigued driving?

If caught for fatigued driving, 12 points will be deducted. Below is an introduction to the relevant content: 1. Data: For vehicles equipped with electronic license plates, if the driving duration exceeds 4 hours or there is no 20-minute rest after driving for 4 hours, the traffic police system will have relevant data. 2. Comparison: Compared to the previous penalty of deducting 6 points for fatigued driving, the current punishment is more severe, aiming to make drivers take fatigued driving more seriously. Only when everyone complies with the regulations can accidents caused by fatigued driving be fundamentally eradicated. Below are extended solutions for drowsy driving: 1. Listen to the radio instead of music: Stimulates the excitement of brain nerves. 2. Chew sugar-free gum: Chewing gum can enhance the driver's positive mood and feelings. 3. Apply cooling oil to the nose: Inhaling through the nose can directly stimulate the brain. 4. Drink functional beverages: Helps to refresh and awaken the mind. 5. Drink saline water: Doctors recommend that car owners drink 500~1000ml of sugar-salt water before setting off.
8
0
Share

What to Do When a Car's Air Filter Gets Wet?

When a car's air filter gets wet, you should open the air filter housing to clean out the water and replace the wet air filter. Below is an introduction to related content: 1. Air Filter: An air filter is a type of filter, also known as an air filter cartridge, air cleaner, or air element. It is mainly used for air filtration in engineering vehicles, cars, agricultural vehicles, laboratories, sterile operating rooms, and various precision operating rooms. 2. Impact on the Engine: The engine needs to intake a large amount of air during operation. If the air is not filtered, the dust suspended in the air will be sucked into the cylinders, accelerating the wear of the piston group and cylinders. The air filter is installed in front of the carburetor or intake pipe to filter out dust and sand particles from the air, ensuring that sufficient and clean air enters the cylinders.
16
3
Share

What Causes One Side of Car Air Vents to Blow Cold Air While the Other Side Blows Hot Air?

Car air vents blowing cold air on one side and hot air on the other can be caused by insufficient refrigerant, low efficiency of the air conditioning compressor, dirty condenser and evaporator, or malfunctioning air flaps. Here are the detailed explanations: Insufficient Refrigerant: When refrigerant is insufficient, the evaporation and heat absorption process of the liquid refrigerant entering the evaporator ends quickly, causing one side of the evaporator where the refrigerant flows in to absorb heat and cool down, while the side where the refrigerant flows out has no heat absorption effect. Low Efficiency of the Air Conditioning Compressor: If the air conditioning compressor is faulty and operates at low efficiency, the liquefaction of the refrigerant will be insufficient. In this state, the refrigerant entering the evaporator will have severely reduced heat absorption efficiency, leading to poor cooling performance, ultimately resulting in the airflow temperature from the vents failing to meet the standard. Dirty Condenser and Evaporator: If the car's air conditioning system is not cleaned for a long time, the condenser and evaporator can become covered with dust, lint, and other debris, weakening the refrigerant's effectiveness or reducing the heat absorption efficiency during the refrigerant's state change. This prevents the air from being fully cooled, leading to temperature differences in the airflow output from different vents. Malfunctioning Air Flaps: Faults in the air duct adjustment flaps or the flap drive motor in the air conditioning system can cause the air ducts to fail to close tightly.
16
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.