What to Pay Attention to When Making a Left Turn While Driving

1 Answers
DeDelaney
07/29/25 11:47am
Precautions for making turns while driving: 1. Wide turning radius: When making a left turn, try to turn as widely as possible. To avoid hazards such as obstruction or collision, aim to turn into a farther point. 2. Check the rearview mirror: Always check the rearview mirror before turning to ensure there are no vehicles or pedestrians on the side or behind you. 3. Watch for blind spots: Beginners often focus only on the front or left side while turning, neglecting blind spots, which may lead to hitting the curb or causing a scrape. Always check for obstacles below the rearview mirror, and if necessary, open the door to take a look before turning. 4. Control the steering wheel: Proper steering wheel control is crucial when turning. For sharp turns, turn the wheel as much as needed and gradually straighten it after completing the turn. For wide turns, steer slowly and steadily.
Was this review help?
16
5
Share
More Forum Discussions

How to Restore a Malfunctioning Mercedes System?

Mercedes system malfunction is caused by sensor failure after prolonged exposure to summer sunlight, and it is recommended to visit a 4S store for repair. Below is relevant information about Mercedes: 1. Definition: A German automotive brand, considered one of the most successful premium car brands in the world, renowned for its perfect technical level, stringent quality standards, innovative capabilities, and a series of classic coupe models. 2. Performance: The well-balanced SLK sports car is equipped with a 4-cylinder 2.3-liter large turbocharged engine, delivering a maximum output of 193 horsepower. It consumes 8.2 liters of fuel per 100 kilometers, accelerates from 0 to 100 km/h in just 6 seconds, and has a top speed of 237 km/h.
4
4
Share

Does the Seat Position (Forward or Backward) Affect the Reference Points in Reverse Parking?

It does have an impact. The height of the driver's seat can affect the timing of observing the rearview mirrors and judging surrounding markers. Below is relevant information: 1. Introduction: The driver's test is a qualification examination organized by the Vehicle Management Office of the Public Security Bureau. Only by passing the driver's test can one obtain a driver's license and legally operate a motor vehicle. 2. Content: The motor vehicle driver's test is divided into the following sections: the examination on road traffic safety laws, regulations, and related knowledge (also known as the "theoretical test", abbreviated as "Subject 1"), the on-site driving skills test (commonly known as the "pole test", abbreviated as "Subject 2"), and the road driving skills and safe, civilized driving knowledge test (commonly known as the "road test", abbreviated as "Subject 3"). The test content and passing standards are unified nationwide, with corresponding test items specified according to different types of vehicles eligible for driving.
17
0
Share

What are the techniques for parking an automatic transmission car on a slope?

Automatic transmission slope starting techniques are as follows: 1. Increase foot speed: Quickly move your right foot from the brake pedal to the accelerator pedal and press down. 2. Heel-and-toe technique: While pressing the brake with the ball of your right foot, use your right heel to press the accelerator, and the speed at which you release the brake with the ball of your foot and press the accelerator with your heel must be controlled steadily. 3. Use your left foot to brake: After stopping the vehicle on the slope with your right foot on the brake, slowly move your right foot away and place your left foot on the brake, then use your right foot to press the accelerator. 4. Use the handbrake to stop: Stop the vehicle on the slope using the foot brake, then pull up the handbrake, place your right foot on the accelerator and press lightly, and once you feel the vehicle is about to move, slowly release the handbrake.
1
0
Share

What does 'Da Ben Che' mean and is it worth buying?

Buying a car with 'Da Ben' refers to purchasing a vehicle with the 'Vehicle Registration Certificate' and paying the full amount in one lump sum. Here is relevant information about 'Da Ben Che': 1. Introduction to 'Da Ben': 'Full payment' means the original owner bought the vehicle either with a one-time full payment or through installments but has already completed the payments. It can also be understood that the car fully belongs to the owner and there are no outstanding bank debts. 'Da Ben' refers to the 'Vehicle Registration Certificate.' 'With Da Ben' indicates that the owner has paid in full and owes no money, which is why the bank has handed over the 'Da Ben' to the owner. 2. Other meanings of 'Da Ben': Additionally, 'with Da Ben' also implies that the owner has not mortgaged the car to any other financial institution to borrow money (since mortgaging a vehicle typically involves withholding the 'Da Ben').
1
3
Share

Where is the chassis number stamped on the Jianghuai Refine?

The chassis number stamp of the Jianghuai Refine M4 is located on the engine block, with the chassis number positioned in the front half of the frame. Below is relevant information about the chassis number: 1. Definition: The chassis number, known as the Vehicle Identification Number (VIN) in Chinese, is a unique set of characters assigned by the manufacturer to identify a vehicle. 2. Composition: The VIN consists of a 17-character alphanumeric code, also referred to as the 17-digit identification code, chassis number, or 17-digit number. The arrangement of the vehicle identification code ensures that no two vehicles of the same model will have identical numbers within 30 years, providing a unique identifier for each vehicle. Hence, it can be considered the "vehicle's ID card."
1
1
Share

Why won't the car move?

The car can shift gears but won't move, which is a clutch-related issue. Here are other possible causes: 1. Oil pump drive gear fracture: The oil pump drive gear is driven by the keyway shaft on the torque converter housing. If the torque converter is improperly installed, it may crush the drive gear, or work fatigue may cause the drive gear to fracture. Therefore, when installing the transmission onto the torque converter, ensure the torque converter shaft key is inserted into the oil pump drive gear keyway before tightening the bolts between the transmission and the engine block. 2. Control system failure: Check the connection between the shift lever and the manual valve. If the shift lever is separated from the manual valve or not properly aligned, it will prevent the transmission from engaging and shifting into the correct gear. Check if there are any clutches or brakes that are involved in both forward and reverse gear operations.
14
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.