What to Pay Attention to When Driving on the Highway?

2 Answers
Briella
09/01/25 2:42am
Highway driving requires attention to pre-trip checks, road signs, timely rest, etc. The specific details are as follows: Conduct a thorough vehicle inspection beforehand: Focus on fuel, engine oil, tire pressure, lights, etc., and plan your route in advance. Pay attention to road signs: Drive correctly in the appropriate lane. If you need to overtake, always signal in advance, check your mirrors, and then move into the overtaking lane. After overtaking, follow the same steps: signal in advance, check your mirrors, and return to the driving lane. Since highway speeds are high, road signs can pass by quickly, so it's crucial to stay alert or rely on navigation. If you miss an exit, don’t panic or attempt to brake suddenly or make a U-turn. Instead, continue driving at the same speed and find the next exit to return to your route. Take timely breaks: If you feel drowsy, make sure to stop at a service area to rest. Never drive while fatigued. Maintain a safe distance: For new drivers, who may lack experience, misjudgments can easily occur. It’s important to control your speed and keep a greater distance from the vehicle ahead. Always hold the steering wheel firmly at high speeds. When changing lanes or overtaking, avoid making sharp turns to prevent the car from drifting due to high speed. When braking, it’s best to brake in several stages rather than slamming on the brakes, to avoid losing control of the vehicle. Monitor your speed: The minimum speed on the highway should not be below 60 km/h, and the maximum speed should not exceed 120 km/h.
Was this review help?
18
4
Share
OJuliana
09/13/25 5:37am
When driving on the highway, I always remind myself not to get carried away by the thrill of speeding. Maintaining a safe distance is crucial—I usually keep at least 100 meters to allow buffer time and prevent rear-end collisions. I also make sure to stay within the speed limit, as highway cameras are no joke. Regularly checking tire pressure and tread wear is essential to avoid dangerous blowouts at high speeds. Fatigue is a major enemy, so I take a break every two hours at rest areas to stretch. Weather changes require extra caution: reduce speed and use fog lights in rain or fog, and avoid dazzling others with high beams. Setting the navigation for exits in advance helps prevent missing them and unnecessary detours. Additionally, keeping an emergency kit with a warning triangle and tools ensures preparedness for self-rescue in case of trouble.
Was this review help?
9
0
Share
Expand All
More Forum Discussions

What are the symptoms indicating insufficient engine oil?

Symptoms indicating insufficient engine oil include the following: 1. The oil warning light on the dashboard, resembling a teapot with a drop of liquid in front of the spout, will flash continuously. Engine oil is crucial for engine health; insufficient oil can lead to premature wear or even engine failure. The engine may produce unusual noises, and normal driving speed may decrease. 2. The engine may exhibit high water temperature, valve noise, and knocking sounds, with severe cases leading to cylinder scuffing. Insufficient oil can also cause poor lubrication, resulting in component wear and damage to mechanical parts of the engine, such as the crankshaft.
17
5
Share

What Must Front Airbags Work With to Fully Function?

Front airbags must work in conjunction with seat belts to fully deliver their protective effects. Below is an introduction to seat belt-related information: 1. Function: Seat belts serve to restrain movement and provide cushioning, absorbing impact energy and dissipating inertial forces to prevent or reduce the severity of injuries to drivers and passengers. Automotive accident investigations show that wearing a seat belt can reduce fatalities by 57% in frontal collisions, 44% in side collisions, and 80% in rollovers. 2. Principle: When a severe frontal collision occurs, the inertia causes the occupants' bodies to move forward rapidly. At this point, the seat belt exerts force to "pull back" the occupants' bodies, absorbing some of the impact energy, while the airbag inflates and fully deploys.
3
3
Share

Which is hotter, the upper or lower radiator hose under normal conditions?

When the thermostat is closed, the upper and lower hoses are at the same temperature. When the thermostat opens, the upper hose temperature is higher than the lower hose. Here are relevant explanations: 1. Thermostat working principle: The thermostat automatically adjusts the water flow entering the radiator based on coolant temperature, altering the water circulation range to regulate cooling capacity and ensure the engine operates within proper temperature ranges. The thermostat must maintain good technical condition, otherwise it will seriously affect normal engine operation. 2. Thermostat failure: A failed thermostat prevents water from being sent to the radiator even when reaching baseline temperature, or sends insufficient water, causing engine overheating and continuous operation of the electric fan.
7
3
Share

What is the Difference Between a Timing Chain and a Timing Belt?

The differences between a timing chain and a timing belt are as follows: 1. Different materials: Ordinary timing belts are made of rubber, which is prone to breakage; timing chains are sturdier and less likely to break. 2. Different noise levels: Because rubber products are soft and elastic, their connection with the camshaft and crankshaft is not rigid, so they offer better noise control compared to timing chains. 3. Different replacement cycles: Timing belts have a relatively short lifespan, generally requiring replacement every 3-4 years or around 60,000-80,000 kilometers, and must be replaced on time. The 'tensioner' of a timing chain has a wear lifespan of only 80,000-100,000 kilometers and also needs to be replaced when the time comes.
7
0
Share

What are the symptoms of a bad timing gear?

When the timing gear is damaged, the vehicle may experience issues such as unstable idle speed and poor acceleration, and fuel consumption will also increase significantly. Below is relevant information about timing gears: 1. Overview: A timing gear is a gear in mechanical devices that serves to position the time scale for completing related control functions. 2. Types: There are three transmission methods for timing gears: chain drive, toothed belt drive, and gear drive. Passenger car engines use toothed belt drive for both the positive and negative gears. This transmission method has advantages such as simple structure, low noise, smooth operation, high transmission accuracy, and good synchronization. However, its strength is relatively low, and after long-term use, it is prone to aging, stretching deformation, or breakage, making it difficult to observe its working condition.
13
3
Share

What engine and transmission does the Lynk & Co 02 have?

Lynk & Co 02 is equipped with a 1.5T turbocharged engine and a 2.0T turbocharged engine, paired with a 7-speed dual-clutch transmission and a 6-speed automatic manual transmission. More information about the Lynk & Co 02 is as follows: 1. As the second key model of the Lynk & Co brand, the Lynk & Co 02 is positioned as a high-performance coupe SUV. Together with the Lynk & Co 01, it forms the brand's SUV twin-star strategy, targeting the mainstream SUV market. While meeting the needs of different consumer groups, it also represents the Lynk & Co brand's expression of the personalized era for contemporary young people. 2. In terms of exterior design, the Lynk & Co 02 continues the family style pioneered by the Lynk & Co 01, successfully evolving into "Urban Contrast Aesthetics." The front face features an urban skyline design, with integrated headlights and grille making the front appear wider. The split-type headlights are the most distinctive design of Lynk & Co models, with the second-generation "Polar Light" LED daytime running lights located at the top of the front, integrating turn signal functions.
12
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.