What to Pay Attention to When Driving in the Rain?

2 Answers
SanSteven
07/23/25 11:44pm
The precautions for driving in the rain are: 1. Turn on the hazard warning flashers to alert vehicles in front and behind. Rainy days are high-risk times for traffic accidents, as visibility decreases for drivers, and rain reduces the friction between tires and the road, increasing the likelihood of accidents or mishaps. 2. When the rain is heavy, it can obstruct the driver's view, so it's advisable to turn on the headlights or front fog lights. 3. Drive at a reduced speed in the rain, always pay attention to the distance between your vehicle and those in front and behind, increase the safety distance, and be mentally prepared to take various emergency measures. If necessary, turn on the hazard warning lights to ensure that following vehicles are aware of your movements ahead, helping to prevent accidents or mishaps.
Was this review help?
19
4
Share
DeSebastian
08/10/25 7:36pm
Driving in the rain requires extra caution. I always reduce my speed when it rains because wet roads increase braking distance, and I maintain at least three times the usual following distance for peace of mind. Remember to turn on your low beams so vehicles in front and behind can see you clearly—if the rain is particularly heavy, use your fog lights as well. Check your windshield wipers in advance; replace the rubber blades if they don’t clear the windshield properly, as blurred vision while driving is extremely dangerous. When taking curves, avoid sharp turns and slow down early for safety. If you encounter standing water, don’t charge through impulsively—first observe how deep it is based on other vehicles passing through, then proceed slowly. Using the air conditioner’s cold air is the most effective way to defog windows, and don’t forget to activate the rearview mirror heating function. Also, be extra cautious at intersections, as pedestrians with umbrellas or raincoats may have obscured visibility. If your tire tread depth is below 3mm, replace them immediately to avoid skidding or failing to brake. In short, drive slowly, steadily, and stay extra observant in rainy conditions.
Was this review help?
8
2
Share
Expand All
More Forum Discussions

What is the tire pressure reset method for the Toyota Sienna?

Toyota Sienna tire pressure reset method involves a small black button located under the dashboard on the driver's side. After turning on the ignition, press and hold the button for more than three seconds to reset. Tire pressure refers to the air pressure inside the tires, and the level of tire pressure plays a crucial role in the performance and power of the vehicle. Taking the 2021 8-seater Sienna as an example, its body dimensions are 5175mm in length, 1995mm in width, and 1775mm in height, with a wheelbase of 3060mm. It is equipped with a 2.5L naturally aspirated engine, paired with an E-CVT continuously variable transmission. The front suspension type is MacPherson independent suspension, and the rear suspension type is multi-link independent suspension.
9
0
Share

How much antifreeze should be added in general?

Generally, about 5 to 6 liters of antifreeze is sufficient. The functions of antifreeze are: 1. Providing freeze protection for the engine; 2. Preventing the coolant from freezing and cracking the radiator or damaging the engine cylinder block or cylinder head when parking in cold winters; 3. Offering efficient heat dissipation; 4. Effectively preventing failures caused by boiling over and overheating during summer use. Antifreeze is classified into: 1. Ethanol-water type with a freezing point of -114°C and a boiling point of 78.3°C; 2. Glycerol-water type with a freezing point of -17°C and a boiling point of 290°C; 3. Ethylene glycol-water type with a freezing point of -11.5°C and a boiling point of 197.4°C.
18
5
Share

How Long Is the Break-in Period for a General Car?

Generally, the break-in period for a car is within 5,000 kilometers. The precautions are as follows: 1. Maintain a smooth start, avoid sudden acceleration, and do not let the engine speed become too high; 2. Before starting, the water temperature should reach above 50 degrees Celsius, start in a low gear, and shift to a high gear after 1 kilometer; 3. Shift gears promptly while driving, avoid using one gear for too long, and do not use a high gear for low-speed driving or a low gear for high-speed driving; 4. Choose good road conditions to avoid excessive vibration and impact, and disengage the clutch before braking; 5. Use high-quality fuel and engine oil, and avoid using engine wear-resistant additives.
12
4
Share

What is the size of the original tires on the Lamando?

The original tire model of the Lamando is 205/60R16, with a rim size of 16 inches. Tires are circular elastic rubber products assembled on various vehicles or machinery to roll on the ground. Mounted on metal rims, they support the vehicle body, cushion external impacts, ensure contact with the road surface, and guarantee the vehicle's driving performance. The Lamando's body dimensions are 4615mm in length, 1826mm in width, and 1425mm in height, with a wheelbase of 2656mm. The front suspension type of the Lamando is MacPherson independent suspension, and the rear suspension type is multi-link independent suspension. In terms of appearance, the Lamando features two chrome decorations on the upper grille, seamlessly connected with chrome headlight brows. The front bumper, paired with the lower grille, extends horizontally towards both sides.
14
1
Share

What is the purpose of car fog lights?

Car fog lights are used for road illumination during rainy or foggy weather conditions. They can penetrate thick fog and serve to alert oncoming drivers, making it easier for drivers behind to spot your vehicle. They are primarily used in environments with low visibility such as fog, snow, rain, or dust. Fog lights can increase the operational distance. In foggy conditions where visibility is low and the driver's line of sight is restricted, the strong light penetration of yellow anti-fog lights can enhance visibility for both the driver and other traffic participants, allowing approaching vehicles and pedestrians to detect each other from a greater distance. Fog lights should only be turned on when visibility is below 200 meters.
17
1
Share

What is the button with an 'a' and a circle in a car?

In a car, the button with an 'a' and a circle is the auto-hold function button. Pressing it once activates the auto-hold function, and pressing it again deactivates it. The auto-hold function is an extension of the vehicle stability control system, which controls the four-wheel braking through ESP. During the auto-hold process, the ECU computer uses sensors installed in the car to determine the vehicle's levelness and wheel torque, deciding whether braking is needed to prevent rolling. The braking force applied to the wheels is not excessive—just enough to stop the vehicle from moving, ensuring that when the accelerator is pressed again to move forward, there won't be a severe lurching motion.
14
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.