What to Pay Attention to When Driving an Unfamiliar Car?

How to adjust the height of the seat in Baojun 510?

Baojun 510 features a 4-way electric seat adjustment. Simply press the button located below the left side of the driver's seat to adjust the seat height up and down. Here is some information about the Baojun 510: 1. The Baojun 510 is positioned as a compact SUV, adopting a new family-style design. The headlights feature a split layout, with slim and sharp LED daytime running lights on top and hexagonal headlights below for low and high beams. 2. The side of the car features a high waistline design, and the currently popular floating roof is also applied. The new car measures 4220mm in length, 1740mm in width, 1615/1625mm in height, with a wheelbase of 2550mm.

6

3

Share

What to do if the steering wheel is still off-center after wheel alignment?

If the steering wheel is not straight after wheel alignment, it is definitely necessary to seek professional help from an auto repair shop or a 4S store, as this issue cannot be resolved on your own and requires the support of mechanical equipment. You can try performing wheel alignment and wheel dynamic balance again. It is also necessary to check the tire pressure. The following are the reasons for an off-center steering wheel: 1. After a period of use, the steering wheel may become off-center, which can be related to tire pressure, tire wear, wear of various chassis components, and wheel alignment. You can first measure the tire pressure on both sides. When the tire pressure on both sides is inconsistent, the vehicle will tend to drive towards the side with lower pressure. If the tread wear on the two front tires is inconsistent, it can also cause the vehicle to pull to one side. 2. If there are no issues with the tires, it is recommended to visit a 4S store to check the condition of the chassis components. Changes in wheel alignment values can also cause the steering wheel to become off-center after a period of use. Additionally, it could be due to the tie rod shifting to one side, resulting in an off-center steering wheel.

15

3

Share

How to Remove Snow from a Car

First, start the car and turn on the heater to blow warm air onto the front windshield. Then, use a brush or towel to remove the snow. If there is ice, residues can be cleared using tools like an ice scraper or plastic scraper. Only after the snow is mostly removed and the ice on the windshield has melted should the wipers be used normally. Below is information on removing snow from cars: 1. The first scenario is loose snow. Loose snow refers to the layer of snow that falls on the car's surface without an underlying layer of ice. This type of snow is the easiest to remove. Use a soft cloth or a gentle broom to sweep the loose snow away, always moving in the same direction. Never activate the wipers before clearing the snow. Snow on the car body doesn’t need to be removed immediately—if it’s loose snow, it will naturally melt away once the car is started. 2. The second scenario involves a thin layer of ice beneath the snow. This situation is more challenging to handle. First, do not use the wipers. If the ice layer on the glass is thick, use a rubber or hard glass scraper to gently scrape it off, preferably moving in one direction. Specialized snow removers are now available for better results. Additionally, use a soft broom to gently scrape the side mirrors in one direction until the ice fragments are removed. 3. The third scenario is when the car is covered in thick frost and ice. Some car owners might be tempted to use warm water to melt the ice, but this method is not advisable as it can deform the windshield and wipers or even damage the wipers directly. For thick ice layers, it’s recommended to use professional antifreeze windshield fluid sprayed onto the glass, followed by a rubber scraper to remove the ice. In most cases, the ice will slide off on its own. The same method can be used to remove ice from other parts of the car. Starting the engine and setting the air conditioning to heat, with the airflow directed to the "windshield" setting, can also help remove ice more easily.

13

0

Share

Can ETC be installed on the black area of the car's front windshield?

The ETC device can be installed on the black dotted area of the windshield, as long as it does not obstruct the driver's view and can sense the toll station's detection equipment. However, installing it on the black dotted area of the windshield also has drawbacks, such as reduced solar charging capability of the ETC device, which may lead to power depletion over time. For small cars, the ETC is generally installed in the upper middle part of the front windshield, while for large vehicles like trucks and buses, the installation position is in the lower middle part. The suitable installation position should be no lower than 1.2 meters and no higher than 2.5 meters, with an installation angle between 30 to 90 degrees. For vehicles with built-in or aftermarket explosion-proof film, which may affect the signal transmission of the microwave communication link, the ETC should be installed in the microwave skylight band. Here are some considerations for installing ETC: Do not obstruct the view; it's best to install it behind the rearview mirror: Many car models have windshields with a large rearward tilt angle, which can reduce the driver's field of vision. If this is not considered when installing the ETC, it may increase the driver's blind spots. Installing it on the right side behind the rearview mirror can help avoid obstructing the view. Do not interfere with charging: The ETC electronic tag consumes power but generally does not require charging or battery replacement because it has a solar panel on the back for self-charging. Therefore, during installation, avoid the black dotted areas of the windshield and positions that may block the solar panel. Once installed, do not remove it arbitrarily: The button in the middle of the adhesive is an anti-removal rod connected to a switch. After the electronic tag is installed, the windshield will press the anti-removal rod in. If the tag is removed arbitrarily, the rod will pop out and trigger the switch, locking the electronic tag and rendering it unusable. In such cases, you will need to visit an ETC service point to unlock it. This mechanism is designed to prevent multiple vehicles from sharing one device. When using ETC, note the following: The ETC transaction sensing range is 8 meters. To prevent issues caused by the ETC device of the vehicle in front, maintain a distance of more than 10 meters from the vehicle ahead to avoid automatic payment for the preceding vehicle. The ETC lane recognition speed is 20 kilometers per hour. Driving too fast may result in failure to read the vehicle's device information, leading to payment failure. When using a debit card linked to ETC, insufficient balance may also cause payment failure.

1

2

Share

How often should the brake fluid be changed in the new Lavida?

Introduction to the brake fluid replacement interval for the new Lavida: The brake fluid in the Lavida should be changed every 30,000 kilometers or every two years. After prolonged use, the brake pump will experience varying degrees of wear, making it advisable to replace the car's brake fluid. Below is relevant information about automotive brake fluid: 1. As the medium that directly transmits braking pressure in a car's braking system, the performance of brake fluid significantly impacts the effectiveness of the car's braking force. Since brake fluid is hygroscopic, it continuously absorbs moisture from the surrounding air during use. 2. If brake fluid remains in the braking system for too long and absorbs a sufficient amount of moisture, vapor lock may occur in the system's pipelines during braking, affecting braking performance. In severe cases, this can even lead to complete failure of the braking system. Therefore, to ensure driving safety, automotive brake fluid should be strictly replaced at the recommended intervals.

9

0

Share

How to Deal with Fuel Tank Negative Pressure?

Clean or Replace the Charcoal Canister The charcoal canister is a crucial component in a car. If the charcoal canister becomes dirty or fails, blocking the fuel line, it can cause negative pressure in the fuel tank. If negative pressure occurs, the first step should be to check whether the charcoal canister is malfunctioning. Below is information about automotive fuel tanks: 1. Automotive fuel tanks are divided by function into standard tanks and heated tanks. Design Principle: Utilize the heat energy generated by the engine during operation, adding a thermal circulation system between the engine, fuel tank, and radiator. The original single fuel tank is redesigned into a combined fuel tank consisting of a main tank and an auxiliary tank. 2. A water heater is installed at the bottom of the fuel tank to use the heat energy generated by the engine to warm the main tank. The fuel supply pipe of the main tank and the fuel pipe of the auxiliary tank are connected to the engine fuel line through a fuel line switching valve. The auxiliary tank is used when starting the car, and after driving 5-8 kilometers, the switching valve is operated to switch the fuel line to the main tank. The main tank is filled with #0 oil, and the auxiliary tank is filled with #35 oil.

15

1

Share

What to Pay Attention to When Driving an Unfamiliar Car?

How to adjust the height of the seat in Baojun 510?

What to do if the steering wheel is still off-center after wheel alignment?

How to Remove Snow from a Car

Can ETC be installed on the black area of the car's front windshield?

How often should the brake fluid be changed in the new Lavida?

How to Deal with Fuel Tank Negative Pressure?

How to activate the autodown window?

What is the ground clearance of the Trumpchi GS4?

How to Cancel the Tire Pressure Warning on the Bora?

What car has a logo with five sticks?