What to Pay Attention to When Choosing Windshield Wipers

What engine does the Lynk & Co 05 use?

The Lynk & Co 05 is equipped with a 2.0-liter turbocharged engine, delivering a maximum horsepower of 254 hp, a maximum power output of 187 kW, and a peak torque of 350 N·m. It is paired with an Aisin 8-speed automatic transmission. An engine is a machine that converts other forms of energy into mechanical energy, including reciprocating piston engines, Stirling engines, steam engines, jet engines, and electric motors. The Lynk & Co 05 measures 4592 mm in length, 1879 mm in width, and 1628 mm in height, with a wheelbase of 2734 mm. The interior features a D-shaped three-spoke multifunction steering wheel, a high-sensitivity gesture touchpad, a newly designed electronic gear lever, and sporty paddle shifters.

4

2

Share

What to Do When Your Car Gets Flooded

The solutions for a flooded car are: 1. Remove the accumulated water inside the car, open all doors, and expose the vehicle to sunlight to allow the water to evaporate. If there is floor matting, it must be removed. Adjust the air conditioning to recirculate mode to expel moisture from the cabin through the air conditioning system. 2. Clean the electrical connection components in the engine compartment to prevent corrosion caused by water accumulation and sand residue. Chassis components are prone to lubricant deterioration during water exposure, especially those related to steering and transmission systems. Additionally, during a road test, listen carefully for any abnormal sounds from the chassis or consider disassembling and inspecting the chassis.

19

4

Share

Does an automatic transmission have a clutch?

Automatic transmissions do have a clutch, but it is an automatic clutch that does not require manual operation, and there is no clutch pedal. The clutch is located in the flywheel housing between the engine and the transmission, with the clutch assembly fixed to the rear plane of the flywheel by screws. The output shaft of the clutch serves as the input shaft of the transmission. Clutches are categorized into four types: electromagnetic clutches, magnetic particle clutches, friction clutches, and hydraulic clutches. An automatic transmission car uses an automatic transmission to regulate speed. While driving, the control system of the automatic transmission automatically selects the appropriate gear based on the engine's speed and load, replacing the driver's subjective judgment of timing and gear-shifting operations. There are two types of automatic transmissions: continuously variable automatic transmissions and stepped automatic transmissions.

6

5

Share

Why does the engine idle unstably when braking?

The reasons for unstable idle when braking are: 1. Oil accumulation and carbon deposits in the throttle body, and dirty intake passages; 2. Weak spark due to faulty spark plugs, resulting in poor fuel atomization; 3. Blockages in the fuel system, such as clogged fuel injectors, and intake pipe malfunctions; 4. Faulty sensors like the coolant temperature sensor, oxygen sensor, or throttle position sensor. There are three types of braking systems: service brakes, parking brakes, and anti-lock brakes. Service brakes are activated when the driver presses the brake pedal, transmitting braking force mechanically or hydraulically to the wheel's braking device to create friction. Parking brakes, also known as hand brakes, prevent the vehicle from rolling when parked. They typically come in two forms: a central brake mounted on the driveshaft or a direct rear-wheel braking system.

13

3

Share

What to Do When a Nail Punctures the Sidewall of a Tire?

Tires with nails puncturing the sidewall need to be replaced. The rubber on the sidewall is thin and prone to blowouts from the damaged area, making it impossible to repair. Situations where tires cannot be repaired include: 1. The diameter of the puncture hole in the tread exceeds 6 millimeters; 2. Damage or deformation to the bead, tread deformation, rubber corroded by chemicals, or damage from running flat; 3. Tires with bulges. Tire maintenance methods: 1. Check if the tire has reached the wear indicator warning line; 2. Check the air pressure every two months, not just by visually assessing the sinking amount; 3. Regularly inspect the tire for any damage; 4. If the two front tires have been repaired, they should be promptly moved to the rear wheels, and stones in the tread grooves should be removed; 5. Avoid exposing tires to oil and chemical substances.

11

2

Share

How often should the timing belt be replaced?

The timing belt should be replaced every 50,000 to 60,000 kilometers. As a rubber component, the timing belt, along with its accessories such as the timing belt tensioner pulley, timing belt tensioner, and water pump, will wear out or age with increased engine operation time. The timing belt is a crucial part of the engine's valve system, ensuring accurate intake and exhaust timing by connecting to the crankshaft and maintaining a specific transmission ratio. The upper part of the timing belt connects to the timing pulley on the engine cylinder head, while the lower part connects to the crankshaft timing pulley. The timing pulley is connected to the camshaft, with the contact point being the small rocker arm. The rocker arm generates pressure through the power transmitted by the timing belt, performing a lifting function.

17

1

Share

What to Pay Attention to When Choosing Windshield Wipers

What engine does the Lynk & Co 05 use?

What to Do When Your Car Gets Flooded

Does an automatic transmission have a clutch?

Why does the engine idle unstably when braking?

What to Do When a Nail Punctures the Sidewall of a Tire?

How often should the timing belt be replaced?

What are the symptoms of a bad motorcycle bearing?

How to Distinguish Between China V and China VI Emission Standards for Cars

Which country is Acura from?

How to turn on the cold air in Changan CS35?