What to Pay Attention to When Choosing Tires?

2 Answers
VonAnderson
09/06/25 8:29am
Here are the considerations for selecting tires: 1. Purchase from authorized stores or reputable shops. Authorized stores offer relatively better guarantees in terms of product quality and after-sales service. 2. Check the size of your vehicle's tires. Before buying new tires, make sure to clearly see your tire specifications, which are usually marked on the side of the tire. 3. Examine the tread depth and pattern. The tread is designed with various textures to ensure the tire's grip performance and prevent slippage. 4. Pay attention to the tire's production date. The main material of tires is rubber, and rubber tends to age over time with use or storage. 5. Avoid retreaded tires. Currently, some small roadside shops in the market often sell retreaded tires as new ones to cut costs. Consumers must be cautious when making their selection.
Was this review help?
8
5
Share
JaydenLee
09/18/25 8:04am
Choosing tires is all about safety. Tires are the only part touching the road. Worn-out treads lose grip, making them slippery in rain and less effective for braking at high speeds. With over a decade of driving experience, I learned the hard way: my nearly bald tires once almost caused me to hit a guardrail on the highway during rain—scared me to death. Now when replacing tires, I always check tread depth—keeping at least 1.6mm, which you can feel. Check tire pressure daily too; the recommended value is labeled on the door frame. Overinflation risks bulging and blowouts, while underinflation speeds wear and wastes fuel. Use tires with good water drainage in summer, and winter tires up north for anti-slip safety. Regularly inspect for cracks or bulges—don’t risk your life to save money. Tire shops offer free checks; frequent inspections are lifesavers.
Was this review help?
20
1
Share
Expand All
More Forum Discussions

What are the reasons for weaker bass in the rear speakers of a car compared to the front?

The reasons for weaker bass in the rear speakers of a car compared to the front include: poor bass quality of the playback source, issues with the sound card, and problems with the playback software. Below are the relevant explanations: 1. Poor bass quality of the playback source: Some DJ music has excellent bass quality, while others may suffer from compressed audio quality, leading to a flat and unimpressive bass. It is recommended to download high-fidelity music for playback. 2. Issues with the sound card and playback software: If the sound card software includes an equalizer and sound modes, the default or NONE setting should be selected. If the equalizer of the playback software is adjusted to lower the bass frequency range, the bass will also become less noticeable.
7
3
Share

What is the purpose of the Sport button in the Envision 28T Elite Edition?

Sport button refers to the sport mode button. Pressing this button activates the sport mode. Introduction to Sport Mode: Sport mode essentially adjusts and controls the engine's RPM to achieve gear shifting. Manufacturers pre-install software in vehicles to increase engine RPM, maintaining it within the maximum power range, allowing flexible power connection for transmission upshifts. Functions of Sport Mode: "Sport Mode" increases the engine's shift RPM to enhance power performance; "Snow Mode" initiates second-gear starts to prevent wheel spin on icy or slippery surfaces. Most automatic transmissions feature mode selection buttons, which may vary in name but generally serve similar purposes.
1
2
Share

Where is the engine computer board of the Audi Q3 located?

Audi Q3's engine computer board is located below the instrument panel. Engine Computer Board: The engine computer board is also known as the engine control module. The engine control module controls the output circuit by managing the grounding, or it controls the power circuit through transistors or a device called the output driver module. Audi Q3: The vehicle dimensions are 4481*1848*1584mm with a wheelbase of 2680mm. In terms of configuration, it comes with 18-inch wheels, LED headlights for both high and low beams, a 1.4T engine paired with a 7-speed dual-clutch transmission, delivering a maximum power of 150 horsepower and a peak torque of 250 N·m.
5
3
Share

What is the fuel consumption of the Haval H1 automatic transmission?

The fuel consumption of the Haval H1 is around 8.6L/100km. Vehicle fuel consumption is calculated based on the amount of fuel consumed per 100 kilometers traveled (usually referred to as 100 kilometers). Carbon deposit issues: Many car owners probably think of carbon deposits first when they notice an increase in fuel consumption. Carbon deposits are like grease on a range hood—very difficult to deal with. Carbon deposits can affect the compression ratio, cause poor ignition, dilute the air-fuel mixture, and adsorb fuel, among other issues. All these problems can impact fuel consumption. Air filter: The air filter can also affect the car's fuel consumption. When the air filter hasn't been replaced for a long time, clogging can reduce the engine's air intake, which can also lead to increased fuel consumption.
1
3
Share

Does Rain Affect the Car After Crystal Coating?

It is best not to expose the car to rain after crystal coating and to keep it dry for more than 24 hours. However, if it does get rained on, there is no major issue—just avoid washing the car. Below is some relevant information: 1. Crystal Coating: This is a hard protective coating specifically designed for key areas of the car, such as the paint surface, glass, tires, rims, seats, engine, interior, and exterior trim. 2. Principle: The fundamental requirement for crystal coating is that the material used is SIO2 inorganic. It forms several molecular-level structures on the applied surface, typically at the nanoscale. Through the action of high-molecular polymers, it creates a barrier layer on the surface. This layer has functions such as UV resistance, oil resistance, low surface energy, and hydrophobicity, thereby protecting the paint surface.
10
0
Share

What causes the transmission temperature of a BMW 730 to be too high?

BMW 730 transmission temperature too high reasons are as follows: Engine and water temperature too high: Prolonged or overloaded engine operation can increase the coolant temperature, thereby affecting the transmission's heat dissipation; additionally, insufficient coolant in the radiator reduces the cooling system's effectiveness, leading to transmission overheating; Transmission clutch slipping: Clutch slipping generates additional heat, raising the transmission temperature and degrading the transmission oil quality, which in turn increases transmission wear; Thermostat stuck: If the transmission's thermostat is stuck, the oil inside the transmission cannot enter the cooling system, preventing the heat generated by the transmission from being cooled.
15
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.