···
Log in / Register

What to Pay Attention to When Charging the Little Ant

3 Answers
LaRebecca
08/29/25 7:05am
Little Ant charging precautions: After exposure to high temperatures: Do not charge immediately after the new energy vehicle has been exposed to high temperatures. Prolonged exposure causes the power box temperature to rise, leading to an increase in battery temperature. Charging immediately can accelerate the aging and damage of internal wiring. Do not charge during thunderstorms: Avoid charging during thunderstorms. When it is raining with thunder, never charge the vehicle to prevent lightning strikes, which could cause combustion accidents. Do not turn on the air conditioning while charging: It is not recommended to turn on the air conditioning inside the car while charging a new energy vehicle. Using the air conditioner during charging increases the internal charge load on the battery, accelerates the battery degradation of the power battery pack, and reduces the battery's lifespan. Choose compliant charging stations: Select charging stations that comply with national standards. This not only protects your vehicle's battery but also ensures your safety.
Was this review help?
2
5
Share
SanAthena
09/11/25 4:41am
I remember when I first started driving an electric car, charging required extra caution, especially for micro vehicles like the Little Ant, which have relatively small battery capacities. First, always use the original charger and avoid cheap roadside alternatives to prevent voltage instability from damaging the battery. Before charging, check the environment—choose a dry, well-ventilated spot and never charge in the rain to avoid the risk of water ingress and short circuits. Also, avoid overcharging; typically, 6-8 hours of slow charging is sufficient, as charging overnight can accelerate battery degradation. I often set a phone alarm as a reminder to unplug the charger to prevent forgetting. Additionally, ensure the charging plug is securely connected—loose connections can lead to overheating or even sparks. Regularly monitor battery health through the app for any abnormal temperature readings, which helps prolong battery life and ensures safety. When using public chargers, opt for State Grid or reputable stations for better compatibility. In short, new EV owners should patiently develop good charging habits to minimize unexpected disruptions to their trips.
Was this review help?
7
2
Share
Expand All
McNova
10/25/25 5:30am
With years of experience in car repair, I've dealt with numerous charging issues for electric vehicles. The key to charging the Little Ant lies in preventing faults. Prioritize slow charging mode—while fast charging is convenient, it damages battery cells, so limit it to once or twice a week. Avoid high ambient temperatures; park in the shade during summer charging to prevent battery overheating and expansion. Always check the cleanliness of the charging port; wipe away dust to avoid poor contact and short circuits. Refrain from using the car's air conditioning while charging, as it wastes energy and prolongs charging time. Avoid letting the battery drop below 20% before charging; maintain a cycle between 40%-80% to extend its lifespan. I recommend inspecting charging cables monthly for cracks or wear and replacing them promptly. When using public chargers, ensure the power matches—the Little Ant is compatible with 7 kW standard chargers; avoid higher-power stations. These small habits, cultivated daily, save money, hassle, and repairs for your beloved car.
Was this review help?
7
4
Share
Expand All
More Forum Discussions

What is the Normal Fuel Consumption for City Driving?

Generally speaking, a fuel consumption of 7.5L per 100 kilometers is considered normal for city driving. The fuel consumption of a car is related to the driver's habits. Here are some bad driving habits that can lead to higher fuel consumption: Increasing vehicle weight: Every additional weight on the vehicle will correspondingly increase fuel consumption. Excessive decoration or using the trunk as a storage room are factors that can increase fuel consumption. Not filling up the tank: Frequent refueling leads to inconsistent fuel quality in the tank, which can cause incomplete combustion in the engine, affecting performance and fuel consumption. Improper use of brakes and accelerator: The cost of sudden braking or stopping is 2-3 times higher fuel consumption compared to driving at a constant speed. The optimal 'economical driving speed' for most cars is maintaining between 60-90 kilometers per hour.
1
5
Share

How to Use a Tiptronic Transmission?

The correct method to use a tiptronic transmission requires shifting the gear lever to the M position, followed by upshifting or downshifting based on the driving conditions. Introduction to Tiptronic Transmission: 1. A tiptronic transmission combines manual and automatic shifting modes in a vehicle. This type of transmission integrates the advantages of both automatic and manual transmissions, minimizing power loss in the shifting system to the greatest extent. 2. The manual mode in a tiptronic transmission differs from that in a purely manual transmission car. Although it includes a clutch mechanism, it does not require driver operation, functioning as an automatic clutch. 3. When using the manual mode in a tiptronic car, simply switch to manual mode and adjust the gear up or down according to speed changes.
3
4
Share

How Far Should You Switch to Low Beam When Driving at Night?

When meeting another vehicle at night, you should switch to low beam when the oncoming vehicle is more than 150 meters away. Use of high beam: For example, headlights must be turned on at night, and the distance between vehicles should be appropriately increased when overtaking at night. When the speed exceeds 30 km/h at night, high beam should be used, and the light must illuminate beyond 100 meters. These driving basics must be mastered. Other light usage: When driving at night, lights are essential auxiliary tools. In terms of usage, not only should you avoid turning on fog lights and headlights simultaneously, but you should also understand how to use and switch lights. The color of position lights is white at the front and red at the rear. When the light switch is turned to the first position, the lights that illuminate at the front and rear are the position lights.
17
4
Share

What Aspects Should Be Paid Attention to During a Test Drive?

Here is an introduction to the aspects that need attention during a test drive: Signing a test drive agreement: Before the test drive, the 4S store usually requires signing a test drive agreement, which is mainly to clarify the responsibilities of both parties, such as how to divide responsibilities in case of an accident. Understanding the test drive process: Generally, the test drive personnel will first demonstrate and operate the vehicle. During the driving process, the first step is to familiarize oneself with the vehicle's operation and performance. It is best not to change lanes, accelerate, or brake suddenly. If acceleration is necessary, choose an appropriate section of the road to avoid accidents during the test drive. 3. Safety precautions: The test drive route is usually designated by the 4S store, but even the designated route carries various risks. Ensure safety measures are in place. Both the test driver and the accompanying personnel, whether in the front or back seats, should fasten their seat belts.
19
2
Share

Do all three engine mounts need to be replaced together?

Engine mounts do not need to be replaced all three together. Here are the functions of engine mounts: 1. Eliminate resonance: When the engine is running, it generates certain vibrations. The rubber components in engine mounts can eliminate the resonance produced during engine operation; 2. Hydraulic pressure reduction: Some engine mounts also have hydraulic pressure reduction functions, with the main purpose being the same. If an engine mount is damaged, the vibrations from the engine will cause the entire vehicle body to vibrate; 3. Reduce accelerated damage: There are generally three engine mounts, fixed to the vehicle frame. If one is damaged and not replaced in time, it disrupts the balance and can cause the other two to wear out faster.
20
1
Share

What does 'how many liters of fuel consumption' mean?

Fuel consumption in 'how many liters' refers to the number of liters consumed per 100 kilometers. A car's fuel consumption is not only related to the car itself but also closely tied to the driver's habits and road conditions. Poor driving habits and frequent driving on congested roads will inevitably result in higher fuel consumption. More details are as follows: 1. Improving fuel economy: To enhance fuel efficiency while driving, it is advisable to avoid sudden acceleration and deceleration and maintain a steady speed as much as possible. This is the most fuel-efficient way to drive. 2. Avoid unnecessary overtaking: Unnecessary overtaking should also be minimized while driving. Frequent driving on congested roads can significantly increase fuel consumption. In such conditions, cars often have to stop and start frequently. Starting from a standstill requires substantial acceleration, demanding a large output of kinetic energy from the engine. If the car frequently stops and starts, fuel consumption will undoubtedly rise.
3
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.