What to Pay Attention to When Buying a Used Car?

1 Answers
Sanders
07/25/25 6:51am
When buying a used car, pay attention to: 1. Check if the patterns on the front and back pages of the vehicle license match when combined, and verify if the photo and chassis number on the license match the vehicle; 2. Vehicle insurance, confirm if the chassis number and engine number on the insurance policy match those on the vehicle license, and if the policy is still valid; 3. Vehicle registration certificate, check if the font on the registration certificate matches that on the vehicle license, and if the chassis number and engine number are the same as on the license. Also, verify if the manufacturing date and registration date align with the dealer's description, and check if the registration records show frequent transfers in a short period; 4. Inspect the screws on the car body components. If the vehicle has been repaired, screws may have been removed and parts replaced. In case of an accident, the original factory-fixed screws may have been loosened or replaced.
Was this review help?
6
4
Share
More Forum Discussions

Is it illegal to install widebody kits on modified cars?

Installing widebody kits on modified cars is illegal. Below is relevant information about car modifications: 1. Purpose: To enhance power performance. The modification of the powertrain system is the most crucial aspect of car modification. To improve a car's power, it is necessary to replace components such as spark plugs, high-voltage wires, air filters, fuel-saving accelerators, water-fuel devices, horsepower boosters, electronic rectifiers, and exhaust pipes. 2. Modification Methods: Enhancing car performance by modifying the engine involves increasing engine power while reducing fuel consumption, lowering exhaust emissions, and extending the engine's lifespan. The primary goal is to ensure that the combustible gases entering the engine are fully and completely mixed, allowing the powerful spark plugs to ignite the mixture for complete combustion. This involves replacing and upgrading components and installing auxiliary products to improve engine performance from three aspects: the air intake system, electrical system, and fuel system. The biggest advantage of this method is that the modified parts can be easily installed and removed, allowing the engine to be restored to its original state when not in use.
15
1
Share

Can the Clutch Control Vehicle Speed?

The clutch can control vehicle speed. Below are techniques for using the clutch to control speed: 1. Place the ball of your foot on the clutch pedal with your heel touching the ground. When the clutch is fully depressed, keep your knee slightly bent. 2. Female drivers should avoid wearing high heels. Never use only the toes to press the pedal or lift the heel off the ground, as this may lead to insufficient force or slippage. 3. Remember the positions of the clutch, brake, and accelerator—left foot for the clutch, right foot for the accelerator and brake. Additional information: Below are precautions for clutch usage: 1. During normal driving, do not rest your foot on the clutch pedal. 2. Avoid riding the clutch (partial engagement) while driving. In special cases where partial engagement is necessary, minimize the duration to prevent burning the clutch friction disc. 3. Do not release the clutch too abruptly. Generally, first gear requires the slowest release, while other forward gears should be slightly quicker.
18
5
Share

What does CNL mean on a car?

CNL on the car steering wheel is an abbreviation for "cancel," meaning to deactivate the cruise control operation. More information about cruise control is as follows: 1. The cruise control system is also known as the speed control device, speed control system, or autonomous driving system. 2. The function of cruise control: After setting the speed as required by the driver, the vehicle automatically maintains the speed without the need to press the accelerator pedal, allowing the car to travel at a fixed speed. 3. The cruise control controller is generally located near the steering wheel and is mainly divided into lever-type, steering wheel button-type, and steering wheel control group-type.
10
3
Share

How to judge the distance around the car?

Methods to judge the distance around the car: 1. Judge based on the position of the left wheels, provided that you know where the left wheels will pass to avoid the tires pressing on solid lines or avoiding potholes and stones on the road; 2. Judge through the side mirrors, which can observe the distance between the vehicle and the lane dividers to adjust the vehicle's position, or check the left and right distance through markers on the dashboard or the hood. When the speed exceeds 100 kilometers per hour, the safe distance should be more than 100 meters. According to the Road Traffic Safety Law of the People's Republic of China: When a motor vehicle is driving on the highway and the speed exceeds 100 kilometers per hour, the safe distance should be more than 100 meters; when the speed is below 100 kilometers per hour, the minimum safe distance should not be less than 60 meters.
1
5
Share

What Causes Airbags Not to Deploy?

Airbags may not deploy because the conditions for airbag deployment are not met. Necessary conditions for airbag deployment: 1. Vehicle speed is generally above 50 km/h, but the key factor is the acceleration at the moment of collision. In national certification tests, the instantaneous acceleration during collision is approximately -40g. 2. Frontal impact: The angle of impact must be within approximately 60° from the front. 3. Collision object: Rigid walls or obstacles. Airbags will not deploy when a car collides with soft objects at 80 km/h. 4. Deployment time: Within tens of milliseconds after the collision occurs.
12
5
Share

What is the Principle of Ultrasonic Sensors?

Ultrasonic sensors work on the following principles: 1. An ultrasonic sensor consists of a transmitting sensor (or wave transmitter), a receiving sensor (or wave receiver), a control unit, and a power supply. 2. The transmitter sensor is composed of a transmitter and a transducer using a ceramic vibrator with a diameter of about 15mm. The transducer converts the electrical vibration energy of the ceramic vibrator into ultrasonic energy and radiates it into the air. 3. The receiving sensor consists of a ceramic vibrator transducer and an amplifier circuit. The transducer receives the wave, generates mechanical vibrations, converts them into electrical energy, and outputs it as the sensor receiver, thereby detecting the transmitted ultrasound. 4. In practical applications, the ceramic vibrator used as a transmitting sensor can also be used as the ceramic vibrator for the receiving sensor. The control unit mainly controls the pulse chain frequency, duty cycle, sparse modulation, counting, and detection distance of the transmitter.
17
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.