What to Pay Attention to for Self-Driving Tours?

2 Answers
DeLaila
09/04/25 7:04am
Here are the precautions for self-driving tours: 1. Maintain good driving condition: Long-distance drivers must maintain good physical and mental condition, ensuring adequate sleep before driving. 2. Wear seat belts: Not only the driver and front-seat passengers, but also rear-seat passengers need to buckle up. If there are children under twelve years old in the family, it is recommended to purchase child safety seats produced by reputable manufacturers. 3. Driving in rain or snow: Turn on the fog lights and width indicator lights. Drive slowly, avoid overtaking casually in bad weather, gently press the accelerator, gently apply the brakes, and steer slowly. When overtaking, use the horn and headlights to signal, and only overtake after the vehicle in front makes way. Be extra cautious in dark and damp areas such as under overpasses and tunnel entrances, as they are prone to icing, and slow down.
Was this review help?
4
3
Share
JeremiahMarie
09/16/25 7:54am
As a frequent self-driving travel enthusiast, I always prioritize vehicle inspection before long trips. First, check tire pressure and tread wear—address severe wear or low pressure immediately to avoid blowout risks. Next, verify engine oil level, coolant, and brake fluid to ensure they're within normal ranges. Don’t skip light checks—headlights, fog lights, and brake lights must all function. Always carry a spare tire, emergency triangle, and basic toolkit in case of breakdowns. Use navigation apps to avoid traffic when planning routes, check weather forecasts, and slow down in rain. Pack enough water and snacks, and take breaks every two hours on long drives to prevent fatigue. A pro tip: depart at dawn for lighter traffic and a smoother journey.
Was this review help?
2
5
Share
Expand All
More Forum Discussions

Is an oil temperature of 120°C normal for a BMW X5?

A BMW 5 Series oil temperature of 120°C is normal for a short period, but if it remains at 120°C for an extended time, it is abnormal. Under normal circumstances, the working oil temperature of a BMW 5 Series car engine is generally between 70°C and 90°C. Poor lubrication: The component most susceptible to high temperatures is the engine oil. Excessively high temperatures can lead to increased oil evaporation, faster oil consumption, and thinning of the oil under prolonged high temperatures. This makes it difficult to form a proper lubricating film in areas requiring lubrication, resulting in increased friction and accelerated wear of internal engine components. In some cases, dry friction may even occur. Carbon buildup: Excessive temperatures can cause gasoline and engine oil to form carbon deposits and even sinter. Some of these deposits can directly affect combustion, leading to reduced vehicle performance, while others may enter the clearance between components, accelerating wear and even causing engine parts to seize. Increased mechanical loss: Excessively high temperatures can cause the engine to lose more power, with this energy being dissipated as heat, leading to a gradual increase in fuel consumption. Additionally, poor engine cooling can shorten its lifespan to varying degrees. An engine frequently operating at high temperatures may fail prematurely, making repairs impractical.
2
4
Share

What are the mnemonic rhymes for automotive data streams?

Automotive data stream mnemonic rhymes include: 1. Mass Air Flow (MAF) Sensor: Measures air intake precisely; air in equals fuel out; calculation relies on air-fuel ratio (14.7:1). 2. Intake Air Temperature (IAT) Sensor: Measures intake air temperature; determines air volume for fuel correction; installed on intake manifold or integrated with MAF; diagnosis similar to coolant temp sensor via resistance values: 2-3KΩ at 20℃, 0.4-0.7KΩ at 60℃. 3. Manifold Absolute Pressure (MAP) Sensor: Indirectly measures air intake; high vacuum at throttle release, low vacuum at throttle depression; increased fuel at low vacuum, proportional injection at partial loads; located downstream of throttle body. 4. Throttle Position Sensor (TPS): Primary load signal source; governs five major operating conditions (four directly related); closed throttle (idle) ≈0.5V, wide-open throttle ≈4.8V; controls both engine and transmission. 5. Coolant Temperature Sensor (CTS): Thermistor-based; mounted on coolant passage; irreplaceable for temperature signals; affects fuel trim and mixture; diagnose via resistance: 2-3KΩ at 20℃, 0.2-0.4KΩ at 80℃. 6. Knock Sensor: Piezoelectric type mounted on cylinder block; detects 6-9KHz vibrations to retard ignition timing; restores optimal timing after knock suppression; maintains combustion at knock threshold.
11
4
Share

Which model of Lavida is the Volkswagen SVW71521DF?

Volkswagen SVW71521DF is the 2019 model of Lavida. Below is relevant information about the Volkswagen Lavida: Introduction to Volkswagen Lavida: Lavida is a sedan produced by Shanghai Volkswagen. Tailored specifically for Chinese consumers, the LAVIDA Lavida retains the excellent quality of German design while incorporating many aesthetic concepts reflecting traditional Chinese culture and cutting-edge design elements. Technical highlights of Volkswagen Lavida: The design of Lavida originally stems from the Neeza concept car showcased at the 2006 Beijing Auto Show. The design elements derived from the Neeza concept car previewed the fundamental style of Volkswagen's localized sedan design in China. Compared to Volkswagen's products in Europe, the design of Neeza is relatively understated.
19
0
Share

What brand is the uppercase H car?

There are two car brands with the H logo. One is a circle with a straight H, which is Honda. The other is a circle with a slanted H, which is Hyundai. Honda: Honda, officially known as "Honda Motor Co., Ltd.", is a multinational automobile manufacturer listed on both the Tokyo Stock Exchange (TYO) and the New York Stock Exchange (NYSE). Hyundai: Hyundai is an automobile brand under Hyundai Motor Company, a Fortune 500 company. Its main models include the Sonata, Elantra, Santa Fe, and Tucson. Hyundai was founded in 1947 and is a South Korean car brand, primarily producing SUVs and family sedans with engine displacements ranging from 1.6L to 2.7L.
5
4
Share

Is the strong odor from car seat cushions toxic?

Car seat cushions with a strong odor may be toxic, primarily due to harmful chemical gases emitted by interior materials, including benzene, formaldehyde, acetone, and xylene. Here are some methods for eliminating odors in cars: Bamboo charcoal deodorization: Bamboo charcoal can absorb odors like formaldehyde in the car and can "fight" these odors over the long term, with relatively good effects. Vinegar deodorization: Placing a mixture of water and vinegar indoors can help stabilize formaldehyde. Leather formaldehyde-removing care liquid: Applying leather formaldehyde-removing care liquid to leather areas can effectively decompose formaldehyde, turning harmful substances into harmless ones.
3
4
Share

Is there a layer of glue-like substance on the car headlight surface?

Here are solutions for the glue-like layer on car headlight surfaces: Using essential balm to remove stubborn adhesive marks: Essential balm is an organic solvent capable of eliminating stubborn adhesive residues. Apply it to the adhesive marks, wait until fully penetrated, then wipe vigorously with a towel to remove without leaving traces. Exposing the car to direct sunlight in summer: After prolonged exposure, the glass becomes very hot, making it easier to peel off stickers. However, this method may reduce your vehicle's lifespan. Using automotive-specific cleaners: These can efficiently clean without leaving marks. If unavailable or after use, resort to the first method.
11
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.