What to Pay Attention to During the Probationary Period of a Driver's License

1 Answers
LeAriana
07/29/25 1:33am
Precautions during the probationary period of a driver's license: 1. Driving alone on highways is not allowed during the probationary period. A driver in the probationary period cannot drive alone on highways and must be accompanied by a driver with more than 3 years of driving experience in the passenger seat; otherwise, a fine of 200 yuan will be imposed. 2. Failure to display a "Probationary" sign on the rear of the vehicle will result in a 200 yuan fine. On one hand, drivers in the probationary period must display a "Probationary" or "New Driver" sign on the rear of the vehicle. Not displaying it will lead to a 200 yuan fine. On the other hand, they are absolutely prohibited from driving commercial vehicles, ambulances, rescue vehicles, and other special vehicles. 3. Accumulating 12 points on the license during the probationary period will result in its revocation. The penalties during the probationary period are no different and are imposed according to the "Regulations for the Implementation of the Road Traffic Safety Law" for traffic violations. However, it is important to note that accumulating 12 or more points during the probationary period will directly revoke the driving qualification for the permitted vehicle type. Once the license is revoked, the driver must reapply, take the tests, and obtain a new driver's license.
Was this review help?
17
1
Share
More Forum Discussions

Can a C1 License Drive a Motorcycle?

C1 driver's license does not permit the holder to drive a motorcycle. To drive a motorcycle, the driver must possess a D, E, or F license. Permitted vehicle types for C1 license: The C1 driver's license allows the holder to drive small and micro passenger vehicles, light and micro cargo vehicles; light, small, and micro special-purpose vehicles; and small passenger vehicles with a seating capacity of 9 or fewer people. Vehicles not permitted with a C1 license: large buses, tractor trucks, city buses, medium buses, large trucks, ordinary three-wheeled motorcycles, ordinary two-wheeled motorcycles, light motorcycles, wheeled self-propelled machinery, trolleybuses, and tramcars. Additionally, a C1 license does not permit driving vehicles with more than 9 seats or trucks with a total length exceeding 6 meters. Age requirements for C1 license: The minimum age requirement for a C1 driver's license is 18 years old, with no upper age limit. However, applicants aged 70 or older must pass tests on memory, judgment, and reaction abilities.
3
1
Share

What does the red OFF-P light on a Mercedes-Benz mean?

Mercedes-Benz OFF-P red light indicates a malfunction in the vehicle's parking sensors. The OFF-P indicator is the radar switch, which activates when the vehicle's speed is below 20 km/h and the reverse gear is engaged, causing the corresponding OFF-P indicator to illuminate on the dashboard. When OFF-P is activated, an alarm will sound when the distance to the vehicle ahead is less than 30 centimeters. If the OFF-P button light is on, the owner cannot clear it themselves. It is necessary to visit a 4S shop or a repair shop where professionals can use a diagnostic tool to confirm the fault code. Based on the fault code, the parking sensors can be repaired. Only after the repair is completed can the diagnostic tool be used to clear the fault light, thereby turning off the Mercedes-Benz OFF-P button light. Dashboard indicator lights come in three colors: red, yellow, and green. When a red indicator light comes on, it indicates a serious fault in the vehicle, and the owner should not continue driving. When a yellow indicator light comes on, it indicates a fault that is not as severe as the red light, and the vehicle can continue to be driven, but repairs should be done as soon as possible. When a green indicator light comes on, there is no need to worry, as it indicates that the function is operating normally.
12
2
Share

How often should the spark plugs of Volkswagen Tiguan be replaced?

Volkswagen Tiguan spark plugs should be replaced approximately every 70,000 kilometers. If the spark plugs are not replaced for a long time, it may cause various issues such as leakage in the vehicle's ignition system, increased fuel consumption, reduced power, and most importantly, difficulty in ignition, affecting the normal use of the vehicle. Spark plug replacement cycle: Under normal maintenance conditions, spark plugs should be replaced after driving 40,000 to 60,000 kilometers. However, this may vary depending on the brand and engine, so it is recommended to follow the user manual. The following standards can be used as a reference for maintenance and replacement: platinum spark plugs should be replaced at 40,000 kilometers, ordinary nickel alloy spark plugs at 20,000 kilometers, and iridium spark plugs at 60,000 to 80,000 kilometers. Steps for replacing spark plugs: Open the hood, lift the engine's plastic cover, and remove the high-voltage distributor wires. Mark each cylinder's position to avoid confusion. Use a spark plug socket to remove the spark plugs one by one. While removing them, check for any external debris such as leaves or dust and ensure they are cleaned thoroughly. Place the new spark plug into the spark plug hole, hand-tighten it a few turns, and then use the socket to tighten it further. Reinstall the removed high-voltage distributor wires in the order of the ignition sequence and secure the cover.
4
1
Share

How to Secure Car Decorations?

There are several ways to secure car decorations: 1. Rearview mirror hanging ornaments: The most common method for securing decorations on the rearview mirror is by hanging them. This not only looks aesthetically pleasing but also helps prevent the driver from feeling drowsy while driving, as the hanging ornaments sway back and forth. However, it's important to choose hanging ornaments that are not too long, as excessively long ones can obstruct the driver's view and pose significant safety hazards. 2. Double-sided tape: This is one of the most common and straightforward methods for securing decorations, especially effective for items placed on the dashboard. While using double-sided tape is simple, over time, the adhesive can stick to the dashboard, causing unavoidable contamination. 3. Anti-slip mats: This is a more high-end method of securing decorations. Anti-slip mats can effectively hold car decorations in place, making them a favorite among many consumers. However, when selecting anti-slip mats, it's crucial to pay attention to the material quality. Poor-quality materials can affect performance, especially suction power, which must meet standards. Additionally, environmental concerns should be considered, as prolonged exposure to sunlight may release harmful substances from the mats. Proper ventilation in the car is necessary. 4. Suction cup method: This method is most commonly used for securing items like phone holders. It is straightforward, but the suction power must be adequate. Insufficient suction can cause decorations to fall easily, leading to potential damage.
9
3
Share

Is Changan Suzuki a Domestic or Joint Venture Car?

Changan Suzuki is a joint venture car. It was the first Sino-Japanese joint venture automobile production enterprise in China. However, on August 23 this year, the Japanese automaker Suzuki announced that it would terminate its joint venture relationship with Changan Automobile and withdraw from the Chinese automobile market to focus on the Indian market. The following is an introduction to Changan Suzuki cars: 1. Chongqing Changan Suzuki Automobile Co., Ltd.: Changan Suzuki generally refers to Chongqing Changan Suzuki Automobile Co., Ltd., which was established in May 1993 and is a wholly-owned subsidiary of Changan Automobile. 2. Brand positioning: Changan Suzuki has always adhered to the firm and persistent belief in car manufacturing, meeting the diverse and personalized needs of users with a flexible and open attitude, and continuously creating surprises for users.
17
1
Share

How Long Does a Vehicle Need to Break In?

The break-in period for a new vehicle is generally 1,000-3,000 kilometers. Purpose of the break-in period: The break-in period for a new vehicle primarily allows all components to fully engage, frictionally adapt, and settle into their optimal positions. During this period, the vehicle's parts enhance their environmental adaptability, and initial contact between components smoothens out any surface irregularities. Precautions during the break-in period: Avoid full load. The vehicle's load during the break-in period should not exceed 75% of its rated capacity. Maintain smooth acceleration and avoid sudden throttle inputs. Since components are still adapting, excessive load or high speeds can intensify part stress, potentially causing damage rather than reducing surface roughness. Shift gears promptly while driving. Avoid prolonged use of a single gear—start in low gear and progressively shift up for gradual adaptation. Prevent scenarios like high RPMs in low gear or low RPMs in high gear to ensure even wear across the transmission's gears and shafts. Choose smooth roads to minimize vibration, impact, or emergency braking. Maintain controlled speeds, ideally between 50-80 km/h. Avoid long-distance trips. Extended operation during the break-in period increases engine wear. Do not change oil prematurely. Follow the manufacturer's recommended oil change schedule for the break-in period. Always warm up the engine before driving. Coolant temperature should reach at least 40°C. Warming up ensures proper lubrication, especially crucial for turbocharged models—allow at least one minute for adequate lubrication.
1
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.