What to Pay Attention to During the Probationary Period of a Driver's License

3 Answers
Helen
07/25/25 12:54am
There are many important considerations during the probationary period of a driver's license. Below are the key points to note during this period: 1. No driving of special vehicles during the probationary period: Probationary drivers are not allowed to drive buses, commercial passenger vehicles, police cars, fire trucks, ambulances, engineering rescue vehicles, or vehicles carrying explosives, flammable and explosive chemicals, toxic substances, radioactive materials, or other dangerous goods. Additionally, the driven vehicle must not tow a trailer. 2. No solo driving on highways during the probationary period: Probationary drivers cannot drive alone on highways and must be accompanied by a licensed driver with at least 3 years of driving experience in the front passenger seat. The accompanying driver should provide guidance. Failure to have a qualified accompanying driver or not meeting the requirements will result in a fine of 200 yuan. 3. Mandatory display of the probationary sign: During the probationary period, a standardized probationary sign issued by the traffic management department must be affixed or hung at the rear of the vehicle. 4. Accumulating 12 points will revoke the license: If a probationary driver accumulates 12 penalty points, their driving qualification for the probationary vehicle type will be revoked. If the revoked qualification is not for the highest permitted vehicle type, the highest permitted vehicle type driving qualification will also be revoked.
Was this review help?
4
2
Share
McLane
08/10/25 11:05am
I just got my driver's license and started the probation period, so driving safety is my top priority. The probation period usually lasts 12 months, and the law requires displaying a probation sign, which I’ve placed visibly on the rear window to avoid traffic police checks. Speed control is crucial—I keep it under 40 km/h in the city and absolutely avoid highways since driving alone on highways during probation is illegal. I’m extra careful about blind spots when parking and practice reverse parking multiple times in empty lots. I try to avoid driving in rain or at night, and always check my lights. If an accident happens, insurance might not cover it, leading to big losses, so I’d rather drive slow than fast. I maintain a calm mindset, avoid aggressive driving, and cultivate defensive habits like keeping a safe distance and wearing a seatbelt. Once the probation period is over, my skills will naturally improve.
Was this review help?
19
4
Share
Expand All
Iker
09/26/25 8:09am
During the probationary period, strictly adhere to traffic rules. Displaying the probationary sign is mandatory, don't be lazy. Don't overload the vehicle - the law prohibits probationary drivers from operating overcapacity vehicles. Zero tolerance for drunk driving, not a single drop of alcohol, getting caught means immediate license revocation. Exercise extreme caution on highways, preferably with an experienced driver accompanying you. Be very careful with the demerit point system - probationary drivers can only accumulate 11 points; reaching 12 points means license cancellation and retesting. I recommend familiarizing yourself thoroughly with the vehicle's dashboard and light controls to minimize accidents. Choose good weather conditions for safer driving, avoiding thunderstorms. Maintain a calm mindset without rushing; when encountering complex road conditions, pull over calmly and wait. Cultivating good habits during probation will build confidence after this period and prevent future problems.
Was this review help?
13
3
Share
Expand All
More Forum Discussions

What is the normal intake pressure for Peugeot 307?

The normal intake pressure range for Peugeot 307 is between 40-80KPA. Intake pressure refers to the average absolute pressure in front of the intake valve during the engine cylinder's intake process. The intake pressure sensor, abbreviated as MAP (Manifold Absolute Pressure Sensor), is connected to the intake manifold via a vacuum tube. It senses the vacuum changes in the intake manifold as the engine's speed and load vary, then converts the internal resistance changes of the sensor into voltage signals for the ECU to adjust fuel injection and ignition timing. The main parameters of the intake pipe affecting engine intake performance are summarized as follows: intake pipe inlet diameter, intake manifold diameter, intake manifold length, and plenum chamber volume. Intake pipe inlet diameter: Determines the total intake volume and is set based on the throttle diameter. Intake manifold diameter: Determines the intake volume per cylinder and is set based on the intake port entrance diameter. Intake manifold length: Affects the dynamic effect. In intake pipe optimization calculations, this is treated as a target parameter for optimization. Plenum chamber volume: Affects the pulsation (resonance) effect. An appropriate plenum chamber volume not only enhances charging efficiency by utilizing the pulsation effect but also maintains a relatively stable pressure environment in the plenum chamber, providing favorable conditions for leveraging dynamic effects while eliminating interference between cylinders and improving intake uniformity.
18
3
Share

Where is the tow hook on the Changan CS55?

The installation position of the tow hook on the Changan CS55 is under the vehicle's bumper. The tow hook, also known as a car tow hitch, is used for towing purposes and serves as the vehicle's towing and traction device. It consists of an installation bracket, a ball-type tow hook, and a towing power module. How to use the tow hook: Locate the towing hitch positions at the rear of the towing vehicle and the front of the towed vehicle; after removing the cover on the bumper, assemble the included hitch; install the towing tool; the towing vehicle should start in 1st gear to ensure sufficient torque for adequate traction. Installation method for the car tow hook: Use a screwdriver to gently pry open the small square module and remove the cover; screw the tow hook clockwise onto the small module until it can no longer turn, indicating successful installation. Towing precautions: If the towed vehicle has brake issues or towing is required on icy roads, a tow bar should be prioritized; ensure the tow hook is securely fastened and properly installed, double-checking its stability before towing; plan the route carefully; choose a towing route with less traffic, better road conditions, and a shorter distance; avoid hazardous sections such as crowded areas, logistics centers, commercial districts, underground parking lots, etc., to reduce the risk of secondary accidents.
13
2
Share

Is Honda Engine the Best in the World?

Honda engine is the best in the world. Here is an introduction to Honda engines: Since Honda was founded in 1948, Honda's engine technology has indeed been at the forefront of the global engine field, covering 1.5L, 1.8L, 1.0T, 1.5T, 2.0L displacements, among others. The most classic is the 1.5L engine, which can produce 131 horsepower. The most famous engine technology is the "VTEC system" (Variable Valve Timing and Lift Electronic Control System). The "Earth Dreams" technology configuration includes: VTEC variable valve lift, variable intake manifold, VCM variable cylinder management, turbocharging, and more, earning countless praises. Consumers often joke that it's "buying an engine and getting a car for free."
15
2
Share

How to Install One-Key Start for Motorcycles?

First, check the constant power. With the mechanical key in the off position, locate the wire in the original ignition switch that has power, then directly connect it to the constant power wire of the one-key start system. Turn the mechanical key to the NO position, ensuring the entire vehicle is powered on. The wire in the original ignition switch without power is the starter motor wire, which should be connected to the one-key start system.
17
4
Share

Is the Focus Dual Clutch Really That Bad?

Ford Focus dual-clutch transmissions have a relatively high failure rate. Introduction to the Focus: The Focus is a Ford A-segment family sedan. It is equipped with an inline four-cylinder Duratec-HE reverse-mounted aluminum alloy engine, which is cast entirely from aluminum alloy and features a reverse-mounted design. The maximum power output is 104 kW, and the maximum torque is 180 N·m. Introduction to the Focus Dual Clutch: The Focus dual-clutch transmission is sourced from Germany's Getrag. It is a dry dual-clutch transmission that is prone to overheating during frequent gear shifts. The prolonged semi-engaged state in stop-and-go traffic can lead to risks of overheating, jerking, and oil leakage.
13
3
Share

Which is more durable, the Tiguan L or the CR-V?

CR-V is more durable. Power: The CR-V is equipped with a 1.5T engine, delivering a maximum power of 193 horsepower and a maximum torque of 243 Nm, paired with a CVT transmission. The Tiguan L is equipped with a 2.0T engine, delivering a maximum power of 186 horsepower and a maximum torque of 320 Nm. Body Dimensions: The latest top-trim Tiguan L measures 4716(mm) in length, 1859(mm) in width, and 1677(mm) in height, with a wheelbase of 2791(mm). The latest top-trim Honda CR-V measures 4621(mm) in length, 1855(mm) in width, and 1689(mm) in height, with a wheelbase of 2660(mm).
15
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.