What to Pay Attention to During the First Maintenance?

1 Answers
LeJoseph
09/01/25 7:32am
Before the first maintenance, fully understand whether your car has any other faults or issues, and record them. When registering for the first maintenance, inform the 4S shop of these items that need to be checked. The precautions for maintenance are as follows: Pay attention to the maintenance time: When picking up the car, the staff at the 4S shop will inform the consumer of the first maintenance time and mileage; the vehicle's first maintenance time and mileage will also be indicated in the car's maintenance manual. You can proceed with the first maintenance according to the marked information. Pay attention to the oil used in the first maintenance: Since the vehicle is in the break-in period, various parts have not been fully broken in, and impurities may appear during use, affecting the performance of the oil. It is necessary to replace the oil in time during the first maintenance to avoid a decline in oil performance.
Was this review help?
8
3
Share
More Forum Discussions

Do I Need to Charge a Newly Replaced Battery?

Yes, a newly replaced battery needs to be charged, with the charging time maintained at around 10 hours. Its functions include: providing power to the starting system, ignition system, electronic fuel injection system, and vehicle electronics during engine startup. Methods to check for insufficient battery power: 1. The car horn sounds weaker; 2. The car struggles to start, indicating battery discharge; 3. The battery fault light turns on. Precautions for car battery charging: 1. Battery voltage below 10% of the rated voltage can lead to battery discharge; 2. Avoid water entering the battery during charging; 3. Connect directly to the battery for charging, avoiding removal to prevent data loss.
2
1
Share

How many cylinders does the Ford Territory engine have?

The Ford Territory is equipped with a four-cylinder engine, delivering a maximum horsepower of 140ps, a maximum power of 103kw, and a maximum torque of 225nm. The engine reaches its peak power at 4500rpm to 5200rpm and is paired with a 6-speed manual transmission. The Ford Territory is a 5-door, 5-seat compact SUV featuring a MacPherson independent front suspension and a multi-link independent rear suspension. Its body dimensions are: length 4580mm, width 1936mm, height 1674mm, with a wheelbase of 2716mm. The fuel tank capacity is 52 liters, and the trunk space ranges from 420 liters to 1120 liters. The vehicle weighs 1405kg.
16
4
Share

How to turn off the rear wiper of a Focus?

The method to turn off the rear wiper of a Focus is: 1. Open the driver's door and locate the wiper control lever; 2. Push the wiper control lever backward one gear. The function of the wiper is to remove raindrops and dust attached to the vehicle's windshield, improving the driver's visibility and increasing driving safety. The method to replace the wiper is: 1. Lift the metal wiper arm on the windshield, position it perpendicular to the windshield and keep it stable; 2. Press the tab, remove the old wiper blade, and separate it from the metal arm; 3. Insert the new wiper; 4. Hook it into place securely, then place the wiper back onto the windshield.
20
0
Share

Where are Ford engines produced?

Ford engines are produced in different locations depending on the situation: 1. Imported engines are produced at the UK engine factory; 2. Domestically produced engines are manufactured at the Chongqing engine factory. Ford's vehicle models include: Everest, Explorer, Territory, Kuga, Mondeo, etc. Taking the 2020 Everest as an example, its body dimensions are: 4892mm in length, 1862mm in width, 1837mm in height, with a wheelbase of 2850mm and a fuel tank capacity of 80 liters. The 2020 Everest features a MacPherson independent front suspension and a multi-link solid axle rear suspension with Watt's linkage and stabilizer bar. It is equipped with a 2.3T turbocharged engine, delivering a maximum horsepower of 275PS, a maximum power of 202kW, and a maximum torque of 455Nm, paired with a 10-speed automatic transmission.
20
2
Share

Does Throttle Body Cleaning Require ECU Reset?

Throttle body cleaning requires an ECU reset. Over time, carbon deposits accumulate in the throttle body, which can affect engine performance. The vehicle's engine ECU has strong adaptive learning capabilities. When the ECU detects carbon buildup in the throttle body, it switches to an alternative control logic to manage the carbon-fouled throttle. If the ECU isn't reset after cleaning, it will continue using the carbon-adapted control logic on the now-clean throttle body, resulting in increased fuel consumption. Regular cleaning of throttle body carbon deposits is recommended. Owners should always perform an ECU reset after each cleaning to prevent abnormal fuel consumption.
18
5
Share

What are the steps to remove the headlights of a Focus?

The steps to remove the headlights of a Focus are: 1. Open the front hood of the car and locate the bulb; 2. Pull out the bulb power cord and socket with the blue coil; 3. Release the handle of the bulb metal clip; 4. Press in the direction of the blue arrow, then push to the right to loosen the headlight clip and pull out the bulb. Taking the 2021 manual Fengyue Focus as an example, its body dimensions are: length 4647mm, width 1810mm, height 1468mm, wheelbase 2705mm, fuel tank capacity 53l, trunk capacity 511l, and body weight 1245kg.
18
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.