What to Pay Attention to After an Oil Change?

How to Avoid Crossing the Line During Curve Driving?

Solutions for frequently crossing the line during curve driving mainly include: 1. There are two entry directions, left entry and right entry: (1) For left entry, keep the vehicle close to the right line before turning the steering wheel to the left; (2) For right entry, conversely, keep the vehicle close to the left line before turning the steering wheel to the right. This accounts for the inner wheel difference to prevent the rear wheels from crossing the line during the turn. 2. During movement, keep the front of the car aligned with the edge line: (1) When turning left, align the front with the right line; (2) When turning right, align the front with the left line. When exiting the S-curve, there are two directions, left exit and right exit.

2

1

Share

Is Turbocharging Fuel-Efficient?

Turbocharging is indeed fuel-efficient. Below are the components of a turbocharger and its differences from a gas turbine: Turbocharger Components: A turbocharger includes essential bearing devices for normal operation, lubrication and cooling systems, sealing and insulation devices, as well as fixed components such as the compressor housing, intermediate housing, and turbine housing. Differences from a Gas Turbine: This unit does not have a combustion chamber or corresponding systems. The turbine operates using the exhaust energy of a reciprocating internal combustion engine, and the centrifugal compressor provides compressed air as the charge for the reciprocating internal combustion engine. In a turbocharger, the compressor impeller and turbine are mounted on the same rotating shaft, known as the rotor. Sealing elements and thrust washers are also placed on the same rotor shaft and rotate together.

13

3

Share

How Many Cylinders Does the Accord Engine Have?

The Accord is equipped with a four-cylinder engine. It utilizes three different engines in total: a 2.0-liter naturally aspirated engine, a low-power version 1.5-liter turbocharged engine, and a high-power version 1.5-liter turbocharged engine. In terms of suspension, the front suspension of this vehicle employs a MacPherson independent suspension, while the rear suspension uses a multi-link independent suspension. The Accord is a B-segment sedan produced by GAC Honda, with dimensions of 4930mm in length, 1845mm in width, and 1470mm in height, and a wheelbase of 2775mm. Regarding features, this car is equipped with an electric power steering system, collision mitigation braking system, emergency braking alert system, blind spot display system, electronic parking brake system, automatic parking system, and more.

7

3

Share

Why is there an odor when the car's external air circulation is turned on?

The reasons for odor when the air conditioning is turned on are as follows: 1. Accumulation of dust over prolonged use: After years of use, the indoor filter and internal copper plates of the air conditioning system can accumulate a certain amount of dust. When this accumulation reaches a certain level, it can produce an odor, which is then dispersed into the air when the air conditioning is turned on. 2. Long-term moisture inside the air conditioning system promotes mold growth: After cooling or heating, the indoor unit of the air conditioning system often retains moisture. If the air conditioning is turned off immediately without a drying or anti-mold function, this moisture remains inside, leading to mold growth over time and the natural production of a musty smell.

7

2

Share

2021 Sagitar Maintenance Schedule?

2021 Sagitar's first maintenance is performed at 5,000 kilometers, and subsequent maintenance is required every 10,000 kilometers after the initial 10,000 kilometers. Purpose of car maintenance: The purpose of car maintenance is to keep the vehicle clean and in normal technical condition, eliminate potential hazards, prevent failures, slow down the deterioration process, and extend the service life. First maintenance items: Check tire condition and adjust pressure; inspect lighting system operation; check windshield wiper and washer operation, inspect wiper blade wear, inspect exterior body and underbody protective components/pipes; inspect condition of various control belts; adjust clutch pedal height and travel; check and tighten chassis bolts; clean air filter element.

7

4

Share

How Does the 4S Shop Compensate When the New Car's Warning Light Comes On?

When the warning light of a new car comes on, the 4S shop handles the compensation as follows: 1. Compensation Plan One: The car owner can go to the 4S shop and have the maintenance personnel use a computer to read the car's fault code and inspect and repair the corresponding faulty part. Usually, new cars come with a warranty period, so the owner only needs to repair the faulty part. 2. Compensation Plan Two: If the new car frequently has the warning light coming on and the owner wants to request a replacement or refund, it depends on whether the owner's specific situation meets the conditions. According to the national New Three Guarantees Law, consumers have the right to request a replacement or refund. If the owner is dissatisfied with the 4S shop's handling method, they can file a complaint with the industrial and commercial department.

15

1

Share

What to Pay Attention to After an Oil Change?

How to Avoid Crossing the Line During Curve Driving?

Is Turbocharging Fuel-Efficient?

How Many Cylinders Does the Accord Engine Have?

Why is there an odor when the car's external air circulation is turned on?

2021 Sagitar Maintenance Schedule?

How Does the 4S Shop Compensate When the New Car's Warning Light Comes On?

What is the WEY P8?

How to Use the Prado Part-Time 4WD System?

What is the fuel consumption of the new Lexus ES200?

Does Braking in Neutral Gear Damage the Car?