What to Learn in Subject 2?

2 Answers
KalebLee
07/24/25 5:36pm
Subject 2 requires mastering the basic driving operation essentials and having the fundamental ability to control the vehicle. It involves proficiently learning the basic methods of driving on the field and internal roads, acquiring the capability to reasonably use vehicle control components and correctly control the spatial position of the vehicle movement. This includes accurately controlling the vehicle's driving position, speed, and route. Below is the relevant information for Subject 2: Typically, it takes about one month to learn Subject 2. Here are the details: 1. Introduction: Subject 2, also known as the field driving skill test, includes five mandatory test items for small cars C1 and C2: reversing into a garage, parallel parking, stopping and starting on a slope, turning at a right angle, and driving through curves (commonly known as S-turns). Some regions may include a sixth item, such as high-speed card collection. 2. Tips for automatic transmission Subject 2 test: Carefully control the accelerator and brake. Use the brake when deceleration is needed and the accelerator for acceleration, ensuring not to press either too abruptly. It is advisable to maintain a slow speed throughout for safety. During slope starts, be cautious to prevent the vehicle from rolling back; gradually release the brake only when you feel the vehicle has enough power to climb the slope.
Was this review help?
4
4
Share
SamuelFitz
08/11/25 9:43am
I just passed the second part of the driving test a few days ago, and I have a lot of feelings about it! The second part mainly focuses on field driving skills, including reverse parking, which requires repeated practice to find the right spot. There's also stopping and starting on a slope, where you must control the clutch to prevent rolling back. Parallel parking is another skill that needs to be practiced well, as it's quite practical in the city. The right-angle turn requires quick and precise steering. Finally, there's the curve driving, which is manageable as long as you maintain a steady speed. The instructor reminded me not to overlook the details, keep calm during the test, and practice simulations a few times to make it easier to pass. After actual driving, these skills come in handy when reversing and starting, making things easier and safer. I recommend beginners start practicing early and not wait until the last minute to feel nervous.
Was this review help?
4
2
Share
Expand All
More Forum Discussions

How to Turn on the Heating for Buick Air Conditioning?

Buick air conditioning heating activation method: 1. Start the car - use the one-button start for Buick models equipped with this feature, or use the car key for models without one-button start; 2. Press the AC button to activate the air conditioning system; 3. Use the fan speed adjustment button to set the desired airflow; 4. Rotate the red-blue temperature dial to the red zone to activate warm air. The Buick logo features a pattern resembling "three bullets" as its graphic trademark, serving as the division's emblem mounted on the vehicle's radiator grille. The Buick family crest is a red shield-shaped insignia with a diagonal pattern of silver and azure checkered bands running from the top left to bottom right corner.
6
0
Share

How many kilometers can a BMW run-flat tire travel after a puncture?

BMW run-flat tires can travel 80 kilometers after a puncture. Impact of a puncture: With run-flat tires, the vehicle can still travel 80 kilometers at a speed of 80 km per hour even when the tire is deflated. However, if the driver lacks experience in driving after a puncture, they might make incorrect driving maneuvers, such as sudden braking. This could lead to uncontrollable loss of vehicle control, as a puncture is a very serious safety incident, especially on highways. Purpose of equipping run-flat tires: Fitting a vehicle with run-flat tires largely addresses the concerning safety issues. Distance a run-flat tire can travel after a puncture: Generally, a run-flat tire can support the vehicle for about 250 kilometers after a puncture. However, in cases of significant damage (e.g., a large puncture from a sharp object) or poor road conditions, the travel distance may be reduced to just a few dozen kilometers.
3
4
Share

How to Play Bluetooth Music in a Buick Car?

Method for playing Bluetooth music in a Buick car: 1. Turn on the Bluetooth on both your phone and the Buick car, and set them to be visible to other devices; 2. Use your phone's Bluetooth to search for and find the name of the Buick car's Bluetooth, then pair them. The initial pairing password for the car is usually "000"; 3. Once paired successfully, you can use the car's Bluetooth to play music. Buick is an automobile brand under General Motors, founded in 1904. The models sold include sedans, SUVs, MPVs, and new energy vehicles. Buick's models include the VELITE 6, Excelle, Verano, Excelle GT, Envision, Regal, LaCrosse, Encore, Enclave, Buick GL6, and Buick GL8.
15
1
Share

How often should the coolant be replaced in a Magotan?

The coolant in a Magotan should be replaced every two years or 40,000 kilometers. This is just a reference interval. For commercial vehicles with higher mileage, the replacement interval should be shorter. Since driving conditions vary for each vehicle, the replacement should be based on actual usage. Check the coolant level regularly and top it up if it is insufficient. If you notice any suspended particles, sediment, or discoloration in the coolant, replace it immediately and clean the system. Coolant replacement method: Before completely replacing the coolant, conduct a thorough inspection to check for any leaks or cracks in the pipes, especially the five-way hose. The five-way hose is named for its five connection points to different parts of the vehicle. Coolant flows through this hose and is distributed to various parts of the car. If there is any coolant leakage in this area, replace the hose or reseal the connections as needed. Drain the old coolant and flush the channels with clean water. Add water to the coolant reservoir and let it circulate continuously through the engine cooling system. Start the engine and let it idle for 3 to 5 minutes to allow the water to circulate. Initially, the water draining out will have a faint pink color. Continue adding clean water until the water runs clear. Remember to remove the heater hose and drain the water from the heater core. After draining for about an hour, add the new coolant through the radiator hose to allow it to flow quickly into the radiator. Then, fill the coolant reservoir with another bottle of coolant until it is nearly full. Start the engine and let it run for about 10 minutes. As some air is expelled from the cooling system, the coolant level will drop. Top it up again until it reaches the "MAXT" mark on the reservoir.
20
5
Share

How to Remove Engine Sludge?

You can use a dedicated sludge cleaning oil. After draining all the engine oil, add the cleaning oil to the engine, let the engine idle for 15 minutes, and then drain the cleaning oil. Here is some extended information about the engine: 1. After prolonged use, a car's engine may develop sludge or internal carbon deposits. However, sludge is harmful to the engine as it can clog the oil passages, affecting the engine's lubrication. 2. The engine contains oil, which needs to be pumped by the oil pump to various parts of the engine that require lubrication. If the oil passages are clogged, the oil cannot reach these parts, which will accelerate engine wear.
17
2
Share

What are the hazards of high RPM and low speed for motorcycles?

The hazards of high gear and low speed include easy formation of carbon deposits inside the engine, severe wear on the engine and clutch. The following is expanded content: Formation of carbon deposits inside the engine: When carbon deposits reach a certain level, it can lead to difficulties in starting the vehicle, increased fuel consumption, decreased engine power, and acceleration failure. The engine computer will remember such driving habits, and the vehicle's acceleration will become sluggish in the future. Severe wear on the engine and clutch: Driving at high gear and low speed results in poor transmission ratio, making the engine prone to shaking. It is equivalent to transmission braking, and the clutch also bears enormous friction. Excessive friction can cause clutch slippage and accelerate wear. Therefore, high gear and low speed not only fails to save fuel but also has side effects.
7
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.