What to Know Before Learning to Drive

2 Answers
ZacharyDella
07/24/25 5:45am
Things to know before learning to drive: 1. You must be between 18 and 70 years old, physically and mentally healthy, with no disabilities; 2. The driving learning process follows the exam sequence: Subject 1, Subject 2, Subject 3, and Subject 4. After passing one subject, you proceed to the next. If you fail a subject, you must retake it. Things to pay attention to during the learning process: 1. When starting the car for the first time, follow the correct sequence and release the handbrake when beginning to drive; 2. Always fasten your seatbelt; 3. Don’t forget to engage the handbrake when parking; 4. Position your right foot correctly; 5. After parking, don’t forget to shift back to neutral or P gear.
Was this review help?
13
0
Share
OGriffin
08/11/25 1:27am
Before learning to drive, I thought about a lot of things. The most basic is traffic rules, especially the symbols and regulations in the traffic rule book, as these details are often tested in exams. It's also important to choose a good driving school, as the instructor's attitude directly affects how quickly you pick things up. A friend of mine chose one with a bad reputation and took a long time to get their license. Don’t overlook the costs—lesson fees and exam fees add up to a significant amount, so if you're on a tight budget, plan ahead to avoid impulsive decisions like I initially made. Mentally, you should also be prepared; feeling pressure while driving is normal—take it slow and prioritize safety above all else. Learn some basic car knowledge, like how to check tire pressure or battery condition, to avoid confusion when you get behind the wheel. In short, understanding these aspects thoroughly can make the learning process much smoother and help prevent accidents on the road.
Was this review help?
13
5
Share
Expand All
More Forum Discussions

What are the reasons why the BYD Qin's air conditioner only blows air but does not cool?

Reasons why the air conditioner only blows air but does not cool: 1. Lack of refrigerant: This leads to insufficient refrigerant in the air conditioning system pipeline, reduced pressure, and decreased heat absorption, resulting in the feeling of only blowing air without cooling. In this case, observe through the sight glass above the dryer. During normal operation of the air conditioner, if there are continuous slow bubbles in the sight glass, it indicates insufficient refrigerant. If obvious bubble flipping occurs, it means the refrigerant is severely insufficient. 2. Excessive refrigerant: There is a required proportion of refrigerant in the air conditioning system. If the proportion is too high, it will affect heat dissipation. Similarly, if too much cooling oil is added during maintenance, it will also reduce the heat dissipation of the refrigeration system. 3. Aging or loose belt: A loose drive belt of the car air conditioning compressor can cause slippage during operation, leading to reduced transmission efficiency, decreased compressor speed, and reduced refrigerant delivery, resulting in the air conditioner not cooling.
13
5
Share

What is the reason for sudden high idle speed when stepping on the brake?

The reason for sudden high idle speed when stepping on the brake is that the transmission downshifts, causing a momentary increase in torque, which is a normal phenomenon. The braking system consists of a vacuum booster pump, master brake cylinder, wheel brake cylinder, brake pads, and brake discs. The brake has the function of reducing vehicle speed, and the precautions for its use are as follows: 1. Slow down: Brake gently when following another vehicle. 2. Rainy days: Use emergency braking cautiously on rainy days. 3. Braking: Avoid using emergency braking on slopes and curves. The solutions for brake failure are as follows: 1. Pedal: Release the accelerator pedal. 2. Gear: Shift to manual mode and manually downshift from high gear to low gear. 3. Handbrake: When pulling the handbrake, press the release button and pull the handbrake continuously, but do not pull it to the locked position. 4. Parking gear: Shift into park after the vehicle comes to a stop.
8
0
Share

What is the normal idle speed for the Hongqi H5?

Here is an introduction about car idle speed: 1. Idle speed is an operating condition of a car, referring to the engine running in neutral gear. The engine speed during idle is called idle speed, which can be adjusted by changing the throttle opening size, etc. 2. Idle speed means the engine is "working without output." It refers to the engine running without load, only overcoming the internal friction resistance of its components, without outputting power externally. 3. The minimum speed required to maintain stable engine operation is called idle speed, which is one of the five basic operating conditions of an engine. For an engine with good performance, the idle speed is generally between 550-800 RPM. 4. Idle speed can be adjusted by changing the throttle opening size, idle fuel supply, etc. Generally, the optimal idle speed is the lowest speed within the idle range where the engine does not shake and has good acceleration performance.
16
5
Share

What is the battery model for the Ford Kuga car key?

The battery model for the Ford Kuga car key is CR2032. CR2032 is a lithium manganese dioxide battery, named according to the IEC standard. The naming convention is as follows: C - Indicates a chemical battery system with lithium metal as the negative electrode and manganese dioxide as the positive electrode. R - Indicates the battery is cylindrical in shape; if it were square, it would be denoted by F. 20 - Indicates the battery diameter is 20mm. 32 - Indicates the battery height is 3.2mm. The nominal voltage is 3.0V, the endpoint voltage is 2.0V, and the rated capacity ranges from 200-240mAh, varying by manufacturer. The shelf life of a CR2032 battery is typically 5 years. However, if the manufacturing quality or quality control is poor, the lifespan can be significantly reduced. Domestic first-tier brands can generally guarantee this lifespan. Under ideal conditions (sealed, room temperature, no moisture, etc.), the lifespan can be extended to 8 years or even 10 years. Generally, replacing a car key battery involves the following three steps: Step 1: Remove the mechanical key. Press the lock button on the side of the smart key to remove the mechanical key. Step 2: Open the battery cover. After removing the mechanical key, you will see a deep slot and a shallow slot at the top of the smart key. The deep slot is the keyhole, while the shallow slot is used to open the battery cover. Insert the mechanical key into the shallow slot and pry it open to reveal the coin cell battery. Gently remove the battery. Step 3: Replace the battery. Insert the new battery, reattach the battery cover, and reinsert the mechanical key. The battery replacement is now complete.
18
0
Share

Is the highway free on New Year's Day?

Highways are not free on New Year's Day. In 2020, the highway tolls on New Year's Day were charged according to the usual standards, and all vehicles entering the highway were required to pay the toll. According to the national implementation plan for exempting small passenger vehicles from tolls on major holidays, the free passage period applies to four national statutory holidays: Spring Festival, Qingming Festival, Labor Day, and National Day. The free highway periods for these holidays are as follows: 1. Spring Festival: from 00:00 on January 24 to 24:00 on February 8, totaling 16 days; 2. Qingming Festival: from 00:00 on April 4 to 24:00 on April 6, totaling 3 days; 3. Labor Day: from 00:00 on May 1 to 24:00 on May 5, totaling 5 days; 4. National Day: from 00:00 on October 1 to 24:00 on October 8, totaling 8 days.
19
1
Share

What engine does the Atenza have?

The Atenza is equipped with two engine options: 2.0L and 2.5L. The specific differences are as follows: 1. 2.0L version engine: The actual displacement is 1998ml, with 4 cylinders arranged in an L-formation, naturally aspirated intake, maximum power achieved at 6400 rpm, maximum torque achieved at 4000 rpm, direct injection fuel supply, maximum output power of 116 kW, maximum torque of 202 N·m, top speed of 212 km/h, and a combined fuel consumption of 6.4L per 100 km. 2. 2.5L version engine: The actual displacement is 2488ml, with 4 cylinders arranged in an L-formation, naturally aspirated intake, compression ratio of 13, maximum power achieved at 6100 rpm, maximum torque achieved at 3250 rpm, direct injection fuel supply, maximum output power of 141 kW, maximum torque of 252 N·m, top speed of 226 km/h, and a combined fuel consumption of 7L per 100 km.
1
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.