What to do with the ETC when the vehicle is sold?

Where is the coolant in Honda CR-V?

The coolant reservoir for Honda CR-V is located on the right side inside the engine compartment. Comprehensive Inspection: First, conduct a thorough inspection to check for any cracks or signs of leakage in the pipes, with special attention to the five-way pipe (named for its five connections to different parts). The coolant must flow through the five-way pipe before being distributed to various parts of the car to function effectively. Flushing the Fluid Channels: Drain the old coolant and flush the fluid channels with clean water. Add clean water to the coolant reservoir, then continue to pour water into the reservoir, allowing it to flow continuously through the engine cooling system. Start the engine and let it idle for 3 to 5 minutes to circulate the water. Initially, the water coming out of the reservoir will have a faint pink color. Keep adding clean water until the water coming out is clear. Don’t forget to remove the heater hose and drain the water from the heater core.

19

3

Share

How Many Kilometers Should GAC Honda Spark Plugs Be Replaced?

GAC Honda uses NGK iridium-platinum spark plugs with a replacement interval of 60,000-80,000 kilometers. Under normal maintenance conditions, spark plugs should be replaced when the vehicle has traveled 40,000 to 60,000 kilometers. However, this may vary depending on the brand and engine type. It is recommended to follow the instructions in the owner's manual. You can refer to the following maintenance standards for replacement: platinum spark plugs should be replaced at 40,000 kilometers, ordinary nickel alloy spark plugs at 20,000 kilometers, and iridium spark plugs at 60,000-80,000 kilometers. Spark plugs are crucial components in a gasoline engine's ignition system. They introduce high voltage into the combustion chamber and generate sparks by jumping across the electrode gap, thereby igniting the combustible air-fuel mixture in the cylinder. The main types of spark plugs include: standard spark plugs, insulator projection spark plugs, electrode spark plugs, seat spark plugs, pole spark plugs, and surface gap spark plugs.

17

3

Share

Is it a violation to change lanes by slightly crossing a solid line?

This behavior constitutes a violation of prohibitory marking instructions and is considered illegal, resulting in penalty points. Changing lanes by crossing a solid line: The most common violation of prohibitory marking instructions is changing lanes by crossing a solid line. Single or double yellow solid lines and white solid lines all fall under prohibitory markings. During driving, whether crossing or going beyond these lines is considered illegal. Relevant regulations: Operating a motor vehicle in violation of prohibitory signs or marking instructions; operating a motor vehicle by not following the rules for overtaking or yielding, or driving in the opposite direction; operating a motor vehicle in violation of regulations for towing a trailer; all are illegal acts. Additional information: When driving on the road, if encountering special vehicles such as fire trucks performing tasks, crossing a solid line to yield to these special vehicles will not be penalized. Even if captured as a violation, the vehicle owner can appeal to the traffic department after receiving the ticket, explaining the situation at the time. The relevant department will review based on the footage of the incident and the special vehicle's route that day. If approved, the penalty can be revoked.

5

Share

How long does it take to get the metal license plate when a 4S dealership handles new car registration?

When a 4S dealership handles new car registration from temporary license to metal license plate installation, it usually takes within half a month. Because the temporary license is valid for half a month, generally you can get the license plate immediately after the vehicle inspection, except for customized license plates, which may take about another week. Documents required for registration: Original ID card, ID card copy (not necessary, as there are copying services at the tax bureau and vehicle management office). Original vehicle certificate; Compulsory insurance policy (commercial insurance can be purchased after registration); Purchase invoice; Purchase qualification certificate; Original registration form, etc. Registration time: It takes up to two days to complete the relevant procedures at the counter. That is to say, self-handled new car registration with complete documents can be completed in three days. Generally, after the procedures are completed, the license plate needs to be manufactured, and it cannot be obtained on the same day. It takes about 5 working days to collect the license plate. The specific time is subject to the local vehicle management office.

9

5

Share

What Are the Reasons Why a Car Won't Start and the Key Can't Be Pulled Out?

When a car won't start and the key can't be pulled out, it is usually due to fuel or electrical system issues. First, check if the fuel level is insufficient. Without gasoline, the car's power source, the engine won't start. If the car won't start due to lack of fuel, you can seek help from nearby car owners, request fuel assistance, or arrange for towing to a gas station as emergency measures. Below are the specific reasons why a car won't start: 1. Insufficient fuel: Without gasoline, the car's power source, the engine won't start. If this is the case, seek help from nearby car owners, request fuel assistance, or arrange for towing to a gas station as emergency measures. 2. Incorrect gear position: For automatic transmission cars, the correct gear positions for starting are usually P (Park) or N (Neutral). Placing the gear in R (Reverse) or other positions not only prevents the car from starting but also poses safety risks. 3. Electrical issues: Common faults that cause a car to not start include blown fuses, open ignition coils, broken low-voltage circuits, detached central ignition wires, distributor leakage, or damaged spark plugs.

16

2

Share

Can I get a C1 driver's license if I can't see with one eye?

You can obtain a C1 motor vehicle driver's license. Applicants for a motor vehicle driver's license only need to have vision of at least 5.0 in one eye and a horizontal field of vision of 150 degrees to apply for a motor vehicle driver's license. Corrected vision is allowed, and wearing glasses is also permitted. Here is some additional information: 1. Application requirements: Applicants must be between 18 and 70 years old, with vision of at least 5.0, which can be achieved through correction or wearing glasses. Color blindness is not allowed. Applicants must be able to clearly distinguish sounds and may wear hearing aids. Each hand must have at least three fingers. The motor function of both lower limbs must be normal, and there should be no motor dysfunction in the neck or torso. 2. Situations where application is not allowed: Suffering from heart disease, epilepsy, mental illness, dementia, or other diseases that hinder safe driving. Long-term use or injection of drugs, or failure to quit dependence on psychotropic drugs. Having a driver's license revoked within the past two years. Having a motor vehicle driver's license legally revoked within the past three years, or having a driver's license revoked due to a traffic accident.

10

1

Share

What to do with the ETC when the vehicle is sold?

Where is the coolant in Honda CR-V?

How Many Kilometers Should GAC Honda Spark Plugs Be Replaced?

Is it a violation to change lanes by slightly crossing a solid line?

How long does it take to get the metal license plate when a 4S dealership handles new car registration?

What Are the Reasons Why a Car Won't Start and the Key Can't Be Pulled Out?

Can I get a C1 driver's license if I can't see with one eye?

Is it recommended to get insurance for the first year of a new car?

Can a motorcycle carry passengers after installing side cases?

Can the 12123 App Replace a Physical Driver's License on the Road?

What is the speed limit within the construction site?