What to Do with the Car Refrigerator After Parking and Turning Off the Engine?

2 Answers
DiVera
07/29/25 5:00am
If connected to the ignition switch, it will power off after removing the key; if connected to the parking lights or hazard lights position, the refrigerator will continue to work after removing the key. Car mobile power supplies are generally 30000mAh, and the power consumption of car refrigerators is 35-50W, which is enough for 6-8 hours of use. Bring it to a place with a 220V AC power source, prepare a power adapter, and the car refrigerator can be used normally with 220V power support.
Was this review help?
12
2
Share
BrooklynLynn
08/12/25 8:38am
After parking and turning off the engine, the car fridge stops working immediately. I often encounter this issue when driving with food, as the cooling effect drops instantly, allowing bacteria to multiply rapidly, causing meat and dairy products to spoil quickly. My routine is to immediately open the trunk, transfer all perishable items from the fridge into insulated bags, add ice packs to maintain coldness, and rush home to store them in the household refrigerator. Any delay leads to food spoilage, which is not only a health hazard but also a waste of money. I recommend planning the quantity needed before trips, avoiding excess fresh produce, and keeping extra cooling bags handy for unexpected situations.
Was this review help?
9
5
Share
Expand All
More Forum Discussions

What is the function of engine oil in a car?

Engine oil serves the following purposes: 1. Lubrication to reduce wear: There is rapid relative sliding between the piston and cylinder, as well as between the main shaft and bearing bush in the engine, which can easily cause wear. High-quality engine oil can form a sufficiently thick oil film between these two sliding surfaces, separating the relatively sliding parts to achieve the goal of reducing wear. 2. Cooling: Engine oil can carry heat back to the oil tank and then dissipate it into the air, assisting the radiator in cooling the engine. 3. Cleaning: Good engine oil can circulate carbon deposits, sludge, and worn metal particles from engine parts back to the oil tank, flushing away dirt generated on the working surfaces of the parts through the flow of the lubricating oil. During normal use, engine oil will also have a certain consumption rate, so it is necessary to regularly check the oil level and its degree of contamination.
5
4
Share

What is the remote control matching method for the Volkswagen Santana Vista?

The remote control matching method for the Volkswagen Santana Vista is: Close all doors, press the central locking button on the driver's side to lock all four doors, insert the key into the ignition switch and turn it on and off three times, then remove it. The central locking system will activate once, and then press the lock button on the remote control. If the central locking system activates again, it indicates successful matching. The Santana Vista is a model under SAIC Volkswagen's Santana brand, with body dimensions of 4687mm in length, 1700mm in width, and 1450mm in height, and a wheelbase of 2656mm. The Santana Vista inherits the classic and elegant style of the Santana brand while perfectly integrating modern design elements, such as the chrome double-bar radiator grille, stylish dashboard, light-colored wood trim, beige interior theme, and leather seats, all of which exude a refined and elegant temperament.
18
1
Share

What is the long-distance fuel consumption of the Geely Jiaji PHEV?

Geely Jiaji is equipped with a plug-in hybrid system consisting of a 1.5T engine + electric motor + battery pack, with a comprehensive maximum horsepower of 258 hp and a peak torque of 385 N·m. The battery pack capacity is 11.3kWh. It is paired with a 7-speed wet dual-clutch transmission, and the MIIT comprehensive fuel consumption is only 1.6L/100km. Relevant information about fuel consumption is as follows: 1. Introduction: Fuel consumption generally refers to constant-speed fuel consumption, which is the vehicle's fuel consumption per 100 kilometers obtained in the constant-speed driving fuel consumption test specified by national standards for certain types of vehicles. 2. Testing method: The test can be conducted on the road or on a chassis dynamometer, and then the fuel consumption per 100 kilometers is obtained through the 'flow meter method' or 'carbon balance method'.
15
2
Share

How to Remove Rusted Shaft and Sleeve?

Methods for removing rusted shafts and sleeves: 1. Tapping Method: Use tools to tap and vibrate the bearing out. When applying this method, pay attention to accurate tapping positions and moderate force. 2. Gas Cutting Method: This method causes destructive damage to the bearing. If the technique is not proficient, it may harm the shaft, so caution is required. 3. Pulling Method: Use a specialized removal tool, such as a hub bearing puller, which can be directly fixed to the hub, making the process simple, convenient, time-saving, and labor-saving. The sleeve is a cylindrical mechanical part fitted over the shaft and is a component of a sliding bearing. The sleeve and bearing housing adopt an interference fit, while the sleeve and shaft adopt a clearance fit. The end contacts components such as gears and bearings with compressive stress. Sometimes, to ensure the shaft can fit with standard parts like sealing rings and allow middle components to pass through the shaft end, the sleeve is designed to fit with the sealing ring, and the shaft can be made thinner to ensure the components can pass through.
17
2
Share

What is the horsepower of the Yuchai 4108?

The Yuchai 4108 engine, with the Yuchai code YC4D, is available in 120 horsepower, 130 horsepower, and 140 horsepower variants. Below are some details about the Yuchai 4108d: 1. Detail one: The four-cylinder engine mainly consists of components such as the cylinder block, crankcase, cylinder head, and cylinder gasket. The basic principle of a four-cylinder engine is to convert the thermal energy of gasoline (diesel) into mechanical energy by pushing the piston to do work through the expansion of gas combustion in a sealed cylinder. 2. Detail two: The engine's power is not equal to the vehicle's power, as there are intermediate losses in mechanical transmission. Additionally, designs that increase the thickness and weight of the vehicle body for safety considerations can also lead to a loss of engine power. Therefore, vehicles equipped with small-displacement engines are not necessarily slower or inferior in performance compared to those with high-power engines.
19
3
Share

How to Confirm Engine Valve Noise?

Methods to confirm engine valve noise: 1. When the engine is idling, if there is a solid and crisp sound on the camshaft side that is more pronounced than the valve tappet noise and does not disappear during the "ignition cut-off" test, you can increase the engine speed to medium speed for testing. If the noise weakens or disappears, it may be a tappet noise; 2. You can remove the valve cover, make a wire hook, and test each tappet by hooking the adjusting bolt on the tappet. When hooking a certain tappet, if the noise weakens or disappears, it can be determined that the noise is coming from that tappet. Tappet noise is a light and crisp sound, which is a rhythmic intermittent noise, and the noise source is on the camshaft side; For side-valve engines, removing the valve cover makes the noise more obvious.
12
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.