What to Do with ETC After Vehicle Transfer and License Plate Change?

What is the optimal position for adjusting car side mirrors?

Left side mirror should allow visibility of both front and rear door handles of the vehicle, with the right side mirror adjusted to the same position for optimal setup. Below are key functions of side mirrors: 1. Information reception: Enables drivers to directly obtain external information about rear, lateral and lower areas of the vehicle while seated. 2. Distance range: Side mirrors have field-of-view considerations, referring to the reflective coverage area. The industry recognizes three essential factors: the distance between driver's eyes and mirror, mirror size, and mirror's curvature radius. 3. Mirror reflection: When distance and size remain constant, smaller curvature radius yields wider reflective field of view.

19

3

Share

Does Buying a Used Car Come with License Plates?

Generally, buying a used car does not include the license plates. Below are the methods for transferring a vehicle to a family member: 1. Transaction Method: You need to go to the motor vehicle registration service station to complete the relevant procedures. The processing location can be the vehicle management office affiliated with your ID card or the vehicle management office affiliated with the transferor's ID card. The transferor does not have to be present in person. 2. Gift Method: You need to go to a notary office to complete a gift notarization. The transfer registration is processed with the gift declaration and notarization certificate. However, the notarization fee is charged as a percentage of the value of the gifted vehicle, which is generally higher than the cost of the transaction method.

9

1

Share

Does Engine Overheating Necessitate a Major Overhaul?

Whether an engine requires a major overhaul after overheating depends on the specific situation. Generally, a major overhaul is not necessary. However, if the engine continues to be driven after the coolant temperature warning light comes on, or even after white smoke appears, a major overhaul might be required. Here is some relevant information about engines: 1. Introduction: A car engine is the device that provides power to the vehicle, acting as the heart of the car. It determines the vehicle's power, fuel efficiency, stability, and environmental friendliness. 2. Classification: Depending on the power source, car engines can be categorized into diesel engines, gasoline engines, electric vehicle motors, and hybrid engines, among others.

11

1

Share

What is the maximum ground clearance of the Audi A8 air suspension?

The maximum ground clearance of the Audi A8 air suspension is 145 mm. The minimum ground clearance of the Audi A8 refers to the distance between the lowest point (excluding the wheels) and the supporting plane, which indicates the vehicle's ability to pass over obstacles such as rocks and tree stumps without collision. A higher ground clearance for the Audi A8 improves its off-road capability, but if the ground clearance is too high, the stability at high speeds may decrease. The Audi A8L is a luxury car produced by Volkswagen AG in Germany and is the top-tier model in the Audi lineup. It features an all-aluminum body, a top speed of 250 km/h, and is positioned to compete with the Mercedes S600 and BMW 7 Series. The dimensions of the Audi A8 are 5302 mm in length, 1945 mm in width, and 1483 mm in height, with a wheelbase of 3128 mm. Generally, the ground clearance of sedans ranges between 110 mm and 150 mm, while SUVs have a ground clearance between 200 mm and 250 mm. However, the ground clearance of the Audi A8 is not static—it also depends on the load condition. Therefore, changes in the Audi A8's load must be considered when evaluating ground clearance. When selecting a vehicle, ground clearance can be one of the reference factors. The choice should depend on the vehicle's intended use and the road conditions. For well-paved urban roads, a vehicle with lower ground clearance can enhance stability and comfort. For frequent travel to rural areas or driving on rough terrain, a higher ground clearance may be preferable to avoid scraping or damaging the undercarriage.

11

0

Share

What is the air tube connection method for air suspension seats?

Air suspension seats have two air tubes, and only one needs to be connected. One tube is for air intake, and the other is for exhaust, distinguished by color. Generally, the black tube is for intake, and the white tube is for exhaust. Below are the specific details about air suspension seats: 1. Air suspension seats, also known as air-suspended damping seats, allow the driver to adjust the seat to the most comfortable air pressure position (i.e., the damping balance point) after inflating the internal airbag, providing excellent smoothness. These seats typically feature basic damping and height adjustment functions. Higher-end models may also offer seat firmness adjustment, multi-level backrest and lumbar support adjustment, electric heating, and seat ventilation, creating the most comfortable and refreshing driving environment for the driver. 2. Maintenance and care for air suspension seats: When the vehicle reaches every 10,000 kilometers, check whether the bolts and nuts on the seat are loose and tighten them if necessary. The adjustment mechanism should be cleaned regularly, and lithium-based grease should be applied to the sliding grooves. Inspect the air valves and nozzles for detachment or leaks. The seat consists of three parts: the damping system, lifting mechanism, and seat body, connected by bolts. Any damaged part can be repaired at a service station. Wear-prone components such as the adjuster cover, handle, side guard plate, and sliding rail adjustment cable can also be serviced at a service station. Frequent air hissing sounds during use are normal, as the damping system intakes and exhausts air to ensure proper seat operation.

4

1

Share

What is the difference between CD and CF engine oils?

CD and CF engine oils differ in terms of application and performance. In terms of application: CD-grade oil is used for ordinary turbocharged diesel engines or light-duty small trucks equipped with diesel engines; CF-grade oil is designed for high-speed diesel engines with heavy-duty intercooled turbocharging or marine diesel engines. In terms of performance, CD-grade oil has an engine strengthening coefficient of 50-80, while CF-grade oil has an engine strengthening coefficient above 80. Below are detailed introductions about engine oil: 1. Function: Engine oil, also known as engine lubricant, serves to lubricate and reduce wear in the engine, assist in cooling, seal against leaks, prevent rust and corrosion, and act as a shock absorber. It is often referred to as the 'blood' of a car. The engine is the heart of a vehicle, containing many metal surfaces that move against each other. These components operate at high speeds, in harsh environments, and can reach temperatures between 400°C and 600°C. Under such severe conditions, only qualified lubricating oil can reduce wear on engine parts and extend their service life. 2. Classification: Engine oils are categorized into three types based on their source: conventional mineral oil, synthetic oil, and nano-ceramic oil. Synthetic oil offers higher lubricity, lower friction resistance, better resistance to oxidation, and stronger cleaning properties compared to mineral oil. Its drawbacks include slightly poorer low-temperature fluidity and heat resistance than mineral oil. Nano-ceramic oil is formulated by adding nano-ceramic additives and other compounds to base oil, and it can be widely used in the lubrication systems of vehicle internal combustion engines. The more advanced the performance, the higher the corresponding price.

2

0

Share

What to Do with ETC After Vehicle Transfer and License Plate Change?

What is the optimal position for adjusting car side mirrors?

Does Buying a Used Car Come with License Plates?

Does Engine Overheating Necessitate a Major Overhaul?

What is the maximum ground clearance of the Audi A8 air suspension?

What is the air tube connection method for air suspension seats?

What is the difference between CD and CF engine oils?

Where is the tire pressure monitoring in the Civic?

What are the differences between China 6 and China 5 standards?

Where is the spare tire of BYD Tang located?

How to Reset the Tire Pressure Monitoring Light on a Volkswagen?