What to Do When Your Learner's Driving License Expires?

Where is the Chery Tiggo produced?

Chery Tiggo is a car produced in China, specifically in Wuhu, Anhui Province, China. In addition to Wuhu as the main production base, there is also a branch factory in Dalian Development Zone. Tiggo dimensions: Although the chassis is derived from a B-segment car, the Tiggo does not pursue a large body size. The total length of the Tiggo is 4285mm, with a wheelbase of 2510mm, which is about 100mm shorter than the Outlander, CR-V, and Tucson. This design primarily aims to highlight the car's "On-Road" characteristics and highway driving performance. As a result, the Tiggo's minimum turning diameter is only 11m, comparable to that of the Chery Cowin. Tiggo safety design: Designed with reference to SUV safety standards, the Tiggo's active and passive safety performance surpasses that of ordinary sedans. Features include ABS+EBD, four-wheel large-diameter disc brakes, a prominent LED high-mounted stop lamp, and dual airbags, setting a new concept in car safety.

18

1

Share

What are the reasons for the high fuel consumption of the Passat B5?

Passat B5 has high fuel consumption for the following reasons: Low fuel quality: When the fuel quality added to the car is too low, the fuel and mixed gas cannot fully burn in the engine, resulting in partial fuel waste and increased fuel consumption. Adding high-quality fuel can reduce fuel consumption to a certain extent. Aggressive driving: When the driver drives too aggressively, the engine speed tends to be relatively high, which can easily cause the car engine to operate under overload, leading to high fuel consumption. It is necessary to change driving habits, drive gently, learn to brake in advance, and start slowly. Severe engine carbon deposits: When engine carbon deposits are too severe, fuel cannot be transported normally, and the car will experience increased fuel consumption and weakened power. It is necessary to clean the engine carbon deposits in time. Excessive vehicle weight: When the car's weight is too high, it increases the burden on the engine, leading to high fuel consumption. It is necessary to reduce the car's weight.

2

4

Share

What engine does the Verna RV use?

Verna RV is equipped with two naturally aspirated engines: a 1.4L and a 1.6L. This model offers two powertrain options. The 1.4L engine delivers a maximum power of 73.3 kW and a maximum torque of 132.4 Nm, while the 1.6L engine produces a maximum power of 90.2 kW and a maximum torque of 150.7 Nm. In terms of the transmission system, the engines are paired with either a 6-speed manual transmission or a 6-speed automatic transmission. The Verna RV measures 4190 mm in length, 1728 mm in width, and 1460 mm in height. Building upon the Fluidic Sculpture 2.0 design language, the Verna RV features a Keen Edged exterior design, including a large hexagonal grille, upward-slanting headlights, dual-tone alloy wheels, a fastback-style side profile, and a ducktail rear spoiler, exuding a sense of fashion and vitality.

4

0

Share

What is the wheelbase of the JAC Refine M3?

JAC Refine M3 has a wheelbase of 3110mm. Below is additional information: JAC Refine M3 body dimensions: The dimensions are 5075mm in length, 1765mm in width, 1900mm in height, with a wheelbase of 3110mm. JAC Refine M3 introduction: In terms of power, the Refine M3 is equipped with three engines across its lineup: a 1.6L naturally aspirated engine, a 1.8L naturally aspirated engine, and a 1.5L turbocharged engine. In terms of appearance, the JAC Refine M3 features a low-key and elegant overall design, suitable for various business activities. The front face adopts a classic three-section design with well-proportioned upper and lower details, while the side feature lines run through the front face, enhancing the overall sense of the body. In terms of safety, the JAC Refine M3 is equipped with passive safety features such as a collapsible energy-absorbing zone in the front, a collapsible energy-absorbing steering column, and door anti-collision beams, as well as active safety configurations.

18

0

Share

What grade of gasoline should a BMW X5 use?

BMW X5 should use 95-octane gasoline, as recommended in the vehicle's official user manual. In addition to checking the appropriate gasoline grade in the user manual, BMW X5 owners can also find this information on the fuel tank cap, which will be clearly marked. Generally, the gasoline grade can also be determined based on the engine's compression ratio. Vehicles with an engine compression ratio between 8.6-9.9 should use 92-octane gasoline, while those with a compression ratio between 10.0-11.5 should use 95-octane gasoline. If the compression ratio is higher, 98-octane gasoline is recommended. However, with the use of new technologies, the gasoline grade cannot be solely determined by the compression ratio, as high-compression engines can also be tuned to use lower-octane gasoline. This is because factors such as ignition timing, turbocharging technology, and Atkinson cycle technology also play a role. Generally, the higher the gasoline grade, the higher the octane rating and the better the anti-knock performance. 92-octane gasoline contains 92% isooctane and 8% n-heptane, while 95-octane gasoline contains 95% isooctane and 5% n-heptane. If a BMW X5 occasionally uses the wrong gasoline grade, simply switching back to the correct grade after use is sufficient. However, long-term use of the wrong gasoline grade can have the following effects: For vehicles recommended to use low-octane gasoline, using a higher-octane grade will not cause damage, but the increased octane rating can alter the fuel's ignition point, leading to delayed combustion in the engine. This reduces both the engine's power output and thermal efficiency, resulting in poorer performance. For vehicles recommended to use high-octane gasoline, using a lower-octane grade can cause engine knocking. The significantly lower octane rating reduces the fuel's ignition point, causing premature ignition during the compression stroke. If combustion occurs before the spark plug fires, resistance is created during the upward stroke. This resistance makes the engine run very unstably. Mild knocking only increases noise without obvious engine damage, but severe knocking indicates serious engine conditions. The vibrations not only affect driving stability but also cause abnormal wear on pistons and cylinders, potentially leading to cylinder scoring in severe cases.

4

0

Share

Can I use 95 gasoline if 92 is not available?

It is acceptable to occasionally use 95 gasoline when 92 is unavailable, as gasoline is a mixture and the composition of different grades is quite similar. However, it is not recommended to use 95 gasoline for a long time. The octane number of 95 gasoline is higher than that of 92, which may cause engine damage in severe cases. The grade of gasoline is an indicator of anti-knock performance, which is basically unrelated to cleanliness, power, or combustion value. The higher the gasoline grade, the stronger its ability to resist engine knocking. The difference between 92 and 95 is that 95 is more resistant to knocking than 92. It is also advisable not to mix different grades of gasoline. Short-term mixing will not cause significant harm to the car, but the hazards of long-term mixing should not be ignored. Mixing different grades of gasoline for a long time will affect the service life of the car's ignition system, fuel injectors, and spark plugs, leading to an earlier need for major repairs. The differences between 92 and 95 gasoline are as follows: Different octane numbers: 92 gasoline: Contains 92% isooctane and 8% n-heptane. 95 gasoline: Contains 95% isooctane and 3% n-heptane. Different gasoline quality levels: The grade of gasoline represents its octane number. A higher grade indicates a higher octane number, which means better anti-knock performance. This results in smoother engine operation, reduced wear on the car, and better protection for the engine. Different octane numbers lead to different anti-knock performances. Gasoline is a mixture produced by adding a certain amount of anti-knock agents to the same base gasoline, resulting in gasoline with different anti-knock properties. Different gasoline components, such as straight-run gasoline components, catalytic cracking gasoline components, and catalytic reforming gasoline components obtained from petroleum refining, are refined and blended with high-octane components, primarily used as fuel for automotive spark-ignition internal combustion engines. The chemical compositions of these two grades of gasoline are quite similar, but 95 gasoline has higher fuel efficiency and provides more power for the car. Generally, naturally aspirated cars use 92 gasoline, while turbocharged cars use 95 gasoline.

5

3

Share

What to Do When Your Learner's Driving License Expires?

Where is the Chery Tiggo produced?

What are the reasons for the high fuel consumption of the Passat B5?

What engine does the Verna RV use?

What is the wheelbase of the JAC Refine M3?

What grade of gasoline should a BMW X5 use?

Can I use 95 gasoline if 92 is not available?

Is the rear suspension of the Swift an independent suspension?

Should the Reiz use 92 or 95 octane gasoline?

What is the Nissan Sylphy Honor Edition?

Where is the cabin air filter located in the Changan Raeton?