What to Do When Your ID Card Expires During the Driver's License Examination Process?

2 Answers
DelaneyLee
07/24/25 2:42pm
If your ID card expires during the driver's license examination process, the solution is to apply for a temporary ID card. If you urgently need to use a resident ID card, you can apply for a temporary one. When a citizen loses their resident ID card, they should immediately report it to the public security authority where their household registration is located and complete the necessary procedures to apply for a replacement. The full name of a driver's license is the motor vehicle driving license, also known as a 'driver's license.' It is a certificate required by law for individuals who drive motor vehicles. In China, the definition of a driver's license is: a motor vehicle driving license is a legal document issued by the administrative authorities to individuals who are legally allowed to learn to drive motor vehicles, have studied and mastered traffic regulations and driving skills, and have passed the relevant examinations, permitting them to drive certain types of motor vehicles.
Was this review help?
14
0
Share
MacLeah
08/11/25 8:24am
It can indeed be troublesome when your ID card expires during the driver's license exam process, but I've helped others handle this before, so let me briefly explain the steps. First, you need to visit the local police station in your registered residence to apply for a renewal, bringing your old ID card and household registration booklet. Usually, you can get a temporary certificate on the spot for immediate use. Then, promptly inform your driving school or the test center about the situation—your exam might be postponed by a few days. Once you receive your new ID card, simply reschedule the exam. The whole process isn't difficult, so don't worry about delays; I've seen many people successfully manage it. The key is to act early and avoid waiting until the exam day to address the issue. Remember, temporary certificates have a short validity period, so confirm with your driving school that it's acceptable for exam use beforehand. Since the ID card is a core document, once updated, all subsequent steps in your driving lessons will proceed smoothly. In summary, maintain communication, prioritize updating your documents, and ensure your exam isn't delayed.
Was this review help?
12
5
Share
Expand All
More Forum Discussions

How many cylinders does the Honda Envix engine have?

Honda Envix engine has three cylinders. Here is the extended content: Lifespan of three-cylinder and four-cylinder engines: Regarding the lifespan issue, it needs to be clarified that the crankshaft connecting rod mechanism of an engine applies very complex variable forces to the crankshaft during operation, causing the engine to vibrate. This has nothing to do with how many cylinders the engine has. However, the inline four-cylinder engine, because cylinders 1 and 4, and cylinders 2 and 3 move up and down together, to some extent suppresses this vibration, but it still exists. Therefore, four-cylinder engines also incorporate balance shafts. The three cylinders of a three-cylinder engine cannot move up and down together, so the vibration cannot be suppressed and can only be directly countered with balance shafts. Moreover, if you have actually test-driven a three-cylinder car, without being told it's a three-cylinder, you wouldn't notice it's a three-cylinder because you really wouldn't feel particularly obvious vibrations. At most, it shakes a bit more at the moment of startup. Therefore, three-cylinder engines can last as long as the car itself, just like four-cylinder engines. Power comparison between three-cylinder and four-cylinder engines: If comparing power, then four-cylinder engines have to give way to three-cylinder engines, because four-cylinder models have a wider range of applications, while three-cylinder engines are usually used in low-end cars. Moreover, it's only fair to compare three-cylinder engines with turbocharged (T) four-cylinder engines. Otherwise, with one less cylinder, a turbocharged three-cylinder engine would definitely be no match for a turbocharged four-cylinder engine.
6
4
Share

What are the three filters in an engine?

Automotive three filters refer to the air filter, fuel filter, and oil filter. The specific introductions are as follows: 1. Air filter: There are many dust particles suspended in the air, and the main component of these suspended particles is silicon dioxide (Sio2), a substance harder than metal. Installing an air filter can reduce wear on parts such as cylinders, pistons, and piston rings. 2. Oil filter: During the use of an internal combustion engine, mechanical impurities such as dust, metal shavings, and carbon deposits will continuously mix into the oil. At the same time, the oxidation effect of air and combustion exhaust gases on the oil will gradually cause the oil to produce gum. The mixture of mechanical impurities and gum can also form sludge, which not only accelerates the wear of moving parts but also easily causes oil passage blockage. 3. Fuel filter: During the storage, transportation, and refueling process, gasoline is inevitably mixed with some mechanical impurities and water. These impurities enter the fuel supply system and engine cylinders along with the fuel, accelerating cylinder wear.
1
0
Share

What is the actual fuel consumption of the Beidouxing X5?

Comprehensive fuel consumption per 100 kilometers: 5.3 liters. Here are some fuel-saving tips for the Changhe Suzuki Beidouxing X5: 1. Reduce weight: Increase tire pressure to reduce the contact area between the tires and the road surface, thereby decreasing driving friction and ultimately saving fuel. Remove unused items from the car to lighten the vehicle, as extra weight increases the car's load and consequently fuel consumption. 2. Gentle throttle: Avoid pressing the throttle too hard in low gears. Since the transmission ratio is fixed, using excessive throttle to increase engine RPM for slight acceleration equates to high power at low speed, which wastes fuel. The correct method is to apply just enough throttle to overcome uphill resistance.
3
5
Share

Which Brand of Engine Oil Reduces Engine Noise

Engine noise can be reduced by using fully synthetic engine oil. Currently, many brands offer fully synthetic oils, such as Mobil, Castrol, Shell, Liqui Moly, Fuchs, Motul, Amsoil, Pennzoil, Great Wall, Tongyi, and HKS. When selecting engine oil, in addition to focusing on whether it is fully synthetic, you should also consider the oil viscosity based on usage conditions, seasons, and other factors. Here are the reasons for using fully synthetic engine oil: 1. Temperature range: Synthetic oil has a wider temperature range compared to semi-synthetic and mineral oils. 2. Lifespan: Synthetic oil is less prone to deterioration, has low evaporation loss, and lasts longer than conventional oils. 3. Multiple advantages: It has excellent chemical stability, good radiation resistance, high oil film strength, fewer foams, good lubrication, and less wear. 4. Engine protection: Fully synthetic oil has reduced thermal degradation, saves fuel, and provides better engine protection.
20
4
Share

How to Adjust the Steering Tie Rod?

Adjustment methods for the steering tie rod are as follows: 1. Increase the camber angle: If the vehicle experiences insufficient steering tie rod near the apex, the camber angle should be increased to enhance the front wheels' grip, or the rear toe angle should be reduced to help balance the grip between the front and rear axles and increase the front track. 2. Lower the front axle height: For rear-wheel-drive models experiencing insufficient steering tie rod when exiting a turn, lowering the front axle height can counteract this force, or increasing the damping coefficient of the shock absorbers can promote more front axle travel or compress the rear shock absorber's travel. 3. Enhance the limited-slip differential: If this occurs in front-wheel-drive models, improving the effectiveness of the limited-slip differential can also resolve this issue.
2
0
Share

What Are the Types of Independent Suspension?

Independent suspension types include double-wishbone, single-wishbone, trailing arm, single oblique arm, multi-link, and MacPherson strut (link-rod/swing-arm) types. Here is more relevant information: 1. Advantages of Independent Suspension: Its main benefits are that impacts on one wheel do not affect the other, and the suspension is lightweight with excellent shock absorption and damping performance. Independent suspension reduces unsprung mass (the weight of components below the suspension), improving vehicle handling and ride comfort. Since it uses a split axle design, it can also lower the engine position, simplify chassis layout, and facilitate lowering the vehicle's center of gravity. 2. Independent Suspension Location: Independent suspension means each wheel on either side of the vehicle is individually connected to the frame or body through an elastic suspension system.
10
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.