What to Do When Your Driving License Accumulates 12 Points?

What to Do if the Tiida Shock Absorber is Leaking Oil?

The solutions for a leaking shock absorber in the Tiida: 1. Tighten the oil cylinder cover nut. If the shock absorber still leaks oil, it may be due to damaged or failed oil seals or sealing gaskets, which should be replaced with new ones. 2. If the leak persists, pull out the shock absorber rod. If you feel any sticking or uneven resistance, further check whether the gap between the piston and the cylinder is too large, whether the shock absorber piston rod is bent, and whether there are any scratches or marks on the piston rod surface or the cylinder. The Tiida's body dimensions are 4393 mm in length, 1766 mm in width, and 1539 mm in height, with a wheelbase of 2700 mm. The Tiida features front-wheel drive, with a front suspension type of MacPherson strut independent suspension with a high-rigidity stabilizer bar, and a rear suspension type of torsion beam non-independent suspension with a high-rigidity stabilizer bar. The body structure is a unibody design.

7

3

Share

What is the difference between a long shot and a full shot?

The differences between a full shot and a long shot are: 1. Different representations; 2. Different classifications; 3. Different emphases. More information about full shots and long shots is as follows: 1. A long shot has a deep and wide field of view, mainly representing geographical environments, natural landscapes, and expansive scenes. A full shot generally depicts the full-body image of a character or the complete view of a specific scene. 2. A full shot focuses on a specific subject as the center of the entire scene. A long shot is composed of a vast space and various complex elements at a greater distance. The division of shot types generally includes five categories, from close to far: close-up (above the shoulders of a person), medium close-up (above the chest of a person), medium shot (above the knees of a person), full shot (the entire body of a person and the surrounding background), and long shot (the environment where the subject is located).

2

1

Share

Should private cars generally use 92 or 95 when refueling?

Private cars require different types of gasoline depending on the model and brand. Here is a detailed introduction to the two types of gasoline: 1. 92 gasoline: 92 gasoline has an octane rating of 92 and a heptane content of 8, making it suitable for mid-range cars (with lower compression ratios). 2. 95 gasoline: 95 gasoline consists of 95% isooctane and 5% heptane. High-compression engines should use high-octane gasoline. Using low-octane gasoline in high-compression engines can cause abnormal combustion, leading to knocking, increased fuel consumption, and reduced driving power. Of course, high-compression engines can also use lower-grade gasoline, but it is not advisable to choose gasoline solely based on compression ratio. Instead, follow the manufacturer's recommendations. 3. Differences between 92 and 95 gasoline: Anti-knock properties differ. The gasoline grade represents anti-knock performance, with higher grades indicating better resistance to knocking. Prices vary, with 95 gasoline being slightly more expensive than 92 gasoline. Performance differs, as 95 gasoline is suitable for engines with higher compression ratios.

6

3

Share

How to adjust the clock on Hyundai Verna?

Method to adjust the clock on Hyundai Verna: 1. Turn on the ignition switch to display the time on the dashboard; 2. Press and hold the protruding button in the middle of the dashboard for 3 seconds, and the clock on the dashboard will start blinking; 3. Press the button up or down to change the clock; 4. After adjusting the clock, wait for 2 seconds until the minutes start blinking, then continue pressing the button up or down to adjust the minutes to the correct value. The body dimensions of the Hyundai Verna are 4300 mm in length, 1705 mm in width, and 1460 mm in height, with a wheelbase of 2570 mm. The Hyundai Verna features front-wheel drive, with a MacPherson strut front suspension and a torsion beam rear suspension.

3

0

Share

How much is 5 degrees of steering wheel in Subject 3?

In Subject 3, the size of 5 degrees of the steering wheel is determined by taking the center of the steering wheel as the center of a circle and using the radial angle of the steering wheel as the angle. This allows you to see the deviation angle of the car's steering wheel. Generally, a deviation of more than 1.5 degrees will cause a delay in the car's steering, and turning 5 degrees is roughly equivalent to turning the steering wheel by one-tenth. There are three common faults with the steering wheel, as detailed below: Steering Wheel Lock: This means the steering wheel cannot be turned. It occurs when the car is turned off, and the steering wheel automatically locks due to the anti-theft function. The steering wheel will automatically unlock when the car is started. Steering Wheel Scratches: This type of fault can be repaired by going to a professional auto repair shop for maintenance. Steering Wheel Shaking: Steering wheel shaking usually occurs at speeds between 80 km/h and 90 km/h. It can return to normal when the speed exceeds 90 km/h. Using the steering wheel is simple: turn the steering wheel in the direction you want the car to go. When using the steering wheel, you need to hold it with both hands and avoid single-handed operation.

17

4

Share

How to Reset the Tire Pressure Monitoring Alarm After Changing Tires?

After changing tires, the steps to reset the tire pressure monitoring alarm are as follows: 1. Park the car, turn off the engine, and engage the handbrake. 2. Power on the car but do not start the engine. 3. Simultaneously press and hold the lock and unlock buttons on the remote for 5 seconds until you hear two short honks (the sound is not very loud). 4. Proceed to reset each tire in the following order: left front, right front, right rear, left rear. 5. First, reset the left front tire: remove the valve cap and continuously deflate (or inflate) the tire until you hear a short honk, indicating the tire is successfully reset. Deflation may take 10 to 20 seconds. If no honk is heard, continue deflating. 6. Then, follow the same method and the above order to reset the other three tires. 7. After the last tire is reset, the car will immediately emit two short honks. At this point, the tire pressure reset is complete.

8

4

Share

What to Do When Your Driving License Accumulates 12 Points?

What to Do if the Tiida Shock Absorber is Leaking Oil?

What is the difference between a long shot and a full shot?

Should private cars generally use 92 or 95 when refueling?

How to adjust the clock on Hyundai Verna?

How much is 5 degrees of steering wheel in Subject 3?

How to Reset the Tire Pressure Monitoring Alarm After Changing Tires?

Can I Borrow a Car When My Vehicle Is Being Repaired at a 4S Shop?

What does it mean to not follow the examiner's instructions during Subject 3 driving test?

Will There Be a Record for the Makeup Exam of Subject One?

How to Check Deductions in Subject 2 Exam?