What to Do When Your Driver's License Points Are Depleted?

1 Answers
StCamille
07/30/25 9:40am
If your driver's license points are depleted, you can participate in study and examination. For individuals whose points do not reach 12 within the scoring cycle, have completed the processing of traffic violations, paid all fines, the points will be cleared. For those who still have unpaid fines, the points will carry over to the next scoring cycle. The calculation method for the driver's license scoring cycle is as follows: 1. The cycle starts from the day the driver's license is first issued, with each cycle lasting 12 months. According to the "Regulations on the Application and Use of Motor Vehicle Driver's Licenses," Article 65, the cumulative scoring cycle for road traffic safety violations (i.e., the scoring cycle) is 12 months, with a full score of 12 points, calculated from the date the motor vehicle driver's license is first issued; 2. Based on the severity of road traffic safety violations, the points for a single violation can be: 12 points, 6 points, 3 points, 2 points, or 1 point; 3. Article 66 states that for motor vehicle drivers' road traffic safety violations, penalties and point deductions are executed simultaneously. If a motor vehicle driver commits more than one violation at a time, the points should be calculated separately and accumulated.
Was this review help?
4
5
Share
More Forum Discussions

Is it necessary to apply film on double-silver coated glass?

It is still necessary to apply film on double-silver coated glass. Introduction to coated glass: Coated glass, also known as reflective glass, involves coating one or multiple layers of metal, alloy, or metal compound films on the glass surface to alter its optical properties and meet specific requirements. Based on different product characteristics, coated glass can be categorized into the following types: heat-reflective glass, low-emissivity glass, conductive film glass, etc. Production methods of coated glass: Vacuum magnetron sputtering, vacuum evaporation, chemical vapor deposition, and sol-gel methods. Magnetron sputtering coated glass utilizes magnetron sputtering technology to design and manufacture multi-layer complex film systems, allowing for the application of various colors on white glass substrates. The film exhibits excellent corrosion resistance and wear resistance, making it one of the most widely produced and used products. Vacuum evaporation coated glass, in terms of variety and quality, falls short compared to magnetron sputtering coated glass and has gradually been replaced by vacuum sputtering methods.
15
0
Share

What is the difference between one-step and two-step reverse parking?

The difference between one-step and two-step reverse parking lies in the higher success rate of the two-step method. Below are some key points to pay attention to during reverse parking: 1. Adjust the initial position before reversing: Before parking, pull the car to a suitable position, observe the distance between the car body and the side line, and ensure the car body is aligned. A proper initial position can significantly increase the success rate of parking. 2. Maintain a distance of approximately 30cm between the car body and the corner of the parking space: When the rear right wheel passes the corner and enters the parking space, if the distance between the rear right wheel and the side line exceeds 30cm, the left rear corner of the car body may hit the infrared line in the test area. Therefore, while reversing, observe the right rearview mirror to maintain a distance of about 30cm between the car body and the corner. 3. Slow down and adjust the car body: When half of the car body is already in the parking space and the steering wheel is straightened, promptly adjust the car body if it is tilted.
6
3
Share

What size spray gun is used for multicolor paint?

Spraying multicolor paint requires a spray gun with a 3.0 mm nozzle. Introduction to spray guns: A spray gun is a tool for applying paint, used in surface treatment of products and is a type of coating equipment. It atomizes paint into fine droplets using compressed air, which are then propelled by airflow onto the surface to be painted. The spray gun mainly consists of a spray cap, nozzle, needle valve, and gun body, and requires an external connection to a pneumatic device such as a pressure tank, pressure pot, or pump. Compared to traditional manual brushing, spray guns are more time-efficient, aesthetically pleasing, and 5 to 10 times more efficient. They produce a fine, smooth, and even paint film. Maintenance of spray guns: Before and after each use, add 3 to 4 drops of specialized pneumatic maintenance oil into the tool's air inlet to reduce wear and extend the tool's service life. Ensure the air supply to the tool is dry and free of impurities. Regularly clean, lubricate, and maintain the tool, and replace worn parts promptly.
16
4
Share

What are the reasons for a new fuel-injected motorcycle lacking power when climbing hills?

The reasons for a motorcycle lacking power include issues with the ignition switch and air filter. Contact issues: Poor contact in the ignition switch or a faulty connection in one of the ignition system wires can cause irregular ignition. It’s also possible that the ignition system itself is faulty. Check if the drive belt has stretched significantly, causing slippage, or if the variator weights and belt pulley are worn. If the air filter or exhaust pipe is clogged, insufficient air intake and exhaust can also lead to power loss. Fuel tank issues: If the carburetor’s air-fuel mixture is incorrect or clogged, similar problems can occur. Scooter motorcycles have an electronic choke—check if it is open. A malfunctioning vacuum fuel valve can cause poor fuel delivery. Worn camshafts or valve rocker arms can disrupt proper air intake and exhaust. If there is air in the fuel line, fuel supply may become intermittent when climbing hills due to tank movement. Also, check if the spark plug is misfiring.
14
2
Share

Is CRRC Times Electric a State-Owned Enterprise?

CRRC Times Electric is a state-owned enterprise and a new energy vehicle company. Introduction to CRRC Times: CRRC Times Electric Co., Ltd. was established in July 2007 and is located in Hunan. It is the first company in China to obtain the qualification for manufacturing new energy vehicles, forming four major business segments: large and medium-sized buses, light buses, special vehicles, and key components. The company engages in road freight transportation, research and development, manufacturing, sales, and after-sales service of battery systems, battery recycling and utilization, construction and operation of charging infrastructure, manufacturing of intelligent vehicle equipment, research and development of intelligent technologies, services, and import and export of the aforementioned technologies and products. Development of CRRC Times: During the laboratory construction period, research was conducted on the configuration, matching, and testing of hybrid and pure electric systems for electric vehicles. Key technologies such as motor drive systems, vehicle electrical systems, and energy storage systems were studied and experimentally verified. The company has undertaken and participated in national-level projects such as the Innovation Engineering Project of the Four Ministries and Commissions and the 863 Program of the Ministry of Science and Technology. It has published papers, applied for patents, and obtained patent authorizations.
15
0
Share

How many points are deducted for stalling and rolling back on a slope?

In the Subject 2 driving test, rolling back results in a 10-point deduction. According to the 'Content and Methods of Motor Vehicle Driver Tests', if the vehicle rolls back less than 30 cm during startup, 10 points are deducted. Details are as follows: Overview of Subject 2: Subject 2, also known as the small road test, is part of the motor vehicle driver's license assessment and refers to the field driving skills test. The test items for small vehicles C1 and C2 include five mandatory components: reversing into a garage, parallel parking, stopping and starting on a slope, turning at a right angle, and driving on a curve. Requirements for the Subject 2 test: If a candidate fails the Subject 2 test for the first time, they are allowed one retake. If the candidate does not take the retake or fails the retake, the test is terminated, and the applicant must reschedule the test after ten days. During the validity period of the driving skills test permit, the number of scheduled tests for Subject 2 and Subject 3 (road driving skills test) must not exceed five times.
6
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.