What to Do When Your Driver's License Accumulates 24 Points?

2 Answers
DiFaith
07/28/25 7:59pm
Accumulating 24 points on your driver's license means the license has been revoked, and you need to retake the driver's license test. Below is a detailed introduction about driver's license points deduction: 1. Overview: For drivers holding a large truck driver's license, if they accumulate more than 6 points but less than 12 points during the one-year probation period, the probation period will be extended by one year. If they again accumulate more than 6 points but less than 12 points during the extended probation period, their probationary driving qualification for the corresponding vehicle type will be revoked. 2. Others: If a motor vehicle driver accumulates a full 12 points during the probation period, their probationary driving qualification for the corresponding vehicle type will be revoked. For ordinary large truck driver's licenses, accumulating full points will not result in downgrading, but the driver must undergo training. Only after passing the subject one test can the driving qualification be restored.
Was this review help?
1
1
Share
MacAndres
08/12/25 12:49am
Losing 24 points on your driver's license is quite troublesome. As someone who has been driving for years, I've heard that immediate action is required in such cases. Accumulating 24 points means serious violations, and you must report to the traffic management department to attend a roughly 7-day traffic safety course, which can be tiring with daily lectures. After completing the course, you'll need to take exams—the theoretical part is the Subject 1 test, and you might also have to take the Subject 3 practical driving test. Only after passing all these will your points be reset and your license restored. The cost isn't low, with tuition and exam fees totaling around 2,000 yuan. Delaying could lead to your license being revoked, which would be even worse. It's advisable to use the Traffic Management 12123 App to check your points and avoid accumulating violations. Always pay attention to speed limits and traffic signals when driving—safety first.
Was this review help?
19
0
Share
Expand All
More Forum Discussions

How to Sit in the Back Seat of a Mustang?

To sit in the back seat of a Mustang, simply tilt the front seats forward and enter the rear directly. It's important to note that the rear space in a Mustang is very limited and not suitable for long-distance travel. The currently available Mustang model is the 2019 version, which is positioned as a mid-size sports car. It offers two powertrain options: the first is equipped with a 2.3T inline 4-cylinder turbocharged engine paired with a 10-speed automatic transmission; the second features a 5.0-liter V8 naturally aspirated engine, also matched with a 10-speed automatic transmission. The Mustang's dimensions are 4778mm in length, 1877mm in width, and 1417mm in height, with a wheelbase of 2720mm. The Mustang's exterior is simple yet exudes a raw, untamed character, with a no-nonsense design that prioritizes practicality—a standout feature of the Mustang.
17
2
Share

What Causes the Ticking Noise in the Octavia's Idle Engine?

The ticking noise in the Octavia's idle engine is caused by: 1. Excessive wear of valve components; 2. Insufficient oil pump pressure; 3. Thickened or poor-flowing engine oil. The Octavia is a 5-door, 5-seat hatchback with body dimensions of 4675mm in length, 1814mm in width, and 1460mm in height, with a wheelbase of 2686mm. The Octavia is equipped with a 1.2T turbocharged engine and a 7-speed dual-clutch transmission, delivering a maximum power of 85 kW and a maximum torque of 200 Nm. It features front-wheel drive, with a front suspension using MacPherson struts and a rear suspension employing a torsion beam non-independent suspension.
8
1
Share

What are the precautions for changing gasoline grades?

The main precautions for changing gasoline grades are as follows: The viscosity of the engine oil should be as low as possible: Under the premise of ensuring reliable lubrication of the engine, the viscosity of the engine oil should be as low as possible. High-viscosity engine oil is only suitable for severely worn engines or for use in the southern summer. Blindly choosing high-viscosity engine oil will increase the resistance during engine operation, thereby increasing fuel consumption. Multi-grade oil should be used whenever possible: Multi-grade oil has excellent viscosity-temperature performance, lasts longer in engines, saves fuel, is suitable for all seasons, and is easier to manage. When using multi-grade oil, the oil color tends to darken, and the oil pressure is slightly lower than that of conventional oil. These are normal phenomena and do not affect usage.
10
4
Share

Why does the motorcycle emit white smoke after an oil change?

The engine temperature is too low, causing poor atomization of the air-fuel mixture entering the cylinder, which leads to white smoke emission. Introduction to engine oil: Engine oil, also known as engine lubricant (English name: Engine oil), plays multiple roles in the engine, including lubrication and wear reduction, auxiliary cooling, sealing and leak prevention, rust and corrosion protection, and shock absorption. It is often referred to as the "blood" of a vehicle. Engine oil consists of two main components: base oil and additives. The base oil is the primary constituent of lubricants, determining their fundamental properties, while additives compensate for and enhance the shortcomings of the base oil, providing additional performance characteristics, making them a crucial part of lubricants. Preventive measures for oil burning: Use high-quality engine oil. Under prolonged high-temperature conditions, engine oil is prone to corrosion and aging, leading to thinning of the oil film and making it easier to enter the combustion chamber and participate in combustion. Therefore, using high-quality engine oil can significantly delay this phenomenon. Pay attention to the cleanliness of the fuel system. During combustion, fuel inevitably produces carbon deposits, which are the root cause of various automotive issues.
6
5
Share

Where is the tire pressure monitoring system on the MG6?

The tire pressure monitoring system on the MG6 is located on the dashboard, and its indicator light is yellow. How the MG6's tire pressure monitoring works: The wheel speed sensor detects the rotation speed of the wheels. When the speed difference between one wheel and the others is too large, the system determines that the tire pressure of that wheel is abnormal, and the tire pressure monitoring warning light on the dashboard will illuminate. Taking the 2020 MG6 as an example, its body dimensions are: 4704mm in length, 1848mm in width, and 1466mm in height, with a wheelbase of 2715mm and a fuel tank capacity of 50 liters. The 2020 MG6 features a MacPherson strut front suspension and a multi-link independent rear suspension. It is equipped with a 1.5L inline 4-cylinder turbocharged engine, delivering a maximum horsepower of 188PS, a maximum power of 133kW, and a maximum torque of 285Nm, paired with a 6-speed manual transmission.
8
5
Share

Is the Toyota CVT Transmission Starting Gear Actually Useful?

Toyota CVT transmission starting gear is useful. The adoption of a new starting gear structure has achieved a 15% improvement in transmission efficiency and an increase in gear ratio. By reducing the angle of the steel belt and miniaturizing the pulley, the shifting speed has been enhanced by 20%. Relevant details about the CVT transmission are as follows: 1. Detail one: The lifespan of a CVT transmission depends on driving habits, as well as the vehicle's load and horsepower. Frequent hard acceleration and sudden braking may accelerate the wear of the CVT transmission steel belt. As for whether the lifespan can reach 150,000 kilometers, it varies from person to person and car to car; some may not even reach that. 2. Detail two: The advantages of a CVT transmission include its compact size, lightweight, good fuel economy, and smooth driving experience. The downside is that once the conical pulley and steel belt wear out or the steel belt deforms, the repair costs are relatively high, almost comparable to replacing the entire transmission.
13
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.