What to Do When Your Car's Fuel Consumption Increases?

1 Answers
VonCarmen
07/29/25 5:42pm
If your car's fuel consumption is high, you can take the following measures: 1. Pay attention to fuel quality and clean carbon deposits: Poor-quality gasoline can lead to increased carbon deposits in the engine. Excessive carbon deposits can roughen the intake pipe walls, affecting the intake efficiency and the quality of the air-fuel mixture. For example, the kinetic energy that could be produced by 1 liter of fuel may now require 1.5 liters to achieve, causing a significant rise in fuel consumption. 2. Replace spark plugs regularly: Don't underestimate a small spark plug—its role is to ignite the air-fuel mixture with an electric spark generated by high voltage. If damaged, it can reduce ignition energy, causing uneven combustion of the mixture, slowing down acceleration, and increasing fuel consumption. The lifespan of standard spark plugs is only 30,000–50,000 kilometers, while iridium spark plugs last about 50,000–80,000 kilometers, and platinum spark plugs can last up to 100,000 kilometers. Most domestic car models include spark plug replacement as part of major maintenance services.
Was this review help?
19
1
Share
More Forum Discussions

What is the Difference Between 0w20 and 0w30 Engine Oil?

The differences between 0w20 and 0w30 are as follows: Oil viscosity differs: 0w20 has lower viscosity; 0w30 has higher viscosity. Oil film thickness differs: 0w20 forms a thinner oil film; 0w30 forms a thicker oil film. Fuel efficiency differs: 0w20 is thinner, flows better, and offers less resistance to engine operation; 0w30 is thicker, flows worse, and offers more resistance to engine operation. The numerical value after the 'W' in 0w20 and 0w30 oil grades represents the high-temperature viscosity rating of the oil. This indicates the likelihood of thinning at high temperatures—the larger the number, the higher the viscosity, and the higher the applicable environmental temperature. The number before the 'W' represents the flow performance at low temperatures—the smaller the number, the better the starting performance in cold conditions. The number after the 'W' represents the oil's stability at high temperatures, i.e., its tendency to thin—the larger the number, the better the oil's high-temperature stability. Points to note when selecting engine oil: Choose engine oil based on the engine's requirements. It is unnecessary to use overly high-grade oil in engines with lower requirements, nor should lower-grade oil be used in engines with higher requirements. Multi-grade oils are preferable. Multi-grade oils are economical, long-lasting, and efficient, providing better protection for the engine. Due to their characteristics, multi-grade oils may appear darker prematurely and exhibit lower oil pressure compared to conventional oils—both are normal phenomena.
18
0
Share

What Causes Excessive NO in Vehicle Exhaust?

There are many factors that can lead to excessive vehicle exhaust emissions, and specific inspections are required to confirm the exact cause. Excessive NO is primarily caused by poor combustion leading to an overly rich air-fuel mixture. It is necessary to check components such as spark plugs, fuel injectors, and high-voltage wires. Generally, it is recommended to clean the engine carbon deposits, the three-way catalytic converter, and the oxygen sensor before an emissions test to effectively reduce emissions. Below is an introduction to the causes of excessive vehicle exhaust emissions: Aging of vehicle components: This mainly applies to older vehicles, as prolonged use leads to aging of various parts. Owners can often clearly notice a significant decline in performance, and the vehicle's exhaust emissions are noticeably worse than before. Additionally, due to advancements in production technology and stricter emission standards, older vehicles that once met production standards may now easily exceed emission limits. Use of low-quality fuel: Fuel quality also has a certain impact on vehicle exhaust emissions. Imported vehicles, especially high-end models, often require higher fuel quality. However, fuel quality in some domestic regions, particularly remote areas, frequently fails to meet the required standards. Long-term use of low-quality fuel can easily lead to excessive emissions, resulting in failure during the annual vehicle inspection.
8
2
Share

Where is the intermittent wiper relay for Haval H3 located?

Haval H3 intermittent wiper relay is located in the No.1 fuse box under the dashboard on the driver's side. Definition of wiper: The wiper is driven by a motor, which converts the rotational motion of the motor into reciprocating motion of the wiper arm (the part above the windshield other than the blade) through a linkage mechanism, thereby achieving the windshield wiping action. Definition of intermittent wiper relay: It is an automotive wiper intermitter that can control the wiper assembly to work intermittently. It consists of a rectangular housing with a fixed end cover at the opening end, where three terminals are mounted. Corresponding sliding grooves are made on the left and right side walls inside the housing. A circuit board is inserted and fixed in these grooves, with electronic components installed on it. It can not only trigger conduction once after quick startup but also wait for the next trigger conduction according to the set time (interval), working in continuous cycles to achieve intermittent control of the wiper assembly.
5
2
Share

What is the reason for the Buick 1.6t idling shake but not shaking when driving?

Buick 1.6t idling shake but not shaking when driving may be due to excessive carbon deposits inside the engine or prolonged use of spark plugs. Excessive carbon deposits in the engine: Excessive carbon deposits inside the engine can absorb a certain amount of fuel during startup, leading to a lean air-fuel mixture. When the carbon deposits become saturated with gasoline, the engine starts to operate normally. However, when the mixture is ignited, the gasoline absorbed by the carbon deposits is sucked into the cylinder by vacuum, causing the mixture to become too rich. This alternating lean and rich condition results in engine shaking. Prolonged use of spark plugs: Prolonged use of spark plugs can cause the spark plug gap to widen or excessive carbon buildup at the ignition point. These issues can lead to poor sparking or insufficient ignition energy, resulting in cylinder misfire, reduced power, and engine shaking.
14
2
Share

What Causes the Loud Noise in Volkswagen's Secondary Air Pump?

Volkswagen's secondary air pump may produce loud noise due to a dirty air valve. Working principle of the secondary air pump: When the engine is running, the crankshaft drive belt drives the air pump to operate, pumping a large volume of low-pressure air flow through a hose into the diverter valve. Under normal conditions, the valve on the diverter valve opens, allowing the air flow to pass through the diverter valve and the one-way valve into the air injection manifold. Function of the secondary air pump: The secondary air pump supplies air to the catalytic converter when the engine is cold. This allows the exhaust gases to react with the oxygen in the air for secondary combustion, increasing the temperature of the catalytic converter. This helps the catalytic converter reach its optimal operating temperature quickly, reducing the emission of harmful substances and serving an environmental protection purpose.
5
4
Share

What causes the shaking when the air conditioning is turned on in a Mercedes-Benz C-Class?

Mercedes-Benz C-Class shaking when the air conditioning is turned on can be attributed to the following reasons: Excessive compressor pressure: If the idle speed shakes immediately after turning on the air conditioning, it is likely due to high and low pressure issues. Therefore, it is essential to check the air conditioning's high and low pressure to see if the pressure is too high. Excessive pressure increases the engine load, thereby affecting the car's stability. Throttle needs cleaning: If the idle speed shakes when starting the car and turning on the air conditioning, it is necessary to check whether the throttle is clean. If it is dirty, clean it promptly. Engine carbon buildup or aging: When the car experiences idle speed shaking, the issue generally lies with the engine. If the engine is not cleaned for a long time or shows signs of aging, it will affect the engine's normal operation. Air conditioning issues: Check whether the air conditioning radiator is unobstructed, as this can also cause idle speed shaking when the air conditioning is turned on.
16
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.