What to Do When Your Car Runs Out of Battery and Won't Start on the Road?

How to Turn On High Beam and Low Beam?

Push the lever forward one notch for low beam, and another notch for high beam. Pushing it back switches back to low beam. Here are details about low beam and high beam: 1. Generally, pushing the switch toward the engine compartment keeps the high beam continuously on; pulling it back one notch turns off the high beam and restores low beam; pushing it one notch toward the driver activates temporary high beam flash, and releasing the switch automatically returns it to the low beam position. This is commonly used to alert vehicles in the opposite lane, known as alternating between high and low beams. 2. If the high beam is pushed outward, the condition for turning on the high beam is that the low beam must be on. Otherwise, operating on other light settings won't allow the high beam to be turned on. However, pushing inward to flash the high beam once is unrestricted and can be done even when the lights are off.

2

3

Share

How long does it take for Beijing multi-vehicle transfer applications to be approved?

Beijing multi-vehicle transfer applications take 3-10 working days to be approved. Normally, the application will be processed within three working days (excluding the day of submission) after system submission. The required time may vary depending on different regions. Vehicle owners can check the progress of their application through the online progress tracking system using the online motor vehicle transfer service serial number. Generally, subsequent transfer procedures can be completed at the local vehicle management office within ten working days. Application method: Apply for transfer through the website of the Traffic Safety Comprehensive Service Management Platform of the provincial traffic control bureau. The same operation can also be performed on mobile phones. Transfer registration to children or parents: For individuals with multiple vehicles (those with only one vehicle cannot apply) who wish to transfer vehicles to their children or parents, they must submit an application through the Beijing Passenger Car Quota Regulation Management Information System. After approval and obtaining the verification results, the transfer registration can be processed through transaction transfer or gift notarization. Both the registered vehicle owner and the transferee must go to the designated location to complete the transfer registration.

5

Share

How Often Should Full Synthetic Engine Oil Be Changed?

Full synthetic engine oil should be changed every 10,000 kilometers. More details about full synthetic engine oil are as follows: 1. Strictly speaking, full synthetic engine oil refers to high-quality oil products made entirely from PAO or artificially synthesized esters, usually labeled with the word "synthetic" on the oil container. 2. The functions of full synthetic engine oil are as follows: 1) Lubrication and wear reduction. There is rapid relative sliding between pistons and cylinders, as well as between main shafts and bearings. To prevent excessive wear of parts, an oil film needs to be established between the two sliding surfaces. A sufficiently thick oil film separates the surfaces of the relatively sliding parts, thereby reducing wear. 2) Cooling. Full synthetic engine oil can carry heat back to the oil tank and then dissipate it into the air, helping the radiator cool the engine. 3) Cleaning. Full synthetic engine oil can circulate carbon deposits, sludge, and worn metal particles from engine parts back to the oil tank, washing away dirt generated on the working surfaces of the parts through the flow of the lubricating oil.

7

5

Share

Is the Camry Produced by GAC Toyota or FAW Toyota?

The Camry is produced by GAC Toyota. Below is an introduction to the Toyota Camry: Body Dimensions: It is built on the new TNGA platform, with a body length of 4900mm, width of 1840mm, height of 1455mm, and a wheelbase of 2825mm. Powertrain: The Camry is equipped with three powertrain options: TNGA 2.5L HEV, TNGA 2.5L, and TNGA 2.0L. It offers a total of ten models across three series: Luxury, Sport, and Hybrid. Exterior Design: The Luxury version of the Camry features a trapezoidal horizontal grille design, with a streamlined body shape and a lower waistline. The extended rear roof enhances rear headroom.

14

5

Share

How to Determine When Brake Pads Need Replacement?

Light braking accompanied by a metallic scraping sound indicates that the brake pads have worn down to the point where the wear indicators are contacting the brake disc, signaling an immediate need for replacement. Additional details are as follows: 1. If the wear indicators on both sides of the brake pads are rubbing against the brake disc, it confirms that the brake pads have exceeded their service limit. When replacing brake pads, it's essential to inspect the brake discs as well. If the discs are damaged, they may also need replacement, especially in severe cases. If braking feels laborious, it suggests a loss of friction, necessitating immediate pad replacement. 2. New brake pads are approximately 1.5cm thick. With continuous use and friction, this thickness gradually decreases. Automotive professionals recommend that when visual inspection reveals the remaining thickness is down to one-third of the original (about 0.5cm), vehicle owners should increase self-inspection frequency and prepare for replacement.

19

2

Share

In which year were the National III emission standards implemented for vehicles?

The National III emission standards for vehicles were implemented on July 1, 2007. 1. The National III standard refers to China's third-stage vehicle emission standards. The National III emission standards are equivalent to European emission standards in terms of tailpipe pollutant levels, with the difference being that new vehicles must be equipped with OBD, the On-Board Diagnostics system. 2. The On-Board Diagnostics system features an increased number of detection points and detection systems, with oxygen sensors installed at both the inlet and outlet of the three-way catalytic converter. It ensures compliance with the standards through real-time monitoring of vehicle emissions, thereby better guaranteeing the enforcement of emission standards. 3. Compared to National II vehicles, National III vehicles are more fuel-efficient. For models around 5 tons, fuel consumption is reduced by approximately 1 liter per 100 kilometers, and for 10-ton models, the reduction is around 2 liters. However, this is only achievable under long-distance and stable driving conditions. For short-distance operations, the impact on fuel consumption is minimal.

12

4

Share

What to Do When Your Car Runs Out of Battery and Won't Start on the Road?

How to Turn On High Beam and Low Beam?

How long does it take for Beijing multi-vehicle transfer applications to be approved?

How Often Should Full Synthetic Engine Oil Be Changed?

Is the Camry Produced by GAC Toyota or FAW Toyota?

How to Determine When Brake Pads Need Replacement?

In which year were the National III emission standards implemented for vehicles?

What does 45Ah on the battery mean?

How many kilometers are required for the first maintenance of a new car?

Where is the license plate number 'Su' from?

What is the most suitable temperature for car air conditioning?