What to Do When Your Car Gets Scratched While Parked Outside?

Where is the cabin air filter located in the Soueast DX7?

The cabin air filter in the Soueast DX7 is located behind the glove box on the passenger side. Below are specific details about the cabin air filter: 1. The cabin air filter model for the Soueast DX7 is LAK948. The recommended replacement interval is generally every 8,000 to 10,000 kilometers driven, but this may vary depending on the vehicle's operating environment. If the environment has significant humidity variations, year-round dry climate, or heavy dust conditions, the filter should be replaced earlier. 2. The automotive cabin air filter is specifically designed for air purification inside the vehicle compartment. It utilizes highly efficient adsorption materials, combining activated carbon with long-fiber non-woven fabric to create an activated carbon composite filter cloth. This compact structure effectively filters smoke odors, pollen, dust, harmful gases, and various odors. The filter also efficiently captures and adsorbs particulate matter, achieving oil filtration and air purification while effectively removing organic gases such as TVOC, benzene, phenol, ammonia, formaldehyde, xylene, and styrene. It serves as an ideal material for high-end cars, sedans, and commercial vehicles as an automotive cabin air filter. 3. The purpose of the automotive cabin air filter is to prevent these harmful substances from entering the air conditioning system and damaging it. It provides a clean air environment for vehicle occupants, protects their health, and helps prevent window fogging.

19

1

Share

How to Turn on the Low Beam Headlights of Haval H6?

To use the low beam headlights of Haval H6, first turn on the headlight switch, then rotate the light switch knob to the low beam position. The following are specific introductions to the high and low beam headlights: 1. The lower limit position of the low beam headlights does not need to be too precise, as long as you can clearly see the road about 20 meters ahead. 2. The high beam headlights can be turned on by pushing the lever outward, but there is a prerequisite for turning on the high beam: the low beam headlights must be on. The high beam cannot be turned on when the light is in other positions (off or position lights). However, pulling the lever inward to flash the high beam once has no restrictions and can be operated even when the lights are off. 3. The headlights have two modes: high beam and low beam. Use low beam on urban roads with streetlights and high beam on roads without streetlights or highways. When passing intersections or overtaking, alternately switch between high and low beams to signal. The position lights, commonly known as "small lights," are used to display the width and length of the vehicle at night, alerting other vehicles and pedestrians to your presence. When you cannot see clearly behind you in the rearview mirror, it's time to turn on the small lights, including during rainy days.

9

2

Share

What are the gear positions of the Mercedes-Benz smart?

Mercedes-Benz smart has the following gear positions: N for Neutral, R for Reverse, D for Drive, and P for Park. Starting the engine: The engine can only be started when the gear lever is in the N position. Press the brake pedal and move the gear lever to the N position. Starting to move: Press the brake pedal and pull the gear lever from the N position to the left to the D (Drive) position. The gear indicator on the multifunction display will show 'A', indicating automatic mode. If the gear indicator shows '1', press the 'Automatic/Manual Mode Switch Button' on the left side of the gear lever once to switch to 'A' mode. Release the brake pedal and gently press the accelerator pedal to start moving forward. Reversing: Reverse gear can only be engaged when the vehicle is stationary. Press the brake pedal and pull the gear lever from the N position back to the R position. The gear indicator on the multifunction display will show 'R'. Release the brake pedal and gently press the accelerator pedal to start moving backward. Parking and turning off the engine: Press the brake pedal to stop the vehicle, pull up the handbrake lever (the indicator on the multifunction display will light up), move the gear lever to the N position, and turn off the ignition switch.

7

2

Share

Is the license plate number I or 1?

License plate numbers use the digit 1. Below are specific details: The vehicle serial number encoding rules of the People's Republic of China have three types: 1. Each digit of the serial number uses Arabic numerals; 2. Each digit of the serial number can individually use English letters, with the letters O and I excluded from the 26 letters of the alphabet; 3. The serial number allows for the use of 2 English letters, with the letters O and I excluded from the 26 letters of the alphabet. Below are some additional details: 1. Introduction: Motor vehicle license plates refer to the legal markings registered by statutory authorities, permitting motor vehicles to drive on roads within the People's Republic of China. License plates are generally hung in specific positions on motor vehicles, and their numbers are the motor vehicle registration numbers. 2. Material and function: License plates, referring to vehicle plates, are panels hung on the front and rear of the vehicle, typically made of aluminum, plastic, or stickers, displaying the vehicle's registration number, registration region, or other basic information. License plates serve as unique identifiers for each vehicle, with their primary function being to identify the province, city, or county to which the vehicle belongs. Vehicle management authorities can trace the owner of the vehicle through the license plate number.

18

3

Share

What Causes the Body Shaking of Audi A6?

Tire imbalance, ignition system issues, fuel system problems, and clogged fuel injectors can all cause the body of an Audi A6 to shake. Below are solutions for these four situations: 1. Tire Imbalance: The first possible cause is poor tire balance. It's necessary to perform a four-wheel alignment and dynamic balance as soon as possible. If the vehicle doesn't pull to one side, a dynamic tire balance may suffice. 2. Ignition System Issues: During a cold start, the engine requires a richer air-fuel mixture, which in turn needs higher ignition energy. If the spark plug gap is too large, or if the ignition coil or high-voltage coil is aging, it can lead to reduced ignition energy, causing the body to shake. 3. Fuel System Problems: Fuel system issues are generally caused by blockages in the fuel lines, leading to poor fuel supply. Symptoms include engine shaking, unstable idling, and stalling while driving. Additionally, a faulty fuel pump can also cause engine shaking. To diagnose a fuel pump issue, disconnect the fuel line and check the flow rate and volume of fuel. 4. Clogged Fuel Injectors: The fuel injectors in an electronic fuel injection vehicle are critical components for fuel delivery and have a long service life, potentially lasting hundreds of thousands of kilometers. However, deposits in gasoline can clog the injector nozzles, causing inconsistent fuel spray among injectors. This leads to uneven cylinder operation and engine shaking. The solution is to remove and clean them.

17

3

Share

What is the workflow of automotive crystal coating?

Automotive crystal coating workflow is as follows: 1. Wet the vehicle's paint surface with water, then apply foam and use a wool glove soaked in foam to clean off dirt from the paint surface. 2. Use clay bar with QD liquid to further clean the paint surface. The clay bar can remove fine dust particles from the paint surface and make it smooth. 3. Classify the paint surface as severe or mild based on scratches and deterioration, then choose different solutions according to the hardness of the paint. Avoid using abrasives containing silicon or wax to prevent affecting the crystal coating effect. 4. Wipe the paint surface with a degreaser using a non-woven cloth for degreasing. 5. After completing the above steps, begin the crystal coating. Each crystal coating product comes with a dedicated sponge and a small cloth. Wrap the sponge with the cloth, then drip a few drops of crystal coating liquid onto the cloth-wrapped sponge, and apply it evenly on the paint surface in straight lines or a crisscross pattern. 6. After applying the crystal coating agent, allow it to react for an appropriate time, then wipe the paint surface with a dedicated ultra-fine polishing towel until no residue remains and the paint surface is shiny. 7. After completing the crystal coating, avoid contact with water for two hours and prevent the crystal coating liquid from getting onto the car windows.

1

Share

What to Do When Your Car Gets Scratched While Parked Outside?

Where is the cabin air filter located in the Soueast DX7?

How to Turn on the Low Beam Headlights of Haval H6?

What are the gear positions of the Mercedes-Benz smart?

Is the license plate number I or 1?

What Causes the Body Shaking of Audi A6?

What is the workflow of automotive crystal coating?

What is the Beijing Hyundai Celesta?

How often should the transmission fluid be changed for the New Sagitar 1.6?

How to Open the Bonnet of the Binyue?

What Type of Tires Are Suitable for Ford Focus?