What to Do When Your Car Gets Scratched?

Should the Clutch Be Fully Depressed When Shifting Gears?

Clutch: The clutch must be fully depressed to shift gears. Here is additional information: Clutch: The so-called clutch utilizes "disengagement" and "engagement" to transmit an appropriate amount of power. Located between the engine and the transmission, it transfers the torque stored on the engine's flywheel to the transmission, ensuring that the vehicle delivers the right amount of driving force and torque to the drive wheels under different driving conditions. It falls under the category of the powertrain. Important Notes: The clutch transmits power through the friction of the clutch disc. When the clutch is fully depressed, the clutch disc separates from the high-speed rotating flywheel at the rear of the engine, preventing the clutch disc from being affected by the engine's power. If the clutch is not fully depressed and remains in a semi-engaged state, friction occurs between the clutch disc and the flywheel. Using semi-engagement when starting the car allows for a smooth start, and since the rotational speed is not high, wear is minimal. However, if the clutch is not fully depressed when shifting gears while driving, it will cause high-speed friction on the clutch disc, leading to rapid damage.

10

1

Share

What to Pay Attention to When Replacing Spark Plugs?

Precautions for spark plug replacement: When removing the high-voltage ignition wires, mark each cylinder's position to avoid confusion. Use a spark plug socket to remove the spark plugs one by one. During removal, check for external debris such as leaves or dust and ensure thorough cleaning. Methods to determine if a spark plug is damaged: Remove the spark plug and inspect its appearance to assess its condition. A normal spark plug's insulator skirt and electrodes should appear grayish-white, grayish-yellow, or light brown. A properly functioning spark plug has a reddish-brown insulator skirt, an electrode gap between 0.8-0.9mm, and no signs of electrode burn. If the spark plug is contaminated with oil or deposits but remains undamaged, clean off the oil and deposits before reuse. If the spark plug is severely damaged—showing signs of blistering, black streaks, cracks, or melted electrodes—identify the cause of the damage, resolve the issue, and replace the spark plug. Additionally, if the spark plug appears blackened as if smoked, it indicates incorrect heat range selection, a rich air-fuel mixture, or oil leakage.

14

2

Share

What does metallic paint mean for sedans?

Metallic paint is a type of paint that incorporates metal powder, giving the coated surface a sparkling appearance. Under different angles, the refraction of light can alter the perceived color and even the contours of the vehicle, enriching the overall visual appeal of the car's exterior. Here is more information about automotive metallic paint: 1. Automotive metallic paint is a high-end coating that uses metal powders, such as copper or aluminum, as pigments. It provides a metallic shimmer, enhancing the paint's premium feel and showcasing an elegant, noble aesthetic. It generally comes in two types: water-based and solvent-based. 2. Since metal powders are unstable in water and air, often undergoing chemical reactions that degrade their quality, their surfaces require special treatment. This makes metal powders for water-based paints expensive and limits their use. Currently, solvent-based metallic paints dominate the market. However, with advancements in technology and the continuous development of the automotive industry, producing safe and environmentally friendly automotive coatings can play a crucial role in opening new markets. 3. Metallic paint is harder than standard paint, making the car body less prone to scratches. It also enhances the vehicle's dimensional beauty. For owners without garages who must park their cars in open lots, where minor scrapes and bumps are inevitable, metallic paint is a significant advantage.

9

4

Share

What are the differences between B5 diesel and No. 0 diesel?

1. Different sources: B5 diesel is blended by using 'gutter oil' discarded from the catering industry and sewer pipelines through a series of biochemical reactions, mixed with ordinary diesel in a ratio of 5:95. No. 0 diesel belongs to ordinary diesel, mainly composed of diesel fractions produced through processes such as crude oil distillation, catalytic cracking, thermal cracking, hydrocracking, and petroleum coking, and further refined with additives. It is obtained from crude oil, shale oil, etc., through direct distillation or cracking processes. 2. Different environmental impacts: B5 biodiesel can reduce the emission of heavy metals and fine particulate matter by more than 10%, with a nitrogen oxide purification efficiency of up to 80%. No. 0 diesel contains more impurities and is more prone to producing soot during combustion, causing air pollution. The soot produced after diesel combustion may have carcinogenic effects. 3. Different scales of use: B5 biodiesel is currently used only in small-scale applications in some cities, and its production and use will continue to expand. No. 0 diesel belongs to ordinary diesel, and diesel vehicles mainly use the latter five grades of diesel. When the temperature is above 4℃, No. 0 diesel is selected, so No. 0 diesel is widely used at present.

10

5

Share

Does adding too much antifreeze affect the car?

Adding too much antifreeze from a reputable brand will not have any significant impact. The excess antifreeze will expand due to heat during vehicle operation and overflow through the pressure relief valve, which is harmless but may leave some stains. However, it is recommended to use a syringe to remove the antifreeze above the maximum water level. On the other hand, antifreeze produced by substandard manufacturers may be corrosive, potentially damaging the cooling system. Excess antifreeze overflow can also harm electrical wiring and other components in the engine bay, and in severe cases, it may corrode the radiator and flow into the engine. Generally, vehicle antifreeze should be replaced every 2 years or 40,000 kilometers. This is only a reference interval. For commercial vehicles with higher mileage, the replacement cycle should be shorter. Since driving conditions vary for each vehicle, the replacement should be based on actual usage. Regularly check the antifreeze level and replenish it promptly if it is low. If suspended particles, sediment, or discoloration are observed in the antifreeze, replace it immediately and clean the system. Methods to determine if antifreeze is low: Observe the antifreeze warning light on the dashboard. If it illuminates, it likely indicates low antifreeze, though it could also be due to excessively high engine temperature. Check the antifreeze reservoir. If the level is below the minimum mark (MIN), do not continue driving and add antifreeze promptly. Check the water level markings on the antifreeze tank. The normal antifreeze level should be between the maximum and minimum marks. If the antifreeze is below the minimum mark, it indicates a deficiency.

18

2

Share

How to Turn On and Off the Trip Function in Volkswagen?

The trip function on the car dashboard represents the trip mileage, which is a default feature that cannot be turned off. Below is some information about the car trip function: 1. The trip on the car dashboard represents the trip mileage, which can be used to record the kilometers traveled for each trip. 2. The mileage represented by trip is the distance traveled before the current stage is reset. If you want to start recording the mileage anew, you can long-press to reset it. The smallest unit of trip mileage is 0.1 kilometers, and the basic calculation method is the fuel consumption per hundred kilometers. The manufacturer also provides this parameter, which is calculated by dividing the actual fuel consumption by the actual distance traveled.

6

5

Share

What to Do When Your Car Gets Scratched?

Should the Clutch Be Fully Depressed When Shifting Gears?

What to Pay Attention to When Replacing Spark Plugs?

What does metallic paint mean for sedans?

What are the differences between B5 diesel and No. 0 diesel?

Does adding too much antifreeze affect the car?

How to Turn On and Off the Trip Function in Volkswagen?

Can I Apply for a Color Change Without the Green Book?

How to Reset the Maintenance Light on a Ford Raptor?

Can the buyer be absent during motorcycle ownership transfer?

How to Fold the Rearview Mirrors on the 2021 Lavida Plus?