···
Log in / Register

What to Do When You Miss an Exit on the Highway?

1 Answers
VanTyler
09/02/25 5:37am
Drive to the next exit. On highways, it is never allowed to stop, reverse, or drive in the wrong direction at any time. Here are the solutions for missing an exit on the highway: 1. Drive to the next exit: On highways, it is never allowed to stop, reverse, or drive in the wrong direction at any time, as doing so can easily cause traffic accidents! The best approach is summed up in four words—go with the flow. Exit at the next available exit, then make a U-turn and take a detour. Although it means driving a bit farther, you can still get back on track. "Better to take ten steps safely than one step dangerously"—it may cost a little extra time, but it ensures a safe journey. 2. Use the underground passage in the service area: Some highway service areas have a delivery passage for goods. If you realize you've missed an exit, you can ask the service area staff if you can make a U-turn through this passage. However, since this passage is not for public use, many service areas do not allow private vehicles to pass through.
Was this review help?
4
5
Share
More Forum Discussions

Why is the P light flashing continuously?

The reason the P light keeps flashing is that the handbrake is not fully released. Generally, adjusting the handbrake and ensuring it is fully released will resolve the issue. Here are some relevant details: 1. Red P: When the red P light is illuminated, it indicates that the parking brake system is engaged, meaning the handbrake is pulled tight. This is displayed in red on the instrument cluster as a normal status, not a fault. If it lights up or flashes along with other warning lights, such as the ABS light, it indicates a system fault. 2. Yellow P: When the yellow P light is illuminated, it usually means there is a fault stored in the parking brake or ABS system. Further inspection and confirmation are needed to troubleshoot the issue. 3. Green/Blue P: When the green or blue P light is illuminated, it indicates that the automatic parking and AUTO-HOLD system is functioning normally. The P light will illuminate to alert the driver when the system is active.
13
4
Share

Is It Normal for a Car Not to Start After Sitting for a Week?

It is quite normal for a car not to start after sitting for a week. The reasons for not starting are as follows: 1. Battery: A dead battery usually happens suddenly, and many car owners even encounter this situation while driving, leading to a breakdown. This could be due to the battery reaching the end of its lifespan or simply being discharged. 2. Spark plugs or ignition coils: Damaged spark plugs or ignition coils require inspection at a 4S shop or auto repair shop to confirm. 3. Alternator: A faulty alternator is relatively easy to diagnose; a mechanic can check it with a multimeter. 4. Fuel pump: A leaking fuel pump can also cause the car not to start.
1
5
Share

What is the P0140 trouble code?

P0140 trouble code refers to the oxygen sensor circuit inactivity, specifically the second oxygen sensor in the first bank. Here are the relevant details: 1. Possible causes: The causes may include exhaust pipe leakage, malfunction of the oxygen sensor itself or its circuit or connector, or electronic control module failure. During vehicle operation, the ECU continuously monitors the heated oxygen sensor to check its working status in real time. If the heated oxygen sensor signal value remains at the default value, the ECU will command an oscillating air/fuel ratio to attempt to detect changes in the signal value. If the ECU still cannot detect changes in the sensor's signal, this trouble code will appear. 2. Solutions: Take the vehicle to a professional repair shop for inspection. After troubleshooting, the trouble code must be cleared promptly. Clearing the trouble code should be done by professionals and not by disconnecting the negative terminal of the battery. Otherwise, it may cause the car's computer to lose its experiential memory, leading to the malfunction of certain car functions, reduced performance, and increased repair difficulty.
9
4
Share

Reasons for the Mazda6 center console screen not lighting up?

Because when starting the engine, the car battery needs to supply a very large current to the starter, sometimes other electrical devices may "steal power." Among them, the ACC power supply, which controls the car's entertainment and comfort systems, is the one that gets "power stolen." Here are some car starting tips: After inserting the key into the ignition switch, pause briefly at each gear position for about 1 or 2 seconds. During this time, you can hear the sound of electrical devices powering on, and the fuel pump builds up oil pressure, producing a slight abnormal noise. Wait until the sound disappears, or after about 10 seconds, then proceed to the next gear position, pause briefly, and start the car.
13
5
Share

Does Replacing the Engine Wiring Harness Harm the Car?

Replacing the engine wiring harness does not harm the vehicle. Here is an introduction to the engine wiring harness: 1. Introduction: The wiring harness is the main network of a car's electrical circuits. Without a wiring harness, there would be no car electrical circuit. 2. Principle: A wiring harness refers to a component formed by crimping contact terminals (connectors) made of copper material with wires and cables, then molding an insulator or adding an external metal shell, and finally bundling them to form a circuit connection. 3. Specifications: The commonly used wire specifications in automotive wiring harnesses include nominal cross-sectional areas of 0.5, 0.75, 1.0, 1.5, 2.0, 2.5, 4.0, and 6.0 square millimeters.
2
4
Share

What are the differences between the 2020 and 2021 Mazda models?

The differences between the 2020 and 2021 models are as follows: 1. Front fog lights: The 2020 Mazda3 (Axela) does not come with front fog lights, while the 2021 model is equipped with them. 2. Configuration upgrades: Compared to the 2020 model, the 2021 model features upgraded fabric seats to leather seats, blue-black interior to brown-black interior, and manual driver's seat to power-adjustable driver's seat. Some variants also added panoramic imaging, intelligent brake assist, and upgraded features like automatic headlights, rain-sensing wipers, and paddle shifters, providing a better driving experience. 3. Exterior: The 2021 Mazda3 (Axela) also offers sporty modification kits with distinctive styles, giving owners more options for exterior customization.
4
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.