What to Do When You Lose Your Motorcycle Key?

1 Answers
Gwen
07/28/25 4:15pm
If you lose your motorcycle key, here are some solutions: 1. Spare Key: Simply take the spare key to a locksmith to have a new key made. 2. Key Duplication: As long as you bring the ignition switch to a professional locksmith, you can get a replacement key. 3. Replace the Lock: Since the motorcycle's fuel tank cap and ignition switch use the same key, both locks need to be replaced in this situation, as key duplication is not an option. 4. Temporary Wiring to Start the Vehicle: 1) For DC ignition systems, follow the ignition switch wires and connect a black wire and a red wire with a pin to start the vehicle. 2) For AC ignition systems, follow the ignition switch wires and cut a black-and-white wire to start the vehicle.
Was this review help?
13
1
Share
More Forum Discussions

Which Gear is the Forward Gear in an Automatic Transmission?

In an automatic transmission, the D (Drive) gear is the forward gear. During normal driving, place the gear selector in the D position. The car will automatically shift between forward gears, allowing you to drive simply by engaging the D gear. The driver only needs to operate the accelerator and brake pedals. The P (Park) gear is the parking gear; engaging P after stopping the vehicle with the brake will lock the wheels, preventing the car from moving. The R (Reverse) gear is for reversing, while the N (Neutral) gear is typically used when waiting at a red light. The S (Sport) mode keeps the engine running at high speeds, enhancing the car's power. The L (Low) gear is for low-speed driving, usually employed when descending long slopes to maintain the car in the lowest gear. The M (Manual) gear is only available in automatic transmissions with a manual mode, allowing the driver to switch to manual gear shifting by engaging M and then adjusting the gears manually.
8
3
Share

How to Adjust the Time on the Lavida Car Display Screen?

Method to adjust the time on the Lavida car display screen: 1. Insert the key and turn the ignition switch to the ON position to illuminate the instrument panel; 2. There are two buttons on the instrument panel, the left one is the time symbol, and the right one is the SET button; 3. Locate the SET button on the instrument panel to start adjusting the time. Select the hour value, then use the volume adjustment button on the steering wheel to adjust the value to the correct hour; 4. Next, adjust the minute value to one minute ahead of the correct time. Watch your phone and press OK when it jumps to the next minute. The Lavida is a compact sedan launched by SAIC Volkswagen, with dimensions of 4605mm in length, 1765mm in width, and 1460mm in height, and a wheelbase of 2610mm. It is equipped with a 1.4L turbocharged engine and a 1.5L naturally aspirated engine.
11
1
Share

What is the RX5?

RX5 is the Roewe RX5 under SAIC Motor. Taking the 2020 Roewe RX5 as an example, it is a compact SUV with body dimensions of 4556mm in length, 1855mm in width, and 1719mm in height, and a wheelbase of 2700mm. The Roewe RX5 is equipped with a 1.5T in-cylinder direct injection turbocharged engine, with a maximum power of 124kw and a maximum torque of 250nm, featuring an aluminum alloy cylinder head and block, paired with a 6-speed manual transmission (MT). This vehicle adopts a front-engine, front-wheel-drive layout, with a front suspension of MacPherson independent suspension and a rear suspension of multi-link independent suspension.
18
5
Share

How to Set the Loop Mode for a Dash Cam?

Method to set the loop mode for a dash cam: In the "Settings" option of the dash cam, find "Loop Recording" and confirm. Under "Loop Recording," there will be setting options such as 1 minute, 3 minutes, 5 minutes, etc., which refer to the duration of each video segment. Loop recording means that when the memory card is full, the earlier recordings will be automatically overwritten to achieve continuous recording. The loop recording duration should not be too long or too short; it is recommended to choose 2 to 3 minutes. Recording the entire drive as one segment not only occupies a large amount of memory, requiring frequent manual deletion to continue use, but also risks deleting important videos along with others. Loop recording effectively solves this issue by dividing a complete video into several small segments, which are automatically overwritten when the memory is full, starting with the oldest segments.
13
1
Share

How to Use Hill Start Assist?

How to use hill start assist: When parking on a slope with the gear in drive, releasing the brake pedal will automatically activate the hill start assist. In some vehicles, this function activates automatically after pressing the brake pedal. Hill start assist allows the car to start on a slope without using the handbrake and prevents rolling back, but the braking time is only a few seconds. There is still a risk of rolling back if the throttle is not applied in time. How hill start assist works: When starting on a slope, the moment the foot leaves the brake pedal to press the accelerator, the HAC system automatically maintains brake oil pressure for two to three seconds, equivalent to the brake still being pressed, so the car will not roll back. When the accelerator is pressed, HAC's control of the brake automatically ends, and it does not release all braking force at once but gradually reduces the braking force, allowing the car to start as the driver presses the accelerator.
2
0
Share

What does a yellow triangle with an exclamation mark inside mean?

A yellow triangle with an exclamation mark inside is a common fault warning light. Common vehicle faults indicated by this light include overheating of the dry dual-clutch transmission, intervention or malfunction of the fuel cut-off system, parking sensor failure, exterior bulb failure, engine oil pressure sensor failure, traction control system warning or malfunction, etc. Whenever any of these faults occurs, the triangular exclamation mark light on the dashboard will illuminate. It could also indicate a fault in the vehicle's traction control. This indicator light represents the status of the vehicle's traction force and is the ground adhesion control system indicator. If it lights up, the traction control system on the vehicle should be turned off. If this light remains illuminated while the traction control system is active, it indicates a problem with the vehicle's TCS (Traction Control System), which requires prompt inspection and repair.
5
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.