···
Log in / Register

What to Do When You Fail the Driving Test (Subject 3) Twice and Lose Confidence?

3 Answers
JuliaLynn
07/29/25 11:03pm
For those who have failed the driving test (Subject 3) twice, it is important to be good at summarizing and maintaining a positive mindset. Here are some relevant suggestions: 1. Be Good at Summarizing: Currently, the one-time pass rate for driving tests is not very high, as this subject is a practical one. Therefore, it is quite normal for students to fail Subject 3 twice. Test takers should have confidence in themselves, record the reasons for their failures, and promptly summarize whether the issue is due to inadequate skills or psychological factors, such as excessive nervousness or external interference like traffic or crowds. It is essential to learn from reflection and avoid making the same mistakes next time. 2. Maintain a Good Mindset: A positive mindset is crucial during the Subject 3 test. Try to avoid nervousness, as it can lead to operational errors. Additionally, having solid driving skills and being proficient in handling the vehicle are important. When encountering emergencies, one should slow down, wait for an opportunity to change lanes, or stop and wait if no opportunity arises until it is safe to proceed.
Was this review help?
18
4
Share
DiEmersyn
08/16/25 12:59am
I think failing the driving test twice is quite common, and many people experience it. The key is to analyze the reasons for failure, such as identifying where mistakes were made during the test. Perhaps it's overlooking details, like not checking the rearview mirror when changing lanes or failing to align properly when parking. When I was learning to drive, I also performed well in practice but got nervous and flustered during the actual test. I recommend simulating real test scenarios more often, like having a friend sit beside you as an examiner and repeatedly practicing weak areas. After each failed attempt, jot down the problem points and don’t rush to retake the test immediately—take a few days to reflect. Over time, your proficiency will improve, and confidence will gradually return. Keep practicing a few more times, and you’ll pass naturally. Getting a driver’s license isn’t something to rush; take your time to refine your skills.
Was this review help?
10
3
Share
Expand All
RemingtonDella
10/18/25 6:30am
I understand that failing repeatedly has shaken your confidence, but don't lose heart. Adjusting your mindset is crucial: during the test, don't focus on the outcome, stay present with your operations. I've seen many students like this who later relieved stress through deep breathing and visualizing success scenarios. Talk to your instructor to strengthen weak areas, like hill starts or reverse parking. Choose quieter times for practice to minimize distractions. Take it slow—failure is an inevitable part of learning to drive, and it helps build solid skills. Persist and try one more time; you might just pass with a pleasant surprise.
Was this review help?
15
2
Share
Expand All
More Forum Discussions

Is Wheel Alignment Necessary After Changing Tires?

Wheel alignment is not necessary after changing tires; only wheel balancing is required. Situations that do require wheel alignment include: 1. When the vehicle's steering wheel feels heavy, shakes, pulls to one side, is off-center, or doesn't return to position while driving; 2. Uneven tire pressure and tread wear; 3. Wheel vibration or wobbling; 4. The vehicle pulling to one side. The benefits of wheel alignment are: 1. Enhanced driving comfort; 2. Extended tire lifespan; 3. Improved straight-line stability; 4. Reduced wear on chassis suspension components; 5. Increased driving safety. The principle behind wheel alignment is to adjust the vehicle's four-wheel parameters to ensure optimal driving performance and reliability.
3
5
Share

What are the handling methods for a tire blowout on the highway?

Highway tire blowout handling methods are: 1. Maintain control of the steering wheel and gradually reduce speed; 2. Gradually move the vehicle to the right and stop; 3. Quickly place a warning triangle 100 meters behind the vehicle; 4. Replace with the spare tire and promptly exit the highway. Causes of tire blowouts include: 1. Tire leakage; 2. Excessive tire pressure; 3. Insufficient tire pressure; 4. Severe tire wear. Tire maintenance methods include: 1. Regularly remove debris from tire treads; 2. Periodically check tire pressure; 3. Inspect tire wear and replace when necessary; 4. Promptly repair punctures; 5. Immediately stop and check tire condition if abnormal tire conditions occur while driving.
14
0
Share

What causes abnormal engine noise after an oil change?

The reasons for abnormal engine noise after an oil change are: 1. Overfilling of engine oil; 2. Using oil with inappropriate viscosity. The procedure for changing engine oil is: 1. Start the engine to warm up and bring the transmission to operating temperature; 2. Remove the drain bolt to collect the old oil from the transmission; 3. After draining the old oil completely, remove the oil pan to replace the transmission filter; 4. Reinstall the oil pan and tighten the drain plug; 5. Add new transmission oil; 6. Start the vehicle and shift through all gears; 7. Check the automatic transmission fluid level and adjust if necessary. Precautions for oil change include: 1. Perform the change when the engine is warm to ensure complete drainage of old oil; 2. Add the correct amount of new oil; 3. After adding oil, start the engine to check for leaks, then run the engine for 3 minutes to confirm the oil level reaches the normal mark.
3
5
Share

What is the car depreciation rate?

Car depreciation rates are typically 11% for the first 3 years, 10% from the 4th year onward, and 9% for the subsequent 3 years. Below are the specific details about car depreciation rates: 1. Regulations: The depreciation rate is 11% for the first 3 years, 10% from the 4th year onward, and 9% for the subsequent 3 years. For the first 3 years, the annual depreciation rate is 11%, resulting in a total depreciation of 33% over 3 years. From the 4th year onward, the annual depreciation rate is 10%, leading to a total depreciation of 40%. For the subsequent 3 years, the annual depreciation rate is 9%, resulting in a total depreciation of 27%. According to tax regulations, the depreciation period for passenger cars is 5 years, with a residual value rate of 5%. 2. Impact: The higher the depreciation rate, the worse the vehicle's condition and the lower its residual value.
17
5
Share

What is Section Speed Measurement?

Section speed measurement refers to a method of detecting the average speed of motor vehicles passing through a road section (speed measurement section) between two adjacent speed monitoring points. Functions of the section speed measurement system: By setting up two cameras at two adjacent monitoring points on the same road section, a monitoring and snapshot system is established. This system conducts real-time monitoring and snapshots of vehicles passing through the checkpoint area twice to obtain information such as vehicle speed, traffic flow, license plate number, color, approximate physical dimensions, and driver characteristics. The collected information is then transmitted through a network to the database of the public security traffic command center and traffic control sub-center for data storage, query, comparison, and other processing. Advantages of section speed measurement: High measurement accuracy, stable and reliable speed detection, more comprehensive recorded data. Due to detector limitations, single-point checkpoint devices cannot guarantee 100% image capture of passing vehicles. It offers high measurement efficiency and diverse speed measurement capabilities.
4
1
Share

What is the real reputation of the Haval M6 Plus?

Haval M6 Plus is a car with strong overall performance and balanced capabilities, without any obvious shortcomings. Here is a detailed introduction to the Haval M6 Plus: 1. Largest in-class space: If comparable models are like one-bedroom apartments, then the Haval M6 is a two-bedroom apartment. This analogy is not an exaggeration. Due to adopting the chassis of the first-generation H6, the M6 has a body length of 4664 mm, which is generally more than 12 cm longer than comparable models. 2. Luxurious configurations: Equipped with a wet dual-clutch transmission and double-wishbone independent suspension. It also features practical configurations such as tire pressure display, 360-degree panoramic imaging, auto hold, hill start assist, hill descent control, keyless entry, steering wheel-mounted paddle shifters, and OTA upgrades.
15
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.