What to Do When Windows Fog Up While Driving in the Rain?

2 Answers
MacTanner
08/29/25 6:56am
Turn on the air conditioning cold air, direct the air vents towards the window position, set the fan speed to maximum, and lower the temperature to remove the fog inside the car. Below is a related introduction: 1. Causes of Fogging: The main reason for fogging inside the car is the temperature difference. When the temperature inside the car is higher than outside, the windows are prone to fogging. Another reason is the high humidity inside the car, combined with the warm breath exhaled by passengers. When this warm air meets the cold glass, it condenses, leading to window fogging. 2. Car Air Conditioning: The car air conditioning system (air-conditioning-device), commonly referred to as car AC, is used to regulate and control the temperature, humidity, air cleanliness, and airflow inside the car cabin to optimal conditions. It provides a comfortable working environment for the driver and plays a crucial role in ensuring safe driving as a ventilation device.
Was this review help?
8
1
Share
AlexAnn
09/11/25 4:32am
Driving in foggy conditions on rainy days is quite tricky, and I've dealt with it countless times. The first step is to immediately press the front windshield defogger button, usually the one with a fan icon and wavy lines. Then turn on the A/C switch, as the air conditioning can quickly dehumidify and reduce interior moisture. At the same time, increase the fan speed, preferably to the maximum setting, directing it toward the windshield. Avoid setting the temperature too high—cold air is more effective. If the fog persists, crack open a window slightly to allow air exchange between the inside and outside, reducing the temperature difference; but be cautious of rain, keeping it open for just about ten seconds. In emergencies, such as thick fog impairing visibility, I quickly slow down and pull over to a safe area, using a dry car cloth or tissue to manually wipe the inside—never wipe while driving. For prevention, keep an anti-fog spray handy and apply it periodically to the interior glass to form a protective layer. Also, check the door and sunroof seals—damaged or leaking seals can let moisture in, so keeping the interior dry helps minimize fogging. These methods are simple and practical, and combining them usually does the trick.
Was this review help?
1
4
Share
Expand All
More Forum Discussions

How to Set the Lock Car Horn Sound for Tayron?

First, sit in the car, press the brake, and shift the gear to the P position; release the brake, close the door, and press the one-touch start button twice to activate the vehicle system. Press and hold the lock button on the driver's door for 6 seconds; when you hear the car horn sound twice, the lock car horn function for Tayron is successfully set.
7
1
Share

Where is the ID.4 produced?

Volkswagen's all-electric SUV ID.4 will be mass-produced at the Zwickau plant in Germany and the Anting area in Shanghai. Vehicles produced at this plant will be supplied to Europe and North America. In addition, the Volkswagen ID.4 will also be domestically produced by FAW-Volkswagen and SAIC Volkswagen. The ID.4 is Volkswagen's new all-electric SUV model. Currently, there are two models of ID.4 available: the ID.4 CROZZ and the ID.4 X. ID.4 CROZZ: Overall dimensions 4592mm*1852mm*1629mm, maximum range of 425KM, maximum power of 125kW, maximum torque of 310Nm, motor maximum horsepower of 170Ps, wheelbase of 2765mm, trunk volume of 512L, curb weight of 1945kg, front suspension using MacPherson independent suspension, rear suspension using multi-link independent suspension, a compact SUV model. ID.4 X: Overall dimensions 4612mm*1852mm*1640mm, maximum range of 425KM, maximum power of 125kW, maximum torque of 310Nm, motor maximum horsepower of 170Ps, wheelbase of 2765mm, trunk volume of 484L-1546L, curb weight of 1960kg, front suspension using MacPherson independent suspension, rear suspension using multi-link independent suspension, a compact SUV model.
10
0
Share

How to use G72 for facing operation?

This command is a rough turning cycle for facing operations. The tool path of G72 is positioned along the Z-axis, with the X-value used for turning. W represents the depth of cut per pass along the Z-axis. It indicates the cutting depth from the cycle starting point to the endpoint for each pass. R is the retract amount, which is the distance the tool retracts after each cutting pass. P denotes the starting block number of the cycle, which is the program where the contour begins.
3
4
Share

What to Do When Your Car Breaks Down at Night and Needs to Stop?

When driving at night, visibility is affected by the darkness. If your car breaks down and needs to stop, ensure the safety of yourself and others on the road. Try to park in a safe area, turn on the hazard warning lights, side marker lights, and rear position lights, and set up a warning sign behind the vehicle.
16
2
Share

How to undergo inspection for 11 points deducted from a B2 license?

Before the annual inspection, you must participate in no less than three hours of study on road traffic safety laws and regulations, civilized driving practices, emergency handling, and other related knowledge. You must also receive case-based warning education on traffic accidents to pass the driver's license inspection. Factors such as road traffic safety violations, traffic accident handling status, and physical condition will be reviewed. If violations or traffic accidents remain unresolved, physical conditions do not meet driving license requirements, or mandatory education and exams are not completed as required, the inspection will not be approved.
19
4
Share

How to Adjust the A6L Audio System for Optimal Sound Quality?

Access the 'Sound' option from the MMI main menu. Under this level, there are four sub-menus, with the latter ones being relatively easier to understand. Select DSP, the first option is the DSP menu exclusive to BOSE audio systems. The first setting in DSP is sound field positioning. It can be set to 'All' or 'Front', depending on the number of passengers in the car. If only the front seats are occupied, select 'Front'; if the car is full, choose 'All'. Through the combination of 5.1-channel speaker outputs, different sound field positioning effects are simulated.
9
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.