What to Do When Wey Car Networking Has No Internet Connection?

2 Answers
DelLandon
07/24/25 5:24am
Check if the mobile network switch is turned on and verify whether the vehicle's network signal is normal. If there is no signal, try moving to an area with better signal reception. Refresh the network connection. It might be due to unpaid fees, so it is recommended to check the payment status.
Was this review help?
9
0
Share
CassandraDella
08/11/25 1:03am
I just encountered the issue of Wey's car connectivity losing internet. Generally, start by checking the network settings—go into the car's system to see if the network option is disabled or if airplane mode is selected; it's common for owners to accidentally misconfigure these. Then, try restarting the system, similar to holding down the restart button on a phone. SIM card issues are also frequent—the built-in SIM might be out of credit, loose, or expired, requiring contact with the carrier for renewal. Antenna failures are rare, but signal weakness can be caused by dust accumulation or displacement, especially during rain or snow. Don't overlook software bugs; update the app or download the latest firmware to fix them. Also, check if the vehicle's location has poor signal coverage; use a mobile hotspot as a temporary substitute. From a safety perspective, losing internet affects navigation and emergency calls—if an incident occurs, don't panic and fiddle around; pull over to resolve it. For prevention: check settings quarterly, clean the antenna area, and don't wait until an urgent need arises. In short, most cases can be self-repaired, but if not, head to a professional shop for diagnosis.
Was this review help?
3
1
Share
Expand All
More Forum Discussions

What Are the Reasons for a Car Not Starting and Making Abnormal Noises?

The reasons for a car not starting and making abnormal noises are: 1. Insufficient battery power; 2. The battery voltage is too low; 3. Battery failure; 4. Fuel supply system failure; 5. Ignition system failure; 6. Incorrect gear position. The solutions for a car not starting and making abnormal noises are: 1. Charge the battery; 2. Replace the battery; 3. Shift to P gear before starting; 4. Replace the ignition system; 5. Replace the fuel supply system. The methods to deal with a car not starting are: 1. Manual push-start method: Engage first gear and slowly release the clutch to use the wheel's rotation force to drive the engine flywheel; 2. Jumper cable assistance method: Connect the cables to both the non-starting vehicle and the rescue vehicle.
5
2
Share

Will a Car Get Damaged When Hitting a Pothole?

Hitting a pothole generally has minimal impact on a car. Below are the effects of driving over potholes on a vehicle: 1. Tires and Rims: When a car suddenly encounters an uneven road surface at high speed, the wheels bear the greatest impact force. Excessive speed can directly cause tire blowouts, and in severe cases, may even deform the rims. If you accidentally drive over a large pothole, always remember to inspect the wheels for damage as soon as it is safe to do so. 2. Suspension System: Besides potential wheel damage, the suspension system is also affected after hitting a large pothole. If no significant damage is found on the tires or rims, it indicates that the impact force has been absorbed by the suspension. Repeatedly driving over potholes can cause considerable wear to the suspension and shock absorbers, so it’s best to avoid potholes whenever possible.
19
2
Share

Can White Spray Paint Cover Black?

White spray paint can cover black, but it requires at least three coats for full coverage. Here are some precautions when using spray paint: 1. Shake: Shake the paint evenly before spraying, avoiding excessive shaking. 2. Surface: Ensure the surface to be painted is absolutely clean and cleaned before use. 3. Spray upright: Always spray the paint upright, never upside down. 4. Shake the bottle repeatedly: Before spraying, shake the bottle repeatedly to fully mix the acrylic inside. Maintain a distance of about 20 cm during spraying; too close may cause bubbles and buildup, while too far may waste paint. 5. Avoid contamination: During spraying, guard against dust and other contaminants, as small insects can also be troublesome. Pay attention to ambient temperature and humidity to prevent exposure to direct sunlight, excessively low temperatures, or overly dry conditions. When using spray paint, wait a few minutes between coats and repeat several times.
13
5
Share

Are Car Horns Universal?

Car audio horns include both universal horns and vehicle-specific horns. Below is a detailed introduction to car horns: 1. Function: The horn is the sound signal device of a car. During driving, the driver emits necessary sound signals as required and regulated to warn pedestrians and alert other vehicles, ensuring traffic safety. It is also used for urging movement and conveying signals. 2. Working Principle: The air horn operates by using the airflow of compressed air to vibrate a metal diaphragm, thereby producing sound. Therefore, it can only be used on vehicles equipped with an air compressor.
6
5
Share

Why Does the Engine Malfunction Light Come On?

There are mainly 7 reasons why the engine malfunction light comes on: Sensor failure: The sensors mentioned here include coolant temperature, crankshaft position, air flow, intake air temperature, oxygen sensors, etc. When these sensors are damaged, have poor contact, or experience signal interruption, the vehicle's ECU cannot accurately obtain engine data, which will cause the engine malfunction light to come on. Fuel quality issues: If fuel and engine oil are not added as required by the manufacturer, it may cause engine wear and trigger the malfunction light. Poor mixture combustion: Poor mixture combustion can lead to engine carbon deposits or knocking. When detected by the oxygen sensor and reported to the ECU, the malfunction light will illuminate as a warning. Spark plug failure, ignition coil failure, fuel pump failure, and fuel line blockage can all cause poor mixture combustion in the engine. Turbocharging issues: The intake turbocharging pipeline and turbocharger can also cause the engine malfunction light to come on. The most common issue is turbocharger damage, accompanied by symptoms such as oil leaks, excessive oil consumption, reduced power, metallic noises, and blue or black smoke from the exhaust pipe. Intake issues: If the vehicle's intake system has problems, it may cause engine pipeline blockage, and in severe cases, trigger the engine malfunction light. A dirty air filter that is not cleaned regularly can lead to intake issues. Exhaust issues: Exhaust system failures can also cause the engine malfunction light to come on. Rear oxygen sensor failure, catalytic converter failure, exhaust camshaft and bearing failure are all causes of exhaust problems, with the catalytic converter being the most common. Using leaded gasoline, lead or silicon-based lubricant additives, physical damage to the catalytic converter, or engine fuel supply system failures can easily cause catalytic converter issues. Anti-theft system failure: If the vehicle's electronic anti-theft system malfunctions or the anti-theft controller does not match the engine electronic controller, the anti-theft system can also cause the engine to malfunction and trigger the engine malfunction light. If the engine malfunction light comes on, follow these steps: First, check if the engine is running normally and whether there are issues such as shaking or smoke. If so, avoid restarting the engine. Note: Do not restart the engine if the red warning light is on. If the engine can be started, turn it off and wait for 5-10 minutes. Without pressing the brake, press the start button once or turn the key halfway to the "on" position without depressing the clutch. The vehicle will enter self-check mode after powering on. Wait for 5-10 seconds and observe whether the malfunction light on the dashboard turns off. If the malfunction light remains on, visit a service center as soon as possible. The service center can use a portable diagnostic tool to read the fault codes, obtain fault information, and perform targeted repairs.
8
0
Share

What is the reason for the abnormal automatic parking in BMW 525?

BMW 525 automatic parking abnormality is caused by issues in the control circuit. Below is an introduction to the related content of the BMW X3: 1. Power: The BMW X3 is equipped with a 2.0T turbocharged engine. BMW offers three power variants of this 2.0T turbocharged engine, namely the 25i, 28i, and 30i. 2. Engine Introduction: The 25i model's engine has a maximum power of 135kW and a maximum torque of 290Nm. The 28i model's engine has a maximum power of 165kW and a maximum torque of 310Nm. The 30i model's engine has a maximum power of 185kW and a maximum torque of 350Nm.
9
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.