What to Do When Water Leaks into the Passenger Side of the Car?

How to open and replace the battery of Dongfeng Fengshen AX7 key?

Dongfeng Fengshen AX7 key opening and battery replacement method: 1. Remove the silver decoration of the key; 2. Use a flat-head screwdriver to pry open the key along the gap at the edge of the shell to see the battery; 3. Take out the old battery and replace it with a new one; 4. Reassemble the shell in reverse order. The Dongfeng Fengshen AX7 is a compact SUV equipped with two engines, a 2.0L and a 2.3L naturally aspirated engine. The maximum power of the 2.0L naturally aspirated engine is 110kw, and the maximum power of the 2.3L naturally aspirated engine is 125kw.

11

4

Share

Why is there a strange noise when shifting into P gear?

Shifting into P gear with a strange noise is the sound of gear meshing, which is a normal phenomenon. Structure of P gear locking: This sound is caused by the interaction between the gear on the internal output shaft of the transmission and the locking pin in the P gear locking structure. This is why the vehicle cannot move forward or backward when shifted into P gear, and the force increases appropriately with steeper slopes. Solution: For this situation, you can first stop the car completely, engage the manual brake (handbrake), and then shift into P gear for better results. Additionally, it is recommended to check the performance of the engine pawl. If its performance deteriorates, it may cause the above phenomenon.

4

2

Share

What is the Function of a Fuel Tank Pressure Sensor?

The function of a fuel tank pressure sensor is to convert the pressure of the fuel into an electrical signal and transmit it to a display instrument or signal acquisition device. The fuel tank pressure sensor is a commonly used pressure transmitter in industrial practice, widely applied in various industrial automation environments. It is involved in numerous industries such as petroleum pipelines, water conservancy and hydropower, railway transportation, intelligent buildings, production automation, aerospace, military industry, oil wells, power generation, ships, machine tools, pipeline ventilation, and boiler negative pressure. The working principle of the fuel tank pressure sensor is that the pressure acts directly on the diaphragm of the sensor, causing the diaphragm to produce a micro-displacement proportional to the medium pressure, which changes the resistance of the sensor. This change is detected by electronic circuits, and a standard signal corresponding to this pressure is converted and output.

9

5

Share

Where is the Envision fuse box located?

The Envision fuse box is located in: 1. The trunk; 2. The engine compartment; 3. Behind the front passenger seat panel. Taking the 2021 Envision as an example, its body structure is a 5-door, 5-seat SUV with body dimensions of: length 4694mm, width 1839mm, height 1686mm, wheelbase 2750mm, fuel tank capacity 66l, and curb weight 1610kg. The 2021 Envision features a front MacPherson independent suspension and a rear multi-link independent suspension. It is equipped with a 1.5L turbocharged engine, delivering a maximum horsepower of 169ps, maximum power of 124kw, and maximum torque of 250nm, paired with a 7-speed dual-clutch transmission.

4

1

Share

The Impact of Using the Wrong Fuel in a Car

If a car uses the wrong fuel for a long time, it can cause damage to the engine. Here are the hazards of using the wrong fuel: 1. Using lower octane fuel instead of higher octane fuel: In this case, the car may experience insufficient power and higher fuel consumption. However, the owner does not need to worry too much, as long as it is not a long-term practice, it will not cause significant damage. 2. Adding diesel to a gasoline car If diesel is accidentally added to a gasoline car, the vehicle usually cannot start. Since diesel has a lower ignition point, gasoline ignites through spark, while diesel ignites through compression. The ignition system will directly ignite the diesel, leading to knocking and engine damage.

11

3

Share

What Are the Reasons for No Response When Locking the Car with the Key?

The reasons for no response when locking the car with the key are: 1. Strong magnetic field interference signals around the car; 2. Car malfunction; 3. Dead battery or poor battery contact; 4. Aging antenna of the car's remote transmitter; 5. Failure of the time control module in the remote key. Solutions for no response when locking the car with the key: 1. Check the battery circuit or replace the battery; 2. Check the condition of aging circuits; 3. If the remote key doesn't work, use the mechanical key to lock the car; 4. Check the lock block and the condition of open or short circuits in the control circuit; 5. Park the car in another location and try again to avoid magnetic field interference signals.

8

3

Share

What to Do When Water Leaks into the Passenger Side of the Car?

How to open and replace the battery of Dongfeng Fengshen AX7 key?

Why is there a strange noise when shifting into P gear?

What is the Function of a Fuel Tank Pressure Sensor?

Where is the Envision fuse box located?

The Impact of Using the Wrong Fuel in a Car

What Are the Reasons for No Response When Locking the Car with the Key?

What is the reason for the absence of a seatbelt reminder sound in the Geely Boyue?

What is a tanker truck used to transport?

How to Use the Fog Lights on Volkswagen Jetta?

What to Do If There's Water in the Gasoline?