What to Do When Vehicle Transfer Shows Unrefunded Transaction Records?

1 Answers
AlessandraMarie
07/30/25 2:18am
Obtain a "Used Motor Vehicle Sales Contract" and have both parties fill in their respective information. With all the aforementioned documents, you can proceed to handle the "transfer acceptance". Drive the vehicle directly to the inspection area for transfer, where staff will conduct the inspection. Obtain the vehicle photo and affix it to the inspection record form. After getting a number from the ticketing machine, queue up with the relevant materials to pay the transfer fee. The vehicle owner should take the relevant files back to the local vehicle management office where the vehicle will be registered, submit them as required, and complete the vehicle registration procedures.
Was this review help?
17
5
Share
More Forum Discussions

What to Do When a New Energy Vehicle Runs Out of Power on a Long Trip?

Solutions for a new energy vehicle running out of power on a long trip are as follows: 1. Notify the insurance company for towing service: If you have purchased commercial insurance annually, most insurance companies provide customers with 1-2 free towing services per year. If you run out of power on the road, you can call the insurance company's customer service to arrange for a tow truck. Pure electric vehicles should plan their route before entering the highway to avoid running out of power midway. 2. Notify the manufacturer for rescue: If the vehicle runs out of power on the highway, the manufacturer can send a charging vehicle or tow truck for assistance. Generally, manufacturers, like insurance companies, offer a certain number of free rescue services per year, with additional services requiring payment by the owner. 3. Contact a mobile charging service: Mobile charging vehicles typically use gasoline generators for power supply, but this service is usually expensive. Therefore, it's advisable to locate the nearest charging station during charging and end the session once the vehicle's range can reach it, saving on additional costs.
14
4
Share

Do You Need to Press the Brake When Downshifting from 4th to 3rd Gear?

Downshifting from 4th to 3rd gear does not require pressing the brake. Below are detailed techniques for manual transmission gear shifting: 1. Downshift after Deceleration: Before upshifting, increase the vehicle speed; before downshifting, release the accelerator to reduce the speed first. Always fully depress the clutch pedal before shifting, and operate the gear lever with light, quick, gentle, and precise movements. 2. Master the Timing of Gear Shifting: Shift gears when the engine reaches around 2000 RPM. First press the accelerator, then depress the clutch to prevent forced disengagement, followed by shifting. Downshift based on vehicle speed; generally, downshift when the engine RPM drops below around 1500 RPM. 3. Ensure Smooth Shifting Actions: Fully depress the clutch in one motion and shift gears decisively. Familiarize yourself with the gear positions. If unable to engage a gear, shift to neutral, release the clutch slightly, then depress it again to engage the gear.
17
0
Share

Can a sedan be equipped with a roof rack?

You can install a roof rack on your car by yourself, but the height from the roof should not exceed 0.5 meters. Here is some relevant information: Function: Car roof racks combine both aesthetic and practical functions, especially for the currently popular urban SUVs. They can make the car look cooler and also come in handy during trips. They can carry items that don't fit in the trunk, as long as the owner secures the cargo properly, especially by adding a cargo net, allowing for more items to be transported. Precautions: After installation, the roof rack does not need to be frequently removed because, for cars with ordinary roofs, frequent installation and removal of the rack may damage the paint. For cars that use pre-installed mounting points, frequent removal and installation could harm the screws at the mounting points. Therefore, although roof racks are removable, when choosing one, you should still be prepared to keep it fixed on the roof for a long time.
9
1
Share

Should the Air Conditioning Be Turned Off Before Turning Off the Car?

It is necessary to turn off the air conditioning before turning off the car. If the air conditioning is not turned off before shutting down the engine, the air conditioning will automatically turn on the next time the engine is started, which unnecessarily increases the load on the engine. The correct procedure is to first turn off the air conditioning, then switch to the external circulation mode, allowing the blower to dry the water droplets on the evaporator before locking the car. The entire process takes about two minutes. Below are some tips for air conditioning maintenance: 1. Comprehensive air conditioning inspection: When using the air conditioning for the first time in summer, it is advisable to check the air conditioning system, such as inspecting the refrigerant through the reservoir, checking if the air filter is too dirty, and whether there are any foreign objects on the radiator. 2. Pay attention to air conditioning cleaning: The air filter should be replaced regularly to prevent moldy odors. Additionally, the condenser should be cleaned periodically, and for thorough cleaning, the radiator should be removed.
19
0
Share

What is the torque specification for Volvo XC60 axle shaft bolts?

Volvo XC60 axle shaft bolts require a uniform torque of 120 to 150 N·m. Below is an introduction regarding axle shaft bolts and installation precautions: Axle Shaft Bolt Introduction: Axle shaft bolts are double-ended studs that secure the axle shaft to the wheel hub. These bolts typically feature coarse threads on one end and fine threads on the other. The coarse-threaded end is pre-installed into the wheel hub before mounting the axle shaft. The fine-threaded end requires installation of a conical spring washer, which serves to eliminate clearance between the bolt hole and axle shaft bolt, preventing vibration-induced loosening during vehicle operation. Axle Shaft Bolt Installation Precautions: Axle shaft bolts have strict usage requirements. The bolts must be pre-installed into the wheel hub and fully seated, with conical spring washers being mandatory. Nuts must be tightened to specified torque values (torque specifications vary by vehicle model).
13
2
Share

Where is the Windshield Wiper?

The windshield wiper is located on the right side of the steering wheel. Pushing it upwards once activates intermittent wiping, and the further you push it up, the faster the speed. Pulling it all the way down stops the wiper. The wiper assembly includes components such as the motor, reducer, four-bar linkage mechanism, wiper arm spindle, and wiper blade assembly. Below is relevant information about windshield wipers: 1. Wiper Principle: The power source of the wiper comes from the motor, which is the core of the entire wiper system. The quality requirements for the wiper motor are quite high. It uses a DC permanent magnet motor, and the wiper motor installed on the front windshield is generally integrated with the worm gear mechanical part. The worm gear mechanism serves to reduce speed and increase torque, with its output shaft driving the four-bar linkage mechanism, which converts continuous rotational motion into a left-right oscillating motion. 2. Wiper Function: The wiper is a device used to remove raindrops and dust attached to the vehicle's windshield, improving the driver's visibility and enhancing driving safety.
9
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.