What to Do When Vehicle Demerit Points Exceed Three Driver's Licenses?

How is the rear seating space in the Tang?

The Tang features a 2+3+2 seating layout in the rear. Seating layout characteristics: The second-row seats can slide forward and backward and adjust the backrest angle. The third-row seats are positioned relatively low, while the rear center armrest is higher for comfortable support. There are two USB ports for rear passengers to charge their phones. The second-row seats are designed for three passengers and can adjust both the fore-aft position and backrest angle. When the second-row seats are moved to the foremost position, there's about three fingers' width of legroom remaining (with front seats unchanged). When adjusted to the rearmost position, the rear seats offer ample space. Rear space dimensions: The trunk has a length of 2005mm, width of 1195mm (narrowest point 1005mm), and height of 760mm. With the third row folded down, the length extends to 1055mm. When using the third row, the available length reduces to 300mm. With the third-row seats upright, there's essentially no remaining cargo space in the trunk. When the third row is folded down, the storage volume becomes significantly larger.

10

0

Share

Can the Baojun 310 Seat Five People?

Baojun 310 can seat five people. Space aspects: In terms of space design, the Baojun 310 measures 4032mm in length, 1680mm in width, and 1470mm in height, with a wheelbase of 2550mm. Additionally, the Baojun 310 offers a maximum rear-row lateral space of 1233mm and a maximum rear-row longitudinal space of 892mm, meeting the seating needs of three passengers in the rear. Safety aspects: The Baojun 310 is equipped with an ABS anti-lock braking system + EBD brake force distribution system, which ensures vehicle stability and safety during emergency braking, preventing dangerous situations such as skidding or loss of control, thereby safeguarding users' travel.

2

4

Share

What are the symptoms of a misfiring cylinder in the Lavida?

The symptoms of a misfiring cylinder are as follows: Unstable idle speed: The engine may shake abnormally. Generally, the more cylinders an engine has, the smoother it runs. When a cylinder misfires, the vehicle's idle speed may fluctuate up and down, or the engine may shake abnormally. Significant power loss: A car's power is generated by the combustion of compressed air and fuel in the engine cylinders. If a cylinder misfires, the fuel will not burn properly, resulting in poor acceleration. Difficulty starting the vehicle: The engine may stall easily. The more cylinders that misfire, the more severe this phenomenon becomes.

7

1

Share

Why is the chassis of Jetta car making a clunking sound?

Jetta car chassis clunking sound reasons are as follows: Interference between components: Due to impact or installation of other equipment, two components affect each other. Solution: Only through reshaping repair or replacement of related components can the interference be eliminated. Loose bolts or nuts: Long-term driving on roads with poor conditions causes natural loosening of bolts; improper disassembly and installation damage the bolts; insufficient tightening torque or incorrect bolt specifications. Solution: Tighten or replace bolts and nuts. Drive shaft universal joint failure: Caused by broken dust cover or oil leakage not repaired in time; Solution: Replace the drive shaft universal joint with a new one.

6

1

Share

Does the Volkswagen Tharu have an automatic locking feature?

The Tharu is equipped with this feature. When the vehicle reaches the speed set by the computer, the locking button will automatically engage to prevent accidental door opening. Exterior of the Volkswagen Tharu: The exterior adopts the Rock-Cutting design concept, with raised lines on the ridge-like hood enhancing a sense of strength. The wide-body dual U-shaped full LED headlights tilt upwards, and the grille strips extend to the headlights. Interior of the Volkswagen Tharu: The interior features a horizontal design, using IMD material panels to elevate the premium feel. Large decorative panels integrate the instrument cluster, display screen, and air vents into a unified design.

5

4

Share

What is the 0-100 km/h acceleration time of the Audi A6L 30 FSI?

The 0-100 km/h acceleration time of the Audi A6L 30 FSI is 8.5 seconds. Wheel power of the vehicle: Everyone is familiar with the power (commonly referred to as horsepower) and torque of a car model. However, there is much more to it. The power and torque parameters commonly seen in manufacturer or model specifications actually refer to the peak data that the engine can achieve under ideal conditions. Transmission: Compared to the complex relationship between power and torque, the transmission is relatively more straightforward. Simply put, a transmission that can provide a smoother and more continuous shifting experience under full throttle conditions must have better transmission efficiency. The absence of excessive RPM drops between gears prevents power loss, allowing the engine to always operate close to the RPM point of maximum power, which is a prerequisite for achieving faster acceleration.

2

5

Share

What to Do When Vehicle Demerit Points Exceed Three Driver's Licenses?

How is the rear seating space in the Tang?

Can the Baojun 310 Seat Five People?

What are the symptoms of a misfiring cylinder in the Lavida?

Why is the chassis of Jetta car making a clunking sound?

Does the Volkswagen Tharu have an automatic locking feature?

What is the 0-100 km/h acceleration time of the Audi A6L 30 FSI?

What brand are the tires on the Geely Emgrand EC7?

Does the Mercedes GLC support CarPlay?

Where is the tow hook on the Volkswagen Polo?

Can the Volkswagen Magotan play MP4 files?