What to Do When Two Driving Test (Subject Three) Sessions Are Booked?

Is the stationary vehicle at fault in a side-swipe collision on a narrow road?

Determining whether a stationary vehicle is at fault in a side-swipe collision on a narrow road is as follows: No fault: If the vehicle had already stopped during the encounter and was still sideswiped, the other party bears full or primary responsibility when one party is not at fault. Illegal parking: If the vehicle was parked in the wrong direction (against traffic) and was sideswiped during the encounter, then the owner of the wrong-way vehicle is at fault. Information about oncoming traffic is as follows: Oncoming traffic: A traffic term referring to vehicles or trains traveling in opposite directions passing each other at a certain point. Note: Prepare in advance when encountering oncoming traffic to avoid psychological panic and operational confusion.

12

0

Share

At what water depth will the engine be flooded?

When the water depth reaches the following conditions, the engine may be flooded: Sedans: For most sedans, when the water level exceeds 20 centimeters, there is a risk of engine flooding. SUVs: For SUVs with higher ground clearance, the risk of engine flooding occurs when the water depth exceeds 30 centimeters. The consequences of engine flooding are as follows: Engine connecting rod deformation: This leads to shortened piston stroke, preventing gases from being fully compressed. Piston leakage: The piston rings lose elasticity or fail to seal properly, causing gas leakage and compressed gases to enter the crankcase. Poor sealing: When the intake and exhaust valves do not close tightly, compressed gases leak into the intake manifold and exhaust manifold.

16

4

Share

Which Mercedes-Benz model has the cheapest frameless doors?

Mercedes-Benz's most affordable model with frameless doors is the CLA-Class. Here's an extended introduction about the Mercedes-Benz CLA-Class: 1. Origin: The Mercedes-Benz CLA is the brand's first four-door coupe developed based on a compact car chassis. Recognizing the market demand for four-door coupe models, Mercedes-Benz extended its smooth and elegant roofline further downward, launching the all-new CLA to tap into the potential market of young consumers. 2. Performance: The Mercedes-Benz CLA is built on the same MFA platform as the new A-Class, featuring a stylish and dynamic exterior design. The front end largely mirrors the A-Class, but the enlarged lower air intake gives it a visually striking appearance. Additionally, the streamlined body combined with the rounded rear creates a harmonious look, achieving an impressive drag coefficient of 0.23. 3. Exterior: The front fascia adopts a sporty and aggressive design, with a vertical-slat grille, sharp and fierce headlights, distinctive LED daytime running lights, dynamic air intakes on both sides, and a sporty front bumper. The low-slung profile gives it an impactful stance, with smooth and flowing roofline and window lines, sleek black mirrors, sharply contoured door panels, and stylish alloy wheels. The rear features a youthful and sporty design, with a sporty spoiler, refined and unique taillights, and a quad-exhaust setup.

15

5

Share

What is the validity period of the driver's license after adding a driving category?

After adding a driving category, the validity period of the driver's license is as follows: No recalculation: After adding a permitted driving category and obtaining a new driver's license, the validity period of the license will not be recalculated. Scoring cycle: Additionally, the scoring cycle always starts from the initial issuance date of the original driver's license. Relevant information about adding a driving category to the license is as follows: Time limit: Those who have just obtained a driver's license (such as a motorcycle license) can only take other types of driver's license tests (for example, a car license) after one year. Notes: When registering for and taking the additional driving category test, you must bring your ID card and the previously obtained driver's license. Those who pass the test will be able to add the driving category.

3

0

Share

Will the warning light come on if there is an engine oil leak?

Generally, an engine oil leak will not cause the engine malfunction indicator light to come on, but it may trigger the oil pressure warning light. The engine malfunction indicator light can be triggered by any electrical component failure or poor connector contact in the engine. The reasons for the engine warning light to illuminate are as follows: 1. Reason one: Poor fuel quality can lead to incomplete combustion of the air-fuel mixture in the cylinders, causing the warning light to come on, and it can also easily lead to carbon buildup. 2. Reason two: Carbon deposits in the intake tract or on the piston crown can cause poor atomization, leading to incomplete combustion and triggering the warning light. 3. Reason three: During cold starts, especially when the temperature drops sharply, the warning light may come on due to the ECU's temperature correction. However, once the temperature stabilizes at a certain level, the light will usually go off. 4. Reason four: Excessive engine mileage can weaken the spark plugs' performance, leading to the warning light illuminating. 5. Reason five: Excessive carbon buildup can make ignition difficult, causing the ignition coil to fail due to reverse breakdown, resulting in poor ignition and incomplete combustion, which triggers the warning light. A distinct characteristic of this issue is severe and constant engine shaking when the ignition coil fails. If the shaking is not constant, the ignition coil can usually be ruled out. 6. Reason six: Older vehicles with significant mechanical wear may experience poor engine performance, leading to ignition issues and the warning light coming on. 7. Reason seven: Faulty sensors or the ECU itself can cause the warning light to illuminate. While there are many potential causes for the warning light, the first three reasons listed are the most common.

9

3

Share

What Causes the Upper Radiator Hose to Be Hot While the Lower Hose Remains Cool?

There are two main reasons for the upper hose being hot and the lower hose remaining cool: Thermostat: A malfunctioning thermostat that fails to open causes the cooling system to operate in a small circulation mode. Coolant Pump: If the coolant pump is not functioning, it prevents the coolant from circulating, leading to the described situation. Inspection Methods: Temperature Difference: If there is no high coolant temperature warning and the temperature difference is noticed while the vehicle is idling without moving, it is recommended to drive until the electric fan operates and then recheck for any temperature difference. Thermostat: Based on the described scenario, the thermostat is not opening, keeping the cooling system in small circulation mode. The electronic thermostat is controlled by the engine's computer based on engine temperature and load.

13

2

Share

What to Do When Two Driving Test (Subject Three) Sessions Are Booked?

Is the stationary vehicle at fault in a side-swipe collision on a narrow road?

At what water depth will the engine be flooded?

Which Mercedes-Benz model has the cheapest frameless doors?

What is the validity period of the driver's license after adding a driving category?

Will the warning light come on if there is an engine oil leak?

What Causes the Upper Radiator Hose to Be Hot While the Lower Hose Remains Cool?

Does Carburetor Cleaner Have Corrosion?

Why is there ghosting on the car's front windshield film?

Can you introduce the interior functions of the 2021 Sagitar?

What lights to use when turning at an intersection without traffic signals?