What to Do When Tire Pressure Warning Keeps Showing?

What is the fuel consumption of the Geely Vision X3?

Geely Vision X3 has a total of 3 models on sale. Among them, the 2021 PRO-1.5L-CVT Premium model, equipped with a 109 horsepower engine, has an NEDC fuel consumption of 6.1L per 100 kilometers. The 2021 PRO-1.5L Manual Elite and Manual Comfort models, both equipped with a 109 horsepower engine, have an NEDC fuel consumption of 5.9L per 100 kilometers. The fuel tank capacity of different Geely Vision X3 models is the same. The distance that can be covered with a full tank of fuel is as follows: For models equipped with a 109 horsepower engine, the fuel tank capacity is 42L, and the distance that can be covered with a full tank is 42/6.1*100=689km. For models equipped with a 109 horsepower engine, the fuel tank capacity is 42L, and the distance that can be covered with a full tank is 42/5.9*100=712km. The fuel consumption of a car is directly related to five major factors: driving habits, the car itself, road conditions, natural wind, and environmental temperature. Specific factors that can increase a car's fuel consumption are as follows: Driving habits: Aggressive driving, such as sudden acceleration, frequent overtaking, and not releasing the throttle in advance when approaching a red light, can increase fuel consumption. The car itself: Cars with larger displacement generally consume more fuel than those with smaller displacement because larger displacement usually means higher power, requiring more gasoline to burn and perform work. Cars with greater weight also consume more fuel because greater weight requires more driving torque. Road conditions: Driving on dirt roads, muddy roads, soft surfaces, or mountainous roads increases resistance and fuel consumption. Natural wind: Driving against the wind or on windy days increases the car's resistance and fuel consumption. Low environmental temperature: When the engine block temperature is low during cold starts, the injected gasoline is less likely to atomize, requiring more gasoline to be injected for combustion, thus increasing fuel consumption. Additionally, at low temperatures, the engine computer controls the use of higher RPMs to warm up the car, which also increases fuel consumption.

2

Share

How many years is the validity period before taking the Subject 1 test for a driver's license application?

The validity period before taking the Subject 1 test for a driver's license application is indefinite. After passing Subject 1, the validity period for the driver's license examination is three years. Subject 1 test content: Basic knowledge of motor vehicles; laws, regulations, and road traffic signals; safe driving and civilized driving basics; fundamental knowledge related to motor vehicle driving operations. Passing criteria for Subject 1: The total test duration for Subject 1 is 45 minutes. The test consists of 100 questions, including true/false and multiple-choice questions, with a full score of 100 points. A score of 90 or above is required to pass. The test questions are randomly selected and combined by the computer-based driver examination system according to the proportion specified in the "Motor Vehicle Driver's License Work Regulations." Subject 1 test procedure: Follow the instructions of the staff and collect your driving school file in order in the waiting area; Carry and present your ID card for inspection by the supervising officer; Mobile phones must be turned off upon entering the examination area; No loud noise is allowed in the examination area; Regulation textbooks are not allowed in the examination area (or should be placed in your bag); After the test, keep your ID card safe and submit the file to the "Document Submission Window" at the front of the examination area; Candidates who pass the test should sign under the guidance of the staff at the exit before leaving the examination area; Candidates who fail the test may leave the examination area and wait for notification from their driving school regarding the retake schedule.

9

3

Share

What Are the Common Spark Plug Failures?

Common causes of spark plug malfunctions include the following: Incorrect spark plug gap adjustment. If the gap is too small, it not only limits the contact area between the spark and the air-fuel mixture but also suppresses flame kernel growth due to the quenching effect of the electrodes. Although a spark occurs, it is weak, making it difficult to ignite the mixture. Conversely, if the gap is too large, the ignition voltage provided by the ignition system may be insufficient to generate a spark across the electrodes. Cracked spark plug skirt. High-voltage current leaks through the crack, preventing sparking at the electrodes. Carbon buildup on the electrodes, causing the central electrode to leak current to the surroundings instead of sparking to the side electrode. Excessive carbon deposits on the spark plug can short-circuit it, preventing sparking and eventually damaging the insulator, leading to spark plug failure. Damaged electrodes. Prolonged electrical erosion from sparks or chemical corrosion from combustion gases can cause electrodes to break or detach, preventing sparking. Low insulation resistance of the spark plug. This condition reduces the ignition voltage applied to the spark gap, weakening the spark or even completely disabling the ignition function. Short circuit in the high-voltage wires. If the high-voltage ignition wire from the ignition coil to the distributor leaks, the entire engine may fail to start. If the wire from the distributor to the spark plug leaks, the spark plug in one cylinder may not fire. Eroded platinum contacts. This can cause all spark plugs to fail, preventing the engine from starting or running normally. Spark plug failures manifest in the following ways: Difficulty starting the car, whether cold or hot, often requiring multiple ignition attempts. Engine shaking, noticeable while driving. Reduced power, with a noticeable lack of acceleration compared to normal conditions. Increased fuel consumption. Stalling. Failed emissions tests. Faulty spark plugs should be replaced promptly. The replacement steps are as follows: Open the hood, remove the engine's plastic cover, and disconnect the high-voltage wires, marking each cylinder's position to avoid confusion. Use a spark plug socket to remove the spark plugs one by one, ensuring no leaves, dust, or debris are present, and clean the area thoroughly. Place the new spark plug into the spark plug hole, hand-tighten it a few turns, then use the socket to fully tighten it. Reinstall the high-voltage wires in the correct firing order and reattach the cover. Spark plug replacement interval: Typically, spark plugs should be replaced every 40,000–60,000 km under normal maintenance conditions. However, this may vary depending on the brand and engine type, so always refer to the owner's manual for guidance.

3

2

Share

Is the Order of Subject Three Exam Random?

Subject Three exam order is randomized and cannot be chosen by examinees. Below are details about the Subject Three exam: 1. Exam Requirements: Subject Three consists of road driving skills and safety/civilized driving knowledge tests, each scored out of 100 points with 90 being the passing mark. 2. Training Hours Requirement: Subject Three requires 40 training hours total - 16 for theory, 4 for simulation, and 20 for practical driving. Per the syllabus, training hours are logged cumulatively with a maximum of 4 hours recordable per student daily.

11

1

Share

What engine does the 2020 Sylphy have?

2020 Sylphy is equipped with a HR16 four-cylinder 1.6L naturally aspirated engine. Here are the details about this engine: 1. This engine delivers 139 horsepower and a maximum torque of 169 Nm, with the maximum torque achieved at 4000 rpm and the maximum power at 6300 rpm. 2. This engine features e-VTC technology and multi-point fuel injection, and uses an aluminum alloy cylinder head and block. It is paired with either a 5-speed manual transmission or a CVT transmission.

16

3

Share

What brand is the red motorcycle oil?

Motorcycle red oil is GT oil, and GT oil is the abbreviation for GT Magic Red oil. Introduction to GT Magic Red oil: The GT Magic Red brand of oil is rarely seen in the market, and many people are unfamiliar with it. However, for car owners who have used this brand of oil, GT Magic Red oil is a very good oil brand. The series of this oil brand: GT Magic Red oil is divided into three series: Turbo Series, Naturally Aspirated Series, and Professional Player Series. If you want to experience the performance of this brand's oil, you can place an order on the brand's official website.

12

0

Share

What to Do When Tire Pressure Warning Keeps Showing?

What is the fuel consumption of the Geely Vision X3?

How many years is the validity period before taking the Subject 1 test for a driver's license application?

What Are the Common Spark Plug Failures?

Is the Order of Subject Three Exam Random?

What engine does the 2020 Sylphy have?

What brand is the red motorcycle oil?

Where to Buy Imported Cars at Tianjin Port?

What type of driver's license is required for a 17-seater bus?

Is the Teramont equipped with a supercharged engine?

Why Can't the Smart Key Open the Car Door?