···
Log in / Register

What to Do When Tire Pressure is Lost?

4 Answers
SanNaomi
07/29/25 5:59am

Tire pressure loss could be due to a damaged tire pressure sensor, and a simple reset might solve the issue. It is recommended to visit a service station to check the tire pressure. Strictly speaking, tire pressure refers to the air pressure inside the tire. In terms of car maintenance, the engine is the heart of the car, and its damage can lead to the end of the car's life. Tire pressure is the blood pressure of the car, and its level plays a crucial role in the car's performance and power. Tire pressure is an indicator of the car's load capacity. The load capacity of the car depends on the tire pressure. According to the relationship between the tire's load index, tire pressure, and load capacity, the higher the tire pressure, the greater the load capacity; the lower the pressure, the smaller the load capacity.

Was this review help?
4
2
Share
SanChristopher
08/12/25 8:48pm

If I find a flat tire, I usually release the accelerator immediately to slow down, turn on the right turn signal, and gradually pull over to a safe spot. I then activate the hazard lights to alert vehicles behind me. After getting out of the car, I check the tire condition. If it's just low pressure, I can use the portable electric air pump I carry to temporarily inflate it to the normal level and drive to a nearby repair shop. If the tire has an obvious puncture, leak, or is completely flat, never force driving to avoid damaging the wheel rim or risking a blowout. The best option is to replace it with the spare tire: use a jack to lift the car, remove the damaged tire, and install the spare, making sure to tighten the bolts properly. Note that the spare tire is only for temporary use with a maximum speed limit of 80 km/h. If you don’t know how to change it, it’s best to call roadside assistance or contact your insurance company for help.

I make it a habit to check tire pressure weekly with a gauge to ensure it meets the standard, avoiding unnecessary trouble from unexpected incidents while driving. A quick visual inspection of the tires before heading out can also help prevent issues like nail punctures or leaks. Safety always comes first—don’t overlook these small details, as they can protect both you and others in critical moments.

Was this review help?
20
4
Share
Expand All
OPeyton
10/03/25 8:25am

When encountering tire pressure loss, I usually find a flat and spacious spot to park, turn off the engine, and activate the hazard lights. After getting out of the car, I check which tire is affected and use a pressure gauge to measure it. If it's just a minor leak, I'll use a portable air pump to inflate it slightly and drive to the nearest repair shop for a patch. If the tire is severely flat, I'll just change to the spare tire myself: first, use wheel chocks to secure the wheels to prevent rolling, then slowly raise the car with a jack, remove the damaged tire, install the spare, and tighten all the bolts. Remember, a spare tire isn’t a permanent solution—avoid highways and drive slowly to the repair shop. Keeping a small toolkit in the car for emergencies is very practical. Last time I handled it this way, I felt like I leveled up a bit in experience. Regular tire checks are key, especially during seasons with temperature fluctuations, as tire pressure can vary. Checking once a month saves hassle and improves fuel efficiency. Developing good habits reduces the chance of small issues turning into big problems, making driving more worry-free.

Was this review help?
5
2
Share
Expand All
StMiguel
11/17/25 3:17am

When a tire loses pressure, first remain calm and safely pull over. Steering wheel vibration or unusual noises are clear warning signs; after stopping, turn on hazard lights. Check the tire pressure yourself—if it's too low, don't push it. Driving slowly to a repair shop increases risks. A simple solution is to change to the spare tire, ensuring the car is stable to prevent slipping. Spare tires are only suitable for short distances at low speeds; head to a repair shop promptly. For long-term prevention, regular inspections are crucial. Check tire pressure monthly to maintain standard levels and avoid leaks, punctures, or wear. During routine car washes, inspect tire surfaces and remove debris to minimize issues. Beginners should also learn basic handling—keeping a portable air pump or tire repair kit on hand is very convenient for emergencies.

Was this review help?
17
3
Share
Expand All
More Forum Discussions

Does the Nissan Sylphy require bumper removal for fog light replacement?

The Nissan Sylphy does not require bumper removal for fog light replacement. Below is relevant information about fog lights: 1. Function: The purpose of fog lights is to make the vehicle visible to others during foggy or rainy conditions when visibility is significantly affected by weather. Therefore, fog light sources need to have strong penetration capability. Most vehicles use halogen fog lights, while LED fog lights represent a more advanced option. 2. Activation conditions: According to traffic regulations, when visibility is between 100-200 meters, fog lights, low beams, position lights, and tail lights must be activated. The speed should not exceed 60 km/h, and a distance of over 100 meters should be maintained from the vehicle ahead.
15
1
Share

What type of engine oil does the Rena use?

The engine oil specification for the Rena is 5W-20, which is the original Beijing Hyundai factory oil. For later maintenance and oil changes, you can choose international brands such as Mobil, Shell, Castrol, and Total, or domestic brands like Great Wall, Kunlun, Tongyi, and Longpan. The official manual recommends the 5W-20 specification, and any oil of the same specification can be used. The viscosity of engine oil changes with temperature, so it's important to pay attention to its performance under both low and high temperatures. For example, in 5W-30, the first number indicates low-temperature fluidity. 5W means it can withstand temperatures as low as -30°C. The smaller this number, the better the low-temperature fluidity, making cold starts smoother for the car. The second number represents the kinematic viscosity of the oil at 100°C. A higher number means the oil can maintain its viscosity index better at high temperatures, which can also be understood as better lubrication performance under high-temperature conditions. The method for changing the Rena's engine oil is as follows: Wait for the engine temperature to cool down, allowing the oil to flow back into the oil pan; Use a wrench to loosen the oil drain plug and place an oil pan underneath to catch the old oil until no more oil flows out. Start the engine and let it run for 30 seconds to allow the oil in the main oil passage to drain out; Use a special wrench to remove the oil filter; Apply some oil to the oil seal of the new oil filter and tighten it clockwise by hand; Add the new oil through the engine valve cover filler port. Typically, fill up to three-quarters of the oil bottle; Start the engine and let it run for 5 minutes, checking for any leaks around the oil drain plug and oil filter. If there are leaks, perform necessary repairs; After stopping the engine, pull out the oil dipstick and check that the engine oil level is within the standard range.
13
5
Share

How to Deal with a Level 2 Flooded Car?

If the vehicle is flooded, notify the insurance company and request an on-site inspection by the insurance company. Disconnect the negative terminal of the battery and shift the transmission to neutral to avoid accidental startup during towing.
5
4
Share

How Long Can China V Vehicles Be Driven After China VI Implementation?

After the implementation of China VI standards, China V vehicles can still be driven for at least 13 more years, for the following reasons: 1. Large market share: Compared to China II and China III vehicles, China IV and China V vehicles account for over 60% of the market share. In 2017, the number of China IV and China V vehicles nationwide accounted for 69.5% of all vehicle types, totaling nearly 150 million vehicles. 2. Slowing down of traffic restriction policies: Current traffic restriction policies are slowing down. A report in China Daily predicted that the buffer period for traffic restriction policies would be more than 3 years. Moreover, because traffic restriction policies actually involve the exercise of citizens' property rights, the 2015 revision of the Air Pollution Prevention and Control Law removed the authorization that allowed local governments to impose traffic restrictions on motor vehicles.
4
3
Share

Where to Apply for a Motorcycle License?

The vehicle management offices of the traffic management departments under the municipal public security authorities in directly-administered municipalities, or the vehicle management offices of the traffic management departments under the public security authorities at the prefecture level or equivalent, are responsible for handling motor vehicle license business within their respective administrative jurisdictions. Here is more information about the vehicle license: 1. Relevant regulations: According to the "Road Traffic Safety Law of the People's Republic of China," motorcycles must be inspected every 2 years within the first 4 years; after 4 years, they must be inspected annually. 2. Replacement method: If a motor vehicle license is lost or damaged, the owner should apply for a replacement at the vehicle management office where the vehicle is registered. When applying, the owner must fill out an application form and submit proof of identity. The vehicle management office should reissue or replace the license within one day of accepting the application.
17
3
Share

What is the process for vehicle inspection?

The specific process for vehicle inspection is as follows: 1. Exterior inspection: Prepare the fire extinguisher and triangular warning sign in the vehicle, open the engine compartment and trunk, and wait for the staff to inspect. It is important to note during the exterior inspection whether safety devices such as the triangular warning sign and fire extinguisher are complete, and whether the color and appearance of the vehicle body match the photo on the vehicle license. 2. Pay the inspection fee and enter information: Go to the procedure hall to pay the fee and enter the information. 3. Online inspection: Mainly check the vehicle's exhaust, brakes, lights, chassis, etc. Here is a reminder for car owners who like modifications: before the annual inspection, restore your beloved car to its original condition, otherwise it will not pass the inspection.
19
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.