What to Do When There's No Sound When Playing Music via Bluetooth in the Car

1 Answers
LaEverly
07/30/25 9:20am
When connecting to the car's Bluetooth, you may encounter situations where there is no sound. Here are detailed explanations: 1. The phone or car is muted: When the car's multimedia system volume or the phone's volume is not turned on, there will be no sound when playing music via Bluetooth. While playing music, press the phone's volume button to adjust the phone's volume. Adjust the media volume to the maximum, then adjust the volume on the car. 2. Incompatible pairing code: Some phones' music playback programming is incompatible with certain car models' pairing codes, so you can only make calls but not listen to music. You need to change the Bluetooth playback frequency band. If the car's Bluetooth multimedia music is not enabled, you need to set it to turn on.
Was this review help?
20
2
Share
More Forum Discussions

What are the reasons for the Mondeo's air conditioning not cooling?

Below are the reasons and solutions for the Mondeo's air conditioning not cooling: 1. Lack of refrigerant or overcharging of refrigerant: Use a pressure gauge to check the system's high and low pressure. Normally, the high pressure should be around 13.7 bar, and the low pressure should not be less than 2.5 bar. If the pressure gauge shows very low or no pressure, it is necessary to pressurize the system to check for leaks, then evacuate, add refrigeration oil, and recharge with refrigerant. 2. Refrigerant present, but compressor not working: Generally, the compressor may not work if the external temperature is too low. If the compressor is not working, it could be due to wiring issues, a damaged air conditioning pressure switch, or a faulty electromagnetic clutch. 3. Dirty condenser leading to poor heat dissipation: This affects the air conditioning's cooling performance. The condenser surface can be cleaned with a water jet. 4. Dirty air filter: Replace the dust filter. Regular air conditioning system maintenance includes replacing the filter, using cleaning agents, and dismantling for thorough cleaning.
13
5
Share

What is the malfunction of the car SOS emergency call function?

When the car SOS emergency call function is malfunctioning, it indicates a system failure, and the vehicle should be taken to a repair facility for inspection and maintenance. SOS is an in-vehicle self-rescue system. When the vehicle encounters a malfunction or accident, or when facing dangerous and sudden situations, pressing the SOS button for more than 2 seconds will automatically send a distress signal and actively call emergency services. Additional information: 1. Vehicle SOS includes: The SOS button is usually located near the sunroof controls on the ceiling and is typically red with the letters SOS marked on it. The in-vehicle SOS system generally consists of the SOS button, an emergency horn, a microphone, and an antenna. 2. Function: The SOS emergency call function is designed to automatically send a distress signal and actively call emergency services when the vehicle malfunctions or is involved in an accident, or when facing dangerous and sudden situations, by pressing the SOS button for more than 2 seconds. Occupants can communicate with emergency services through the emergency microphone. In emergency situations, the SOS emergency call can provide emergency rescue services based on user feedback, offering convenience and peace of mind to drivers and passengers.
7
3
Share

What does LaCrosse 552T represent?

LaCrosse 552T represents that it is equipped with a 1.5T engine, a 9-speed HYDRA-MATIC intelligent transmission, econnect2.X connectivity technology, and Turbo turbocharging. The details are as follows: 1. The first digit: The first digit represents the engine torque, where 6 indicates torque ≥350N·m, generally referring to a 2.0T engine; 5 indicates torque between 250~350N·m, generally referring to a 1.5T engine; and 3 indicates 200~250N·m, generally referring to a 1.3T engine. 2. The second digit: The second digit represents the transmission gears, where 5 indicates a 9-speed HYDRA-MATIC intelligent transmission; 3 indicates a CVT intelligent continuously variable transmission; and 2 indicates a 6-speed DSS intelligent transmission. 3. The third digit: The third digit represents the connectivity system version, where 3 indicates econnect3.X connectivity technology and 2 indicates econnect2.X connectivity technology. 4. The fourth letter: The fourth letter T stands for Turbo turbocharging.
2
5
Share

Does Leaving Windows Open While Locking the Car Consume a Lot of Power?

Leaving windows open while locking the car does consume power, but the amount is not significant. After the car is turned off, the power supply is not completely disconnected. For example, the anti-theft alarm and warning lights continue to operate. Additionally, many sensors in the car are powered by the battery. If the windows are left open, the car will not enter sleep mode, causing more sensors to remain active and consume additional power. Hazards of leaving windows or doors open after parking and turning off the engine: 1. Draining the battery: Before parking and turning off the engine, ensure all electrical devices are turned off. Once the engine is off, it stops generating electricity, and closing windows or other electrical devices at this point can overload the battery. Always close the doors properly when locking the car; otherwise, it will increase power consumption. In severe cases, the battery could be completely drained overnight. 2. Accelerating battery discharge: The battery naturally discharges about 1% per day. If the car is left unlocked or windows and doors are left open for an extended period after turning off the engine, it not only speeds up power consumption but also worsens the battery's discharge, affecting the car's ability to start.
6
0
Share

What is the fuel consumption of a scooter?

Currently, most scooters on the market are mainly 125cc in displacement. Under economical driving conditions, the fuel consumption of a 125cc scooter ranges between 1.5L-2.2L per 100 kilometers. However, the fuel consumption performance of a scooter is influenced by various factors such as the model's displacement, engine performance, fuel supply system, driving habits, and current road conditions. Here are some ways to reduce fuel consumption for scooters: 1. Purchase a motorcycle with good engine performance: Scooters with good engine performance (such as electronic fuel injection types) are very fuel-efficient. Although they may be more expensive, they are cost-effective in the long run. Some low-quality scooters, while cheap, consume a lot of fuel. 2. Pay attention to daily maintenance (frequent oil changes and air filter replacements): In the daily maintenance of scooters, frequent oil changes and air filter replacements are crucial. Change the oil approximately every 1,500 kilometers (use high-quality oil) and replace the air filter every 2,000 kilometers. 3. Choose high-quality tires: Scooters have a low chassis, making tires very important. When selecting tires, consider the brand and quality, and it is recommended to follow the advice of a maintenance technician.
6
0
Share

Ground Clearance of Model Y?

The minimum ground clearance of Model Y is 150mm. The minimum ground clearance of Model Y refers to the distance between the lowest point (excluding the wheels) and the supporting plane, which indicates the vehicle's ability to pass over obstacles such as stones and stumps without collision. The higher the ground clearance of Model Y, the better its off-road capability. However, if the ground clearance is too high, the stability at high speeds may decrease. Model Y is the fifth vehicle launched by Tesla since its establishment in 2003. Its body dimensions are: length 4750mm, width 1921mm, height 1624mm, with a wheelbase of 2890mm. Generally, the ground clearance of sedans ranges between 110mm and 150mm, while SUVs have a ground clearance between 200mm and 250mm. However, the ground clearance of Model Y is not static; it also depends on the load condition. Therefore, changes in ground clearance should be considered based on the load variations of the Model Y. When selecting a vehicle, ground clearance can be one of the reference factors. The choice should depend on the vehicle's intended use and the road conditions. For urban areas with good road surfaces, vehicles with lower ground clearance can enhance stability and comfort. For long-distance travel or regions with poor road conditions, vehicles with higher ground clearance are preferable to avoid scraping or damaging the chassis, considering the vehicle's off-road performance.
4
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.