What to Do When There's No Sound Playing Music via Bluetooth in the Territory?

2 Answers
DiReese
07/29/25 4:36am
Car wipers should be replaced every 1 to 2 years. Since car wipers are made of rubber material, they will age during use and need to be replaced in time to avoid poor performance during use, which may affect normal driving. Wipers, also known as windscreen wipers, are devices used to wipe away raindrops and dust attached to the vehicle's windshield to improve the driver's visibility and increase driving safety. Due to legal requirements, almost all cars everywhere are equipped with wipers. Rear windows of vehicles such as hatchbacks and SUVs are also equipped with wipers. In addition to cars, other means of transportation, such as trains and trams, are also equipped with wipers.
Was this review help?
7
2
Share
SilasAnn
08/12/25 8:18am
I recently encountered the issue of no sound during Bluetooth playback while driving my Ford Territory. That time in the car when I wanted to listen to music, I found no sound coming out. So I first pulled over to carefully check if the phone's Bluetooth connection showed normal pairing, and then discovered that the media audio output on the phone wasn't defaulted to the car's system. I manually switched it to try. Next, I turned up the volume button on the car's central control screen, and it worked. Sometimes when the system has too much cache and lags, I restart the car's infotainment system by holding the power button for a few seconds to reset, and the problem goes away. Another time, after a phone software update, the settings changed, and reconnecting the Bluetooth device solved it. Keeping devices updated can reduce trouble. If problems persist, I recommend visiting Ford's after-sales service to check if there are minor bugs in the module. From personal experience, don't overlook the basic steps—it can save you a lot of hassle.
Was this review help?
3
3
Share
Expand All
More Forum Discussions

What to Do If You Discover Repainted Areas When Purchasing a New Car?

You can request the 4S store to replace the car with a new one. If the 4S store refuses, you can directly apply for a refund and demand triple compensation, or file a lawsuit in court. Methods to identify whether a new car has been repainted: 1. Check for color differences: Due to variations in paint color and repainting techniques, a repainted used car will inevitably have some color difference compared to the original paint. Under good lighting conditions, the owner can inspect the car from multiple angles to carefully observe any color discrepancies. You can also place your hand on your forehead at a 45-degree angle to the car body and judge whether the area has been repainted by comparing the brightness of the reflected light, as repainted areas usually reflect light more dimly. 2. Feel the smoothness: After a used car has been repainted, the repainted areas may exhibit microscopic unevenness that can be detected by touch. Although painters may use sandpaper for water sanding to improve the smoothness of the repainted surface, even with careful operation, it cannot restore the original factory-level smoothness. 3. Listen to the knocking sound to determine if the car has been repainted: You can also tap the car body with your fingers and judge by the sound. A crisp sound indicates that the area has not been repainted. 4. Inspect edges and seals: Examine the edges, seals, decorative strips, and rubber seals of the car body for any residual paint marks. If the car has been repainted, traces will inevitably be left in these areas. Pay special attention to the paint on the engine hood. If you notice that the paint layer lacks the fullness of the original paint or shows signs of orange peel, sagging, pinholes, bubbles, cracks, discoloration, or putty marks, it may indicate repainting.
8
2
Share

What is the appropriate tire pressure for the Q5?

A tire pressure of 2.4-2.5 bar is most suitable for the Audi Q5. Due to seasonal factors, the tire pressure can be appropriately increased by 0.2 bar in winter and reduced by 0.1 bar in summer. This data is based on the international GBT2978-2008 standard requirements. The Audi Q5's tire pressure monitoring can be viewed on the central display. The tire pressure monitoring system uses ABS tire speed sensors to detect differences in rotation speeds between tires, determining if there is abnormal tire pressure. If an abnormality is detected, it will prompt immediately. Generally, a tire pressure above 2.8 bar is considered too high, while a pressure below 2.0 bar is too low. Hazards of overinflated tires: Reduced tire friction and adhesion, affecting braking performance; causes steering wheel vibration and deviation, reducing driving comfort; accelerates wear on the central tread pattern, shortening tire lifespan; increases vehicle vibration, indirectly affecting the lifespan of other components; overstretches tire cords, reducing elasticity and increasing the load on the vehicle during driving. Hazards of underinflated tires: Increased friction coefficient with the road surface, leading to higher fuel consumption; makes the steering wheel heavy and prone to deviation, compromising driving safety; increases movement in various parts of the tire, causing abnormal heat due to excessive rolling; reduces the functionality of cords and rubber, leading to delamination or cord breakage and excessive friction with the rim, damaging the tire bead and causing abnormal wear; multiplies friction between the tire and ground, rapidly increasing tire temperature, softening the tire, and drastically reducing strength. High-speed driving may result in a tire blowout. If the tire pressure monitoring indicator light illuminates (a yellow symbol with an irregular circle, no stamp on top, four small spikes below, and an exclamation mark inside), there are generally three possible reasons: Abnormal tire pressure: Typically, it will alert if the pressure is below 1.8 bar or above 3.0 bar. In this case, tire inspection and pressure adjustment are required. Tire pressure monitoring not reset: After inflating the tires, if the tire pressure is not reset promptly, the system will still record the previous data, causing the indicator light to illuminate. Simply reset the tire pressure to resolve this issue. Damaged tire pressure sensor: The tire pressure sensor, installed inside the tire and connected to the inflation valve, monitors tire pressure. If the sensor is damaged due to impact while driving, it can trigger the tire pressure warning light. For sensor damage, replacement with a new part is the only solution.
11
5
Share

What should you do when visibility is between 100 and 200 meters?

Turn on fog lights, low beams, clearance lights, and front and rear position lights. The speed should not exceed 60 kilometers per hour, and maintain a distance of more than 100 meters from the vehicle in front in the same lane. Turn on fog lights, low beams, clearance lights, front and rear position lights, and hazard warning flashers. The speed should not exceed 40 kilometers per hour, and maintain an appropriate distance from the vehicle in front.
11
2
Share

What does it mean to check the engine oil level at the next refueling?

Checking the engine oil level at the next refueling is a reminder for the driver to inspect the coolant level in the vehicle's engine during the next fuel stop. The coolant in a car engine naturally decreases over time. A small reduction is normal, but a significant drop may indicate a leak in the antifreeze system. When adding coolant, ensure the engine has cooled down. Start the engine and gently press the accelerator to expel any air from the system while slowly adding the coolant to achieve the proper level. If necessary, follow the instructions in the manual to bleed the cooling system.
1
0
Share

What are the solutions for high temperature in a four-cylinder diesel engine?

The solutions for high temperature in a four-cylinder diesel engine are: 1. Avoid prolonged overload operation; 2. Conduct regular inspections during daily use and promptly replenish fluids in the diesel engine's mechanical equipment; 3. Tighten or replace the fan belt, and if the cooling fan is faulty, repair the motor and circuit. The causes of high temperature in a four-cylinder diesel engine are: 1. Insufficient coolant; 2. Loose or faulty fan belt; 3. Radiator leakage; 4. Poor radiator cooling performance; 5. Thermostat failure. A four-cylinder engine, also known as an engine, is a machine capable of converting one form of energy into another more useful form, typically transforming chemical energy into mechanical energy.
10
1
Share

What vehicles can be driven with a small car driving permit?

With a small car driving permit, you can drive the following types of vehicles: 1. Small and mini passenger vehicles, as well as light and mini cargo vehicles; 2. Light and mini special operation vehicles, small and mini automatic transmission passenger vehicles, light and mini automatic transmission cargo vehicles, low-speed cargo vehicles, and three-wheeled vehicles. Here is additional information: 1. The C1 driver's license allows driving (including all models under C2, C3, C4) small and mini passenger vehicles, light and mini cargo vehicles, and light, small, and mini special operation vehicles. 2. The examination subjects include four items: traffic regulations and related knowledge, field driving, road driving, and safe and civilized driving knowledge.
19
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.