What to Do When There Is Dust on the Car?

1 Answers
AthenaRose
07/29/25 7:17pm
For surface dust, you can use a feather duster to sweep it away. For stubborn dust, first rinse off the sand particles on the car's surface with clean water. After rinsing, evenly spray car wash detergent on the body, then use a towel or sponge to clean each part of the car thoroughly.
Was this review help?
6
0
Share
More Forum Discussions

Can a Financed Car Be Sold in a Used Car Dealership?

A financed car can be sold in a used car dealership, and there are specialized used car markets that accept financed cars, but the disadvantages outweigh the advantages. General used car markets: They usually do not accept financed cars because the ownership cannot be transferred, failing to meet the actual standards of a sale. Used car dealers are also afraid of getting stuck with the car. Specialized markets that accept financed cars do exist, and there are people who specifically handle such transactions. However, the price offered will be relatively low. Transferring ownership during the financing period: You can try to gather the remaining loan amount, then go to the bank to complete the release of the mortgage registration. After retrieving your vehicle title (green book), you can proceed with the sale.
12
4
Share

What are good methods to solve car window fogging?

Car window fogging can be solved in the following ways: Press the defogger button, turn on the air conditioning cooling (A/C) switch, and activate the external circulation to remove fog. Use the air conditioning cooling and dehumidification function to reduce air humidity and eliminate fog. Use the method of reducing the temperature difference to remove condensation. Spray anti-fog agents to prevent dirt and stains on the windows. Open windows for convection; the air inside and outside the car will form a convection current, reducing the temperature difference and gradually dissipating the fog. The reason for car window fogging: There is a certain temperature difference between the inside and outside of the car. If the temperatures inside and outside are different, the surface with the lower temperature will have a lower saturated vapor pressure than the surrounding environment, causing water vapor to gather on the glass surface and form tiny droplets, resulting in fog. Press the defogger button, turn on the air conditioning cooling (A/C) switch, set the temperature to the lowest, and activate the external circulation to remove fog. Both cold and warm air can be used to defog car windows, but warm air is slower than cold air. The most effective method is to use cold air, as it blows dry cold air directly onto the glass, preventing water vapor from condensing on the glass and achieving defogging. The method of using warm air is the same as cold air, but note that warm air should not be used on rainy days, as it may initially worsen the fog. Always use external circulation when defogging car windows. Methods to defog car windows: Air conditioning cooling: Use the air conditioning cooling and dehumidification function to reduce air humidity and eliminate fog. In summer, especially when multiple people enter the car, if the air conditioning is not turned on promptly, the humidity from exhaled breath can quickly cause the windshield to fog up. At this time, turn on the air conditioning to blow cold air onto the windshield, using the dehumidification function to quickly remove fog. If the humidity is too high and the air conditioning is not effective, slightly open the windows to rapidly reduce the humidity inside the car. Combining this with the air conditioning will yield faster results. Air conditioning warm air: Use the method of reducing the temperature difference to remove condensation. In winter, blow warm air onto the windshield to quickly raise its temperature and reduce the temperature difference between the inner and outer surfaces of the glass, preventing excessive fogging. However, the rear and side windows heat up more slowly, so it takes longer to completely remove the fog. Whether the air conditioning is automatic or manual, turning it on helps with dehumidification. Do not set the air conditioning temperature to the coldest position, as this may cause frost to form on the outer surface of the windshield over time. Spray anti-fog agents for prevention: Spray a small amount of defogging agent on the car windows and wipe it clean to remove dirt and stains. While polishing the glass, a thin transparent protective film is formed, effectively preventing water vapor from condensing on the glass and forming fog, especially suitable for cold winters. Alternatives to anti-fog agents include dish soap, soapy water, glycerin, alcohol, or salt water. After drying, use chamois or a soft dry cloth to remove excess fibers, ensuring the car windows remain fog-free for several days. Open windows for convection: If the fog inside the car is not too heavy, open the side windows to allow air inside and outside the car to form a convection current, reducing the temperature difference and gradually dissipating the fog. The principle of this method is the same as using cold air from the air conditioning. The downside of opening windows for convection is obvious: it cannot be used during rain or snow, on highways, or when the fog is heavy.
5
1
Share

What does the yellow dashed line between double arrows indicate?

The yellow dashed line between double arrows is the marking for a tidal flow lane. Tidal phenomenon: Due to the 'tidal phenomenon' in traffic flow, where the morning rush hour sees heavier inbound traffic with lighter outbound flow, while the evening experiences the opposite pattern with heavier outbound traffic, exacerbating congestion. Solution to this situation: To address this, traffic management employs reversible lanes during roadway modifications. Specifically: during morning peak hours when inbound traffic is heavier, the number of inbound lanes is increased while outbound lanes are decreased; conversely, during evening peak hours with heavier outbound flow, outbound lanes are increased and inbound lanes are reduced.
13
5
Share

Should the negative terminal be disconnected first when removing a car battery?

When removing a car battery, the negative terminal should be disconnected first. This is because the negative terminal of the car is connected to the vehicle body, and since the body is made of metal, the entire vehicle is essentially connected to the negative terminal. Therefore, the moment the negative terminal is disconnected, the car's electrical circuit is broken (the battery can no longer supply power). Daily inspection of the battery: Car owners should regularly inspect the car battery during daily use. This can be done by checking the observation window on the battery. If the observation window shows black, it indicates that the battery needs charging. If it shows green, the battery is in good condition. If it shows white, it means the electrolyte level is insufficient. Precautions for vehicle use: Avoid parking the car in an open parking lot for extended periods. If the car must be parked for a long time, the battery should be removed and taken away to prevent it from freezing and getting damaged.
16
3
Share

What Causes a Wide Left Side When Reversing into the Left Parking Space?

Failure to control the distance between the car body and the corner of the parking space. The solution is to turn the steering wheel to the left, with the degree of turning depending on the progress of reversing. Key points for reversing into a parking space: When reversing into the right parking space, observe the left rearview mirror before turning the steering wheel. After turning the steering wheel fully to the right, observe the right rearview mirror. When straightening the steering wheel, observe the left rearview mirror again. Once confirmed that both front and rear wheels can enter the space, observe both sides to make minor adjustments to the car body. Methods for adjusting the car body: Use the distance between the car body and the boundary line as the adjustment standard. If the rear of the car is closer to the right boundary line of the parking space, turn the steering wheel to the left for adjustment. Conversely, if it is closer to the left boundary line, turn the steering wheel to the right for adjustment.
2
3
Share

What to Pay Attention to When Getting Your Car Repaired at a 4S Shop?

When getting your car repaired at a 4S shop, pay attention to the following points. First, if the vehicle is under warranty, choose the 4S shop where you purchased the car for repairs. Second, make sure to understand the pricing before the repair, as 4S shop prices tend to be higher. Third, confirm the car's scratched or damaged areas with the staff before the repair to avoid additional scratches being added during the process. It's Best to Choose a 4S Shop: Many people might think 4S shops charge higher prices and opt for ordinary repair shops instead. However, if possible, it's better to go to a 4S shop because the technical skills of workers in repair shops vary, and there's no guarantee you won't encounter a less skilled technician. In contrast, 4S shops offer better quality assurance. It's Best to Supervise the Repair: If you're really going for a repair, it's advisable to watch the workers while they fix your car. Without supervision, workers may not take good care of the car. Having someone oversee the process tends to make the repair personnel more careful.
1
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.